Cisco 4840G - Manuals - manualsarea.com

Page 2 - Using the Console Port or a Management Port; Connecting a Modem; Using Passwords

3-2 Catalyst 4840G Software Feature and Configuration Guide 78-10416-02 Chapter 3 Configuring the Catalyst 4840G Processor Before Starting Up the Catalyst 4840G Using the Console Port or a Management Port You can configure the Catalyst 4840G switch from a direct console connection to the console por...

Page 3 - Configuring the Management Port; Command

3-3 Catalyst 4840G Software Feature and Configuration Guide 78-10416-02 Chapter 3 Configuring the Catalyst 4840G Processor Configuring the Management Port Configuring the Management Port The management port on the Catalyst 4840G SLB switch allows multiple simultaneous Telnet or SNMP network manageme...

Page 4 - Displaying the Operating Configuration; Enabling Fast Ethernet Client

3-4 Catalyst 4840G Software Feature and Configuration Guide 78-10416-02 Chapter 3 Configuring the Catalyst 4840G Processor Displaying the Operating Configuration The Catalyst 4840G SLB switch should now be operating correctly. You can now use Telnet to remotely assign and verify configurations. Disp...

Page 5 - Configuring a Host Name

3-5 Catalyst 4840G Software Feature and Configuration Guide 78-10416-02 Chapter 3 Configuring the Catalyst 4840G Processor Configuring a Host Name To enable Fast Ethernet client, perform the following task: Configuring a Host Name In addition to the system passwords and enable password, your initial...

Page 6 - Formatting a Flash PC Card; format; Copying the Startup Configuration File to the Flash PC Card

3-6 Catalyst 4840G Software Feature and Configuration Guide 78-10416-02 Chapter 3 Configuring the Catalyst 4840G Processor Using Flash PC Cards Formatting a Flash PC Card A Flash PC card is blank and must be formatted before use. The formatting procedure erases all information on the Flash PC card. ...

Page 7 - Viewing the Contents of Flash Memory; Determining the Current File System Device; Moving Between Flash Memory Media; Listing the Flash Memory Directory Contents; Deleting Files from Flash Memory

3-7 Catalyst 4840G Software Feature and Configuration Guide 78-10416-02 Chapter 3 Configuring the Catalyst 4840G Processor Using Flash PC Cards Viewing the Contents of Flash Memory This section describes commands you can use with the onboard Flash memory SIMM (bootflash) and Flash PC cards. Determin...

Page 8 - Booting from a Flash PC Card

3-8 Catalyst 4840G Software Feature and Configuration Guide 78-10416-02 Chapter 3 Configuring the Catalyst 4840G Processor Using Flash PC Cards The following is an example of the delete and squeeze commands used together. Note that the delete command requires you to specify the filename, while the s...

Page 9 - Backing Up a System Image to a TFTP Server

3-9 Catalyst 4840G Software Feature and Configuration Guide 78-10416-02 Chapter 3 Configuring the Catalyst 4840G Processor Using Flash PC Cards When you enter boot commands, be careful not to insert extra spaces because they affect the way the SLB switch interprets the command. For example, notice t...

Page 10 - Copying a System Image from a TFTP Server to a Flash PC Card

3-10 Catalyst 4840G Software Feature and Configuration Guide 78-10416-02 Chapter 3 Configuring the Catalyst 4840G Processor Using Flash PC Cards Copying a System Image from a TFTP Server to a Flash PC Card You should have a copy of the current system image on a Flash PC card in case the file in Flas...