Cisco 4028650000000 - Manuals

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide vii Safety Precautions, Continued 19. Replacement Parts: When replacement parts are required, be sure the service technician uses replacement parts specified by Cisco, or parts having the same operating characteristics as the or...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide ix Safety Precautions (EU Market) Mesures de SécuritéSicherheitmassnahmenPrecauciones de SeguridadWarning To prevent fire or electric shock:• Do not expose this apparatus to rain or moisture.• Avoid spilling liquids on or near t...

x D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C Safety Precautions (EU Market), Continued Caution • To protect this apparatus against damage from lightning storms and power-line surges, or when you are not using this apparatus for a long period of time, disconnect the power...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide xi Safety Precautions (EU Market), Continued Vorsicht • Um dieses Gerät vor Biltzschlag bzw. Stromüberladung zu schützen, oder wenn das Gerät längere Zeit nicht benutzt wird, soll der Stecker aus der Steckdose gezogen werden. • ...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide xiii Contents Safety Precautions ....................................................................................................................................... v Safety Precautions (EU Market) .............................

xiv D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C Contents, Continued Setting Bootable Application Selection ........................................................................4-70System Information .........................................................................

xvi D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C Contents, Continued Appendix D Compliance Applicable Notices and Disclaimer ...............................................................................D-1

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 1-1 Chapter 1 Quick Setup - Read Me First! About the Video Standard The Video Standard used to operate the receiver is preset at the factory to either NTSC (525-line), or PAL (625-line). Changing the Video Standard is normally r...

1-2 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C Quick Setup Instructions The following instructions are for use with the Remote Control. 1. Display the MAIN MENU by pressing MENU . 2. Press the  button to move to the Setup Menu and press OK . 3. Move to the Tuning / Pres...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 1-3 Quick Setup Instructions, Continued 5. The “Acquiring Network” message is displayed until the “Acquisition Status” message appears. Press OK to continue or press EXIT to cancel and return to the menu. If the dish is aligned,...

1-4 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C Rear Panels Connections D9865B Satellite Receiver D9865H Satellite Receiver

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 1-5 Rear Panels Connections, Continued D9865D Satellite Receiver Note: Only ETH1 Ethernet port is currently available.

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 2-1 Chapter 2 Introduction Overview Introduction This chapter is a general introduction to the Cisco ® D9865 Satellite Receiver. It describes the most common applications and interfaces of the receiver. In This Chapter This chap...

2-2 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C D9865 Satellite Receiver General Description The Cisco D9865 Satellite Receiver is designed for satellite content distribution and it targets the broadcast, business TV, private networks, and SMATV environment. The receiver ...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 2-3 D9865 Satellite Receiver , Continued Key Features The D9865 receiver provides the following key features:• DVB-S QPSK, DVB-S2 QPSK/8PSK demodulation• Variable QPSK symbol rates from 1 to 45 MS/s for DVB-S and 1 to 31 MS/s fo...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 3-1 Chapter 3 Front Panel Operation Overview Introduction This chapter describes how to set up the D9865 Satellite Receiver using the front panel keys and display. This information is primarily applicable for standalone operatio...

3-2 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C About the Front Panel Introduction The front panel of your satellite receiver provides controls for enabling the receiver’s video output, and for interfacing with the remote control. MUTE, SIGNAL and MENU LEDs are also provi...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 3-3 About the Front Panel, Continued To change a setting on a menu using the front panel: 1. Use the  buttons to move to the setting you want to change. Press the Select button to select the setting. 2. For numeric options, ...

3-4 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C About the Front Panel, Continued Keyboard Display Press the MENU and SELECT buttons simultaneously on the Front Panel to display a keyboard on the TV monitor. The keyboard allows alphabetical and numerical character entry in...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 3-5 Common Interface Modules Only CAMs purchased from Cisco are currently supported. The following lists the supported CAMs: Common Interface Modules Part Number Aston Professional CAM, for descrambling CONAX 4016669 Aston Consu...

3-6 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C Remote Control Functions The remote control is provided as a standard feature with the D9865 Satellite Receiver. After unpacking your satellite receiver, check that you have the following accessories (if ordered): • One IR (...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 4-1 Chapter 4 Setup and Monitoring via On-Screen Display Overview In This Chapter This chapter contains the following topics. Topic See Page Main Menu 4-3 Channel List without EPG 4-6 Introduction to the EPG 4-7 Setting Timers 4...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 4-3 Main Menu This section contains the information you need to set up your Satellite Receiver using the on-screen display menus. Before you begin using the receiver, you may need to change the current settings to suit your oper...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 4-5 Main Menu, Continued About using the on-screen menus All screens or menus are accessed from the Main Menu. While viewing any channel, you can display on-screen menus for viewing or changing the current receiver setup. While ...

