Code Alarm CA 310 - Manual
Code Alarm CA 310 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – PASSIVE ARMING THE SYSTEM:; If the passive arming feature has been selected:; PROTECTION WHILE THE SYSTEM IS ARMED:
- Page 4 – Enter the vehicle, and turn the ignition key to the ON position.; MANUALLY OVERRIDING YOUR SYSTEM:; Turn the ignition key to the ON position.
- Page 5 – ELIMINATING/RETURNING THE NORMAL ARM/DISARM CHIRPS; ALARM SIREN CHIRP INDICATION; SYSTEM FUNCTIONS AT A GLANCE
128-6530
1 of 10
CA 310 Owners Manual
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
128-6530 2 of 10 Page 2 Your system has many features and available options some of which areselected at time of installation. Consult your installing dealer for options thatmay have been installed and are not listed. ARMING THE SYSTEM: 1. Turn the engine OFF, exit the vehicle, and close all doors, ...
128-6530 4 of 10 Page 4 If the LED flashes 4 times...pause, 4 times...pause etc., then an intrusionattempt was made by impact or a strong vibration that the shock sensordetected. Check the vehicle for possible damage to the glass or body panels. NOTE: The LED intrusion warning indications are stored...
128-6530 5 of 10 Page 5 ELIMINATING/RETURNING THE NORMAL ARM/DISARM CHIRPS You can selectively eliminate the normal arm & disarm chirps using the valet/override switch, following these steps. 1) Turn the ignition key ON the OFF. 2) Within 10 seconds of turning the ignition key OFF, press and rel...
