Code Alarm CA 110 - Manuals

Code Alarm CA 110 – Manual in PDF format online.

Manuals:

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10

Summary

Page 3 - If the passive arming feature has been selected:; PROTECTION WHILE THE SYSTEM IS ARMED:

PASSIVE ARMING: If the passive arming feature has been selected: Turn the engine OFF, exit the vehicle, and close all doors, hood and trunk. The dash mounted LED will begin to flash rapidly indicating that the 30second passive arming timer has begun. If the LED does not begin to flashrapidly, then y...

Page 5 - Enter the vehicle, and turn the ignition key to the ON position.

Page 5 parking lights will flash 3 times. Enter the vehicle and before turning on theignition switch, observe the LED flash pattern. If the LED flashes 2 times... pause, 2 times... pause etc., then an intrusionattempt was made to open the hood, trunk, or by an accessory triggeringdevice. Check the v...

Page 6 - Turn the ignition key to the ON position.; ELIMINATING THE NORMAL ARM/DISARM CHIRPS

Page 6 MANUALLY OVERRIDING YOUR SYSTEM: USING THE VALET SWITCH/ MANUAL OVERRIDE Your system can be disarmed without the use of the keychain transmitter. Thisis necessary, since you will need the ability to operate your vehicle if thetransmitter is lost or its battery fails. To by-pass the alarm syst...

Code Alarm Manuals