4-6 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C Channel List without EPG If the receiver does not support EPG, you can access the Channel List from the Main Menu. To select a channel from the channel list: 1. From the Main Menu screen, select Channel List and press OK . T...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 4-7 Introduction to the EPG What is EPG? The Electronic Program Guide (EPG) is a convenient way to find out what is on your TV and to view a list of upcoming programs. Lists of programs are available for any date in the next 7 d...

4-8 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C Introduction to the EPG, Continued Parts of the Guide The following list describes the parts of the guide.• The program you are watching is reduced to fit in the upper right are of your screen. The program remains there whil...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 4-9 Introduction to the EPG, Continued Viewing Timers Press the blue button ( Timers ) to view all the configured timer profiles. For more information on setting up and maintaining timer profiles, see Setting Timers , on page 4-...

4-10 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C Setting Timers Setting a Reminder Timer From EPG You can set up timers that will display a reminder on-screen when the configured program is on. Note: You cannot set a timer for a program that has already started. Proceed a...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 4-11 6. Click the green button ( Save ) to save your timer settings. Note: You can set a maximum of 50 timer profiles. The following is an example of a reminder that appears on-screen: Press OK to close the reminder window and t...

4-12 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C Setting Timers, Continued Editing a Timer Profile 1. From the Main Menu, select Timers and press OK . The Timers screen is displayed. 2. From the Timers screen, scroll to the Timer profile you want to edit using the  butt...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 4-13 Setting Up Your Favorite Channels The Favorite screen displays a list of all the favorites configured in the D9865. Favorites allow you to surf through the channels you have set up as your favorite channels, skipping over o...

4-14 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C Setting Up Your Favorite Channels, Continued 3. Select Favorite Name and press OK to edit the new favorite name. Enter the name directly using the numeric keypad on the remote control or use the  buttons to change the l...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 4-15 Setting Up Your Favorite Channels, Continued 4. Press OK to confirm. Performing a Channel Scan The Channel Scan function scans through all the available channels and updates the Authorized Channels Only list. For more infor...

4-16 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C Setting Up One Button Channel Change To Set Up One Button Channel Change Proceed as follows to set up one button channel change: From the Main Menu, select One Button Channel Change and press OK . The Button colors (Red, Gr...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 4-17 Setup Menu The Setup Menu is used to set up the receiver. The available sub-menus are as follows:• Tuning / Preset From this menu, you can display and change Presets, and set up the LNB. • Dish Setup This menu provides a gr...

4-18 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C Setting up Tuning / Preset To Set Up Tuning/Preset Parameters The Tuning/Preset menu is used to display and configure the current settings. Proceed as follows to set up the tuning/preset: 1. From the Setup Menu screen, sele...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 4-19 LO Select(Sets a 22 kHz tone for Ku-band dual LNB) On Switches 22 kHz tone on. Off Off Switches 22 kHz tone off. Auto Sets 22 kHz tone to automatic.If Downlink Freq < Crossover, use LO Freq 1. The 22 kHz tone is Off.If D...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 4-21 Setting up the Preset / LNB To Set Up Preset/LNB Parameters The Preset/LNB Setup sub-menu allows you to select or configure up to 64 network presets. Your receiver may be shipped pre-configured with a number of network pres...

4-22 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C 3. Press the green button ( Save ) to save and apply the settings to the receiver. Selecting the Active Preset To change the displayed preset to the Active preset or to select a different preset as the active preset: 1. Fro...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 4-23 Setting up LNB To Set Up LNB Parameters Proceed as follows to set up the LNB: 1. From the Preset/LNB Setup menu, press the yellow button ( LNB ) to set up the LNB. Note: You can configure up to 10 LNB presets. 2. The follow...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 4-25 Setting up LNB, Continued LNB Power Settings The following table displays the LNB Power settings: LNB Power Setting NIT Contains Output LNB Voltage Off Not received Off H Off V Off 18-H Not received 18 volts H 18 volts V 18...

