Code Alarm CA 110 - Manual
Code Alarm CA 110 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – If the passive arming feature has been selected:; PROTECTION WHILE THE SYSTEM IS ARMED:
- Page 5 – Enter the vehicle, and turn the ignition key to the ON position.
- Page 6 – Turn the ignition key to the ON position.; ELIMINATING THE NORMAL ARM/DISARM CHIRPS
- Page 8 – SYSTEM FUNCTIONS AT A GLANCE
CA 110 Owners Manual
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
PASSIVE ARMING: If the passive arming feature has been selected: Turn the engine OFF, exit the vehicle, and close all doors, hood and trunk. The dash mounted LED will begin to flash rapidly indicating that the 30second passive arming timer has begun. If the LED does not begin to flashrapidly, then y...
Page 5 parking lights will flash 3 times. Enter the vehicle and before turning on theignition switch, observe the LED flash pattern. If the LED flashes 2 times... pause, 2 times... pause etc., then an intrusionattempt was made to open the hood, trunk, or by an accessory triggeringdevice. Check the v...
Page 6 MANUALLY OVERRIDING YOUR SYSTEM: USING THE VALET SWITCH/ MANUAL OVERRIDE Your system can be disarmed without the use of the keychain transmitter. Thisis necessary, since you will need the ability to operate your vehicle if thetransmitter is lost or its battery fails. To by-pass the alarm syst...
