Cisco IGX 8 - Manuals - manualsarea.com

Page 2 - Voice Circuit Support

-2 IGX 8 Installation Manual, Release 8.2.0 Voice Circuit Support Input AC PowerConnector: IEC 16 Amp input connector. 6 different power cords are availableto comply with the standards of individual countries. Power cordsare 6 feet (about 2 meters) long. See AC Power Cabling for details. DC Input Co...

Page 3 - Data Channel Support

-3 Data Channel Support Sync. Data Interfaces: RS-232C/D, RS-449/422, V.24, X.21, and V.35with IGX 8 as DCE or DTE. High-Speed Data Rates(HDM): 2.4 Kbps to 1.344 Mbps. Low-Speed Data Rates: 2.4 to 19.2 Kbps per LDM port. Ports per card: LDI: 4 or 8.SDI: 4. Control Leads Supported: SDI: Per interface...

Page 4 - Digital Data Service Interface

-4 IGX 8 Installation Manual, Release 8.2.0 Digital Data Service Interface Ports per card: Four. Electrical Interface: Digital Data System (DDS)—AT&T Pub. 62310, November 1987. Interface Type: DSU or OCU (software selectable). Data Rates: 2.4, 4.8, 9.6, 19.2, and 56 Kbps (software selectable). D...

Page 5 - T1 Interface

-5 T1 Interface Line Rate: 1.544 Mbps, ± 50 bps ( ± 200 bps VCO lock range). Line Code: Bipolar AMI or B8ZS. Framing Formats: Fractional T1, adjacent or alternating channels.Minimum of four DS0 channels required. Signal Level: DSX-1 compatible. Line Impedance: Terminated = 100 Ohms nominal. Bridged ...

Page 6 - E1 Interface

-6 IGX 8 Installation Manual, Release 8.2.0 E1 Interface Line Rate: 2.048 Mbps, ± 50 bps ( ± 200 bps VCO lock range) Line Code: Bipolar AMI or HDB3 Line Impedance: 120 Ohms (balanced) or 75 Ohms (balanced or unbalanced) Minimum Pulse Density: Zero code suppression via HDB3 coding Frame Format: Unfra...

Page 7 - T3 Interface

-7 T3 Interface Line Rate: 44.736 Mbps ± 20 ppm, asynchronous. Line Code: B3ZS. Clock Source Mode: Internal (Asynchronous). Signal Level: DSX-3. Framing Formats: M13 mode, C-bit parity. Alarms Processed: AIS.LOS.Remote Alarm Indication.Loss Of Framing. Line Errors Counted: BPV.Parity Bit Errors. Rec...

Page 8 - E3 Interface

-8 IGX 8 Installation Manual, Release 8.2.0 E3 Interface Line Rate: 34.368 Mbps ± 20 ppm, asynchronous. Line Code: HDB3. Clock Source Mode: Internal (Asynchronous). Signal Level: ITU-T G.703 Framing Formats: ITU-T G.804, G.832, Alarms Processed: AIS.LOS.Remote Alarm Indication.Loss Of Framing. Line ...

Page 9 - Frame Relay Interface

-9 Frame Relay Interface Type of Service: Permanent Virtual Circuit (PVC). Data Interface: Per ITU-T I.122 and ANSI T1/S1 Standards. Data Transfer Protocol: LAP-D frame level core functions. Input Data Format: High Level Data Link (HDLC) protocol. Input Data Frame Length: Up to 4096 bytes max. Frame...

Page 11 - Network Management Control

-11 Network Management Control Network Control Terminal: StrataView Plus workstation and StrataCom software required for graphical display of network status, statistics gathering and display,and automatic downloading of software. Control Terminal: DEC VT100, WYSE 85, Televideo 970 or equivalent term...