4-26 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C Setting Up the Satellite Dish To Set Up the Dish The Dish Setup menu provides graphical assistance for dish positioning. This menu can be set to two modes: User Mode (default) or Installer Mode. The User mode allows you to ...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 4-27 Setting Up the Satellite Dish, Continued 4. Press the yellow button to switch between User and Installer modes. The Installer mode is for Installers only. 5. The following table describes each of the available options for t...

4-30 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C Adjusting the Satellite Position in Installer Mode Note: To adjust the satellite position, the DiSEqC must be set to Enable. 1. On the Dish Setup screen, press the yellow button ( Installer ) to select Installer mode. 2. En...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 4-31 Setting Up the Satellite Dish, Continued Adjusting the Satellite position using Signal Tones Dish alignment can be done using the audible signal adjustment tone. The characteristics of the signal tone are shown in the table...

4-32 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C Setting Up the Satellite Dish, Continued Signal Lock The Signal Lock status is continuously updated to indicate whether the receiver is synchronized with the received satellite RF signal. Signal Lock status is displayed on ...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 4-33 Setting up the Video Setting up the Video The video format is set to the standard format for your country. If you attempt to change the format of the source video signal, a warning message appears, to inform you that if the...

4-34 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C SD Video Output Auto Receiver automatically detects correct SD video format. Depends on TV modulator installed PAL-B/G, PAL-D, PAL-I For 625-line systems. PAL-M 525-line format for Brazil. PAL-N (AR) 625-line format for Arg...

4-38 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C Setting up the Video, Continued Video Output Restrictions The following table describes the nature of the Video Outputs given the source video stream and selections that can be made by the user. The D9865 does not provide v...

4-40 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C Setting up Subtitles Setting up Subtitles The Subtitle Setup screen allows you to configure the type of subtitling (i.e., DVB or Imitext displayed by the receiver, and how the receiver displays subtitling on TV. Proceed as ...

4-42 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C Setting up Audio Setting up the Audio Proceed as follows to select the audio source. 1. From the Setup Menu screen, select Audio Setup and click OK . 2. The following table describes each of the options: Selection Options D...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 4-43 Setting up Audio, Continued Digital Audio Preference Settings The following table displays the effects of Dolby Audio Preference setting on audio outputs, based on the type of audio being decoded: Input/ Output Digital Audi...

4-44 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C Advanced Setup To View the Advanced Setup Menu Proceed as follows to view the Advanced Setup screen. From the Setup Menu screen, select Advanced Setup and press OK . The function for the available sub-menus is as follows:• ...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 4-45 Setting up Advanced User Settings To Set Up the Advanced User Settings Proceed as follows to set up the advanced user settings: 1. From the Advanced Setup screen, select Administration and press OK . 2. The following table ...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 4-47 Setting up Advanced User Settings, Continued Changing the Lock Level Receiver lock levels are password-protected. When an attempt is made to change the lock level setting, a password prompt is displayed. After the correct p...

4-48 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C Changing the Lock Level Password The Advanced Administration sub-menu allows you to change the following:• Set Lock Level Password - to change the current lock level password (1234).• Factory Reset - to restore the receiver...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 4-49 Changing the Lock Level Password, Continued Performing a Factory Reset The Factory Reset ( F/R ) is used for restoring the receiver’s factory presets (defaults). When activated, the current receiver settings are replaced by...

4-50 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C Setting up POV Mode To Set Up the POV Mode Proceed as follows to configure the POV Mode: Note: Ensure the POV Mode setting is set to Advanced. 1. From the Administration screen, press the blue button ( POVAdv ). 2. Select t...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 4-51 Setting up POV Mode, Continued 5. The Service List Mode indicates which tables are used to obtain tuning and channel lists. This only applies when Acquisition Mode is set to Custom. Select Rigorous if all default settings m...

4-52 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C Network Setup To View the Network Setup Menu Proceed as follows to view the Network Setup screen (D9865D only). From the Advanced Setup menu, select Network Setup and press OK . The function for the available sub-menus is a...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 4-53 Configuring IP Setup Setting up the IP Information The IP Setup screen allows you to set the parameters for communicating with other equipment via the Ethernet Data and Management ports for MPE applications. The D9865 suppo...

4-54 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C Configuring IP Setup, Continued Setting the Filter Mode The filter mode sets the multicast forwarding for MPE data output. Proceed as follows to set up the filter mode: 1. From the Advanced Setup screen, select IP Setup and...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 4-55 Configuring IP Setup, Continued Editing an IP Address Proceed as follows to edit the Network IP Address: 1. From the IP Setup screen, press the yellow button ( SetIPAddr ). 2. The following table describes each of the optio...

4-56 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C Setting the Unicast IP Address Viewing the Unicast IP Unicast transmission is used to send messages to a specific address. You can specify up to six single network destinations. The Gateway address is necessary if the netwo...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 4-57 Setting the Unicast IP Address, Continued 2. The following table describes each of the options: The Network Address, Mask, and Gateway Address should be changed together, as a group. The following table shows the most commo...

4-58 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C Setting the Multicast IP Address Viewing the Multicast IP Addresses Proceed as follows to view the Multicast IP addresses: 1. From the Network Setup screen, select Multicast IP Setup and click OK . The Multicast IP Setup sc...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 4-59 Setting the Multicast IP Address, Continued Editing a Multicast IP Address 1. In the Multicast IP Setup screen, scroll to the multicast IP you want to edit using the  buttons. 2. Press OK . The Edit/Delete Multicast IP sc...

4-60 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C Setting up SNMP Configuring SNMP Setup Proceed as follows to configure SNMP: 1. From the Network Setup screen, select SNMP Setup and press OK . 2. Set the Read/Write Community String to public or a custom string. The SNMP C...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 4-61 Setting up Trap Destinations Viewing Trap Destinations Note: You can assign up to 10 entries to the Trap Destination and Community String fields.Proceed as follows to view trap destinations: From the SNMP Setup screen, pres...

4-62 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C Setting up Trap Destinations, Continued Adding Trap Destinations Proceed as follows to add trap destinations: 1. From the Trap Destination Setup screen, press the green button ( Add ) to add a trap destination address. 2. T...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 4-63 Configuring Noise Cutoffs Setting the Noise Cutoff parameters The Noise Cutoffs screen allows you to set the muting thresholds for both audio and video in the event of a noisy signal. Proceed as follows to configure the noi...

4-66 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C Configuring Noise Cutoffs, Continued Audio Default C/N Margin Relationship 4. If you want to restore the transport stream and audio C/N margin options to their factory set (default) values, press the blue button ( Default )...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 4-67 Setting up Alarms and Warnings To Set Up Alarms and Warnings Proceed as follows to set up the alarms and warnings: 1. From the Advanced Setup screen, select Alarms & Warnings and press OK . 2. Set whether alarms and war...

4-68 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C To configure the Warning settings 1. From the Alarms & Warnings screen, press the blue button ( Warning ) on the remote control. 2. Set the following warning options: Send Trap (D9865D only) When set to Yes , the SNMP t...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 4-69 Viewing Downloads Performing Over-the-Air Downloads Over-the-air downloads are controlled by the uplink. This feature is set to Always so that the uplink performs downloads to the receiver when necessary. Use this feature i...

4-70 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C Setting Bootable Application Selection To View Application Version numbers Proceed as follows to view the application version numbers: From the Download screen, press the yellow button ( Boot App ). The Current App Version ...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 4-71 System Information To View the System Information Proceed as follows to view the System Information screen. From the Setup Menu screen, select Info and press OK . The function for the available sub-menus is as follows:• Ver...

4-72 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C Viewing the Version Information To View the Version Information Proceed as follows to view the version information. From the Info screen, select Version Information and press OK . The following table displays the version in...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 4-73 Viewing Hardware Information To View the Hardware Information Proceed as follows to view the hardware information. From the Info screen, select Hardware Information and press OK . The following table displays the hardware i...

4-74 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C Viewing Installed Options To view the Installed Options Proceed as follows to view the installed hardware options: From the Hardware Information screen, press the yellow button ( Inst Opt ). The Installed Options screen dis...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 4-75 Viewing Service Information To View the Service Information Proceed as follows to view the service information. From the Info screen, select Service Information and press OK . The Service Information screen displays the PID...

4-76 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C Viewing Channel Information To View the Channel Information Proceed as follows to view the Channel Information screen: From the Info screen, select Channel Information and press OK . The Channel Information screen displays ...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 4-77 Viewing DVB-CI Information The Common Interface (CI) slot is located behind the door on the front panel. They allow use of a CAM (Conditional Access Module) Smartcard to decrypt purchased programming. Note: You must be auth...

4-78 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C S.No/System Name/System ID Displays the CA system identification number and name of the CAM. Some CAMs may support multiple CA system IDs. DVB-CI Information Description

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 4-79 Viewing Device Status Information To View the Device Status Information Proceed as follows to view the device status information: From the Info screen, select Device Status and press OK . The Device Status Information scree...

4-80 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C Viewing the Active Alarm and Warning Messages To View the Active Alarm Messages Proceed as follows to view the active alarms: From the Info screen, select Active Alarm and press OK . The Active Alarm screen displays all the...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 4-81 Viewing the Active Alarm and Warning Messages, Continued To View the Active Warning Messages Proceed as follows to view the active warnings: From the Info screen, select Active Warning and press OK . The Active Warning scre...

4-82 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C Viewing the RF Status To View the RF Status Information Proceed as follows to view the RF status: From the Info screen, select RF Status and press OK . The following table describes the RF Status information displayed: RF S...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 4-83 Signal Level and Signal Quality The Signal Level and Signal Quality of the incoming signal are displayed both numerically and graphically using bar graphs. The Signal Level is associated with the RF input signal level. The ...

4-84 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C Viewing Advanced RF Diagnostics The Advanced RF diagnostics screen is primarily used by Cisco customer support for information purposes only, if needed. Proceed as follows to view the Advanced RF Diagnostics screen: From th...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 4-85 Viewing ADP Status To View the ADP Status Proceed as follows to view the ADP Status screen. From the Info screen, select ADP Status and press OK . The following table describes the ADP status information displayed: ADP Stat...

4-86 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C Press the blue button ( Clear ) to clear the total numbers above. To help the operator make accurate analysis of the receiver’s functionality, the ADP(ENC) and ADP(NON) numbers should be cleared. These same values are also ...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 5-3 Logging on to the Web GUI To Log on to the Web GUI Proceed as follows to log on to the Web GUI: 1. Open MS Internet Explorer. 2. Type the IP address of the D9865 Satellite Receiver in the address bar and press Enter. 3. Type...

5-4 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C Web GUI - Summary Screen To get an Overview of the Main D9865 Settings Proceed as follows to get an overview of the main D9865 Satellite Receiver settings: 1. Log on to the Web GUI. 2. Click Summary > Summary Dashboard . ...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 5-5 Web GUI - Summary Screen, Continued You can also customize the Dashboard by clicking on Add/Remove Module . The Dashboard Configuration window is displayed. The following table describes the all the available modules: Module...

5-6 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C Links Linked Pages The GUI of the D9865 has a number of linked pages. The function for the linked pages is as follows:• Summary From this page you can obtain an overview of the D9865 operation. • Input From this page you can...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 5-7 D9865 Web GUI Environment Web GUI Environment The following is an example of a D9865 Web GUI page. The Window Buttons The GUI of the D9865 has the following general buttons: Indicates a mandatory field. Icons Buttons Links D...

5-8 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C D9865 Web GUI Environment, Continued The About Window The top right hand corner of the D9865 web GUI has an About link. Click to open the About window. The About window displays the current D9865 system version information a...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 5-9 Tuning Setup To Set up Tuning Information Proceed as follows to configure the Tuning Setup page: 1. From the user interface of the D9865, click Input > Satellite > Tuning Setup . The Tuning Setup page is displayed. 2. ...

5-10 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C Configuring Tuning Setup, Continued 5. Set the input signal spectrum inversion setting ( I/Q ), which allows the operator to track and selected inverted or non-inverted digital signals.When set to Auto, received digital sig...

5-12 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C Setting Up Dish Pointing To Set Up Dish Pointing The Dish Pointing page allows you to configure the satellite dish position. There are two modes: User Action (default) or Installer Action. The User Action mode allows you to...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 5-13 Setting Up Dish Pointing, Continued 4. The Dish Status section displays the current satellite dish information. The following table describes the satellite dish information displayed: 5. Click Apply . Parameter Description ...

5-14 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C Setting Up Dish Pointing, Continued Proceed as follows to set up the dish in Installer Action mode: 1. From the Dish Pointing page, click on the Installer Action link at the bottom right hand corner of the page. 2. Enter th...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 5-15 4. Enable or disable the Digital Satellite Equipment Satellite Control ( DiSEqC ). Note: This must be enabled to control the DiSEqC switch. LNB Power must be on to use this setting. Refer to http://www.eutelsat.com/satellit...

5-16 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C Setting up SI Receive Parameters To Set up the SI Receive Parameters Proceed as follows to setup the SI Receive parameters: 1. From the user interface of the D9865, click Input > Satellite , expand Tuning Setup and then ...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 5-17 Setting up SI Receive Parameters, Continued 4. The Service List Mode determines which tables to use to obtain tuning and channel lists.Select Rigorous if all the default settings must be present in the received signal.Selec...

5-18 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C Setting up Muting Threshold Controls To Set Up the Muting Threshold Controls Proceed as follows to set up the muting threshold controls: 1. From the user interface of the D9865, click Input > Satellite , expand Tuning Se...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 5-19 Setting up Muting Threshold Controls, Continued The Transport Restore is the upper limit for the transport C/N margin setting. The transport will be un-muted (e.g., restored) when the C/N margin rises above the Transport Re...

5-20 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C Setting up Muting Threshold Controls, Continued Audio Default C/N Margin Relationship 5. Click Apply . If you want to restore the transport stream and audio C/N margin options to their factory set (default) values, click Re...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 5-21 Setting up the Tuning Presets/LNB To Set Up the Tuning Presets The Tuning Presets page allows you to select or configure up to 64 network presets. Your receiver may be shipped pre-configured with a number of network presets...

5-22 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C Setting up the Tuning Presets/LNB, Continued 8. Type the Symbol Rate . The symbol rate must match that of transmitted signal. You can enter a value in the range from 1.0 to 45.0 MS/s for DVB-S or 1.0 to 31.0 MS/s for DVB-S2...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 5-23 Setting up LNB Presets To Set Up the LNB Presets Proceed as follows to set up the Dish Presets: 1. From the user interface of the D9865, click Input > Satellite , expand Tuning Presets and then click LNB Presets . The LN...

5-24 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C Setting up Dish Presets, Continued 5. Set the Local Oscillator Frequency #1 ( LO Freq 1 ), which sets the satellite antenna LNB local oscillator #1 frequency. For C-Band application, set to 5.15 GHz. For Ku-band single LNB,...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 5-25 Viewing Input Status To View the Input Status Proceed as follows to view the Input Status page: From the user interface of the D9865, click Input > Satellite > Input Status . The Input Status page is displayed. The In...

5-26 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C Setting the Channel Information To set the Channel Selection Proceed as follows to select a channel and view the channel information: 1. From the user interface of the D9865, click Input > Channel . The Channel Selection...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 5-27 5. The PID Information section displays the PIDs associated with a selected channel. Authorized Indicates whether the receiver is authorized to receive the signal. Scrambled Indicates whether the received signal is scramble...

5-28 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C Configuring the Common Interface (CI) Information To Configure the Common Interface (CI) The Common Interface (CI) slot is located behind the door on the front panel. They allow use of a CAM (Conditional Access Module) Smar...

5-32 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C Viewing the PSI Tables To View the PSI Tables Proceed as follows to view the PSI tables: From the user interface of the D9865, click Input > Stream Details > PSI Tables . The PSI Tables page is displayed. The PSI Tabl...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 5-33 Viewing PSI Frequency Information To View the PSI Frequency Information Proceed as follows to view the PSI Frequency table: From the user interface of the D9865, click Input > Stream Details > PSI Frequency . The PSI ...

5-34 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C Viewing the PSI Channels To View the PSI Channels Proceed as follows to view the PSI Channels table: From the user interface of the D9865, click Input > Stream Details > PSI Channel . The PSI Channel page is displayed...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 5-35 Setting up the Video To Set Up the Video Proceed as follows to set up the video information: 1. From the user interface of the D9865, click Audio & Video > Video Setup . The Video Setup page is displayed. 2. Select H...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 5-37 Configuring Captions To Set Up the Caption Parameters Proceed as follows to set up the caption parameters: 1. From the user interface of the D9865, click Audio & Video , expand Video Setup and then click Captions . The ...

5-38 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C Setting up Subtitles To Set Up Subtitles Proceed as follows to set up the subtitles: 1. From the user interface of the D9865, click Audio & Video , expand Video Setup and then click Subtitles . The Subtitles page is dis...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 5-41 Setting up Audio To Set Up the Audio Proceed as follows to set up the audio: 1. From the user interface of the D9865, click Audio & Video > Audio Setup/ Status . The Audio Setup/Status page is displayed. Set the comp...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 5-43 Viewing System Information To View the System Identification Information Proceed as follows to view the Identification page: 1. From the user interface of the D9865, click System Settings > System > Identification . T...

5-44 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C Viewing Features/Licenses To View the Features or License Information Proceed as follows to view the features or license information: From the user interface of the D9865, click System Settings > System , expand Identifi...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 5-45 Setting Up IP Information To Configure Management and Data Port Settings Proceed as follows to configure management and data port settings: 1. From the user interface of the D9865, click System Settings > System > IP ...

5-46 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C Setting Up IP Routing To Set Up IP Routing Proceed as follows to configure the IP Routing settings: 1. From the user interface of the D9865, click System Settings > System , expand IP Settings and then click IP Routing ....

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 5-47 Setting Up IP Routing, Continued 4. The Static Unicast Routing displays the static unicast routing addresses for the MPE data. To add a new address, click Add . The following is displayed: • Set the Destination IP Address f...

5-48 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C Setting Up SNMP and Trap Destinations To Set Up SNMP Proceed as follows to configure the SNMP settings: 1. From the user interface of the D9865, click System Settings > System , expand IP Settings and then click SNMP . T...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 5-49 Setting up SNMP and Trap Destinations, Continued To Add a Trap Destination: • Click Add in the Trap Destination Configuration section. • In the Trap Destination IP Address field, enter the destination for SNMP trap messages...

5-50 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C Configuring Time/Clock Information To Configure the Time/Clock Settings Proceed as follows to configure the time/clock settings of the D9865 satellite receiver: 1. From the user interface of the D9865, click System Settings...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 5-51 Configuring Favorites and Reminders To Configure Favorites and Reminders Proceed as follows to configure the favorites and reminder settings of the D9865 receiver: 1. From the user interface of the D9865, click System Setti...

5-52 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C Configuring Favorites and Reminders, Continued Select a channel to each color as a shortcut for a quick channel change. For example, if you assign the red button to channel 1, pressing the red button while watching a differ...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 5-53 Viewing the Alarm/Warning Status To View the Active Alarm/Warning Status Information Proceed as follows to view the active alarm and warning messages: 1. From the user interface of the D9865, click System Settings > Alar...

5-54 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C Setting Up Alarms and Warnings To Set Up Alarms Proceed as follows to set up the alarms: 1. From the user interface of the D9865, click System Settings > Alarms > Setup . The Setup - Alarm Setup page is displayed. 2. ...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 5-55 Setting Up Alarms and Warnings, Continued To Set up Warnings Proceed as follows to set up the warnings: 1. From the Setup - Alarm Setup page, click on the Warning Setup link at the bottom left hand corner of the page. The S...

5-56 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C Viewing the Alarm/Warning History To View the Alarm/Warning History Information Proceed as follows to view the Alarm/Warning History information: From the user interface of the D9865, click System Settings > Alarms > ...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 5-57 Viewing Version Information To View the Version Information Proceed as follows to view the Version information: From the user interface of the D9865, click System Settings > Versions . The Versions page is displayed. The...

5-58 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C Viewing Version Information, Continued The S/W Version drop-down list allows you to select a different application version application to load to your receiver. Click Select and Reboot to reboot the receiver and load the se...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 5-59 Setting Up Import/Export Information To Configure the Import/Export Information Proceed as follows to configure the import/export information: 1. From the user interface of the D9865, click System Settings > Settings Fil...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 5-61 Viewing the Backup/Restore History To View the backup and restore Status Information Proceed as follows to view the backup and restore Status page: From the user interface of the D9865, click System Settings > Settings F...

5-62 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C Managing D9865 Web GUI Accounts You can define up to 10 usernames/passwords for login use via Web GUI session on the D9865 Satellite Receiver. When a user tries to login, the user is required to provide a username and a pas...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 5-63 Managing D9865 Web GUI Accounts, Continued To Add a User Account Note: This feature is available to a user with Admin privileges only. Proceed as follows to manage user accounts: 1. From the user interface of the D9865, cli...

5-64 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C Managing D9865 Web GUI Accounts, Continued 7. In the Administrator Password field, enter your Administrator password used to log on to the D9865 web GUI. 8. In the Account Type drop-down list, select User, Admin, or Guest. ...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 5-65 Configuring Lock Level Settings To Configure the Lock Level settings Proceed as follows to configure the lock level settings: 1. From the user interface of the D9865, click System Settings > Security/Accounts > Lock L...

5-66 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C Configuring Lock Level Settings, Continued Changing the Lock Level Password A unique lock level password (4-digit password) protects the current receiver settings against unauthorized changes. When changing the password, re...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 5-67 Viewing Contact Information To View Cisco Contact Information Proceed as follows to view contact information: From the user interface of the D9865, click Support > Contact . The Contact Information page is displayed. The...

5-68 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C Viewing Diagnostic Logs To View the Diagnostic Log Messages Proceed as follows to view the Diagnostic Log messages page: From the user interface of the D9865, click Support > Logs > Diagnostic Logs . The Diagnostic Lo...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 5-69 Viewing the Usage Counters To View the Device Usage Counters Proceed as follows to view the usage counters: From the user interface of the D9865, click Support > Logs > Usage Counters . The Usage Counters page is disp...

5-70 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C Click Clear Reset Counter to clear the Clearable Reset Counter field and it resets the counter back to 0. Last Reset Reason Displays the reason for the last restart, i.e., power cycle or manual reset. Device Status Informat...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 5-71 Performing Service Actions To Load a Software Version Proceed as follows to load a software version: 1. From the user interface of the D9865, click Support > Service Actions . The Service Actions page is displayed. The S...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 6-1 Chapter 6 Customer Information Overview In This Chapter This chapter contains the following topics. Topic See Page Product Support 6-2 Returning Products 6-4

6-2 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C Product Support Cisco provides its customers who have purchased support agreements with telephone support from anywhere in the world. If you require technical telephone assistance or product training support, or if you have ...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 6-3 Product Support, Continued Customer Responsibility When returning equipment, the customer is solely responsible for equipment packaging and transportation costs to the factory. At the customer's request, Cisco will make reas...

6-4 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C Returning Products Introduction You must have a return material authorization (RMA) number to return a product. Contact the nearest customer service center and follow their instructions. Returning a product to Cisco for repa...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 6-5 Returning Products, Continued Packing and Shipping the Product Follow these instructions to pack the product and ship it to Cisco. 1. Are the product's original container and packing material available? • If yes , pack the p...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 7-1 Chapter 7 Service and Maintenance Overview Introduction This chapter provides additional information on the alarms and warnings of the D9865 Satellite Receiver. It also provides troubleshooting tips. In This Chapter This cha...

7-2 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C Messages General The status of the D9865 receiver and its immediate surroundings is reported to the receiver in the form of messages and alarms. You can enable or disable messages in the Alarms & Warnings advanced settin...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 7-15 TDT timeout Set tdt timed out Cause: Uplink is not sending or is sending intermittently.Remedy: Clear warning. If the problem persists, determine if uplink is sending the current SI information table. Disable the warning if...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 7-19 Troubleshooting General If you experience any problems operating your satellite receiver, the following table may help you resolve your problem. Problem Cause Remedy Blank screen (TV switched on) • Normal operation if recei...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide A-1 Appendix A Technical Specifications Overview Introduction This appendix contains the technical specifications for the D9865 Satellite Receiver. Note: The technical specifications are subject to change without prior notice. I...

A-2 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C Receiver Specifications General Tuner Parameter Specification System MPEG-2/DVB CompatibleEN300 421, EN 300468, H.264 Demodulation DVB-S QPSK, DVB-S2 QPSK and 8PSK Number of RF Inputs 1 Parameter Specification Number of RF I...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide A-3 LNB Requirements DVB-S and DVB-S2 Symbol Rate Stability 1 to 2.99 MS/s ≤ ± 0.125 MHz 3 to 5.99 MS/s ≤ ± 1.00 MHz 6 to 11.99 MS/s ≤ ± 3.00 MHz 12 to 45 MS/s ≤ ± 5.00 MHz Parameter Specification LNB Phase Noise Requirement -28...

A-4 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C DVB-S Eb/No (C/N) Ratio DVB-S Eb/No (C/N) Ratio Note: The D9865 receiver displays the C/N Ratio. C/N = Eb/No + 10 log (2 x FEC X 188/204). Convolutional FEC Rate Eb/No Ratio (dB) in Linear Channel and IF Loop configuration C...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide A-5 DVB-S2 Error Rate Performance ES/No (C/N) Ratio DVB-S2 Error Rate Performance Es/No (C/N) Ratio Note: “Typical performance” was measured with Pilots On. Pilots On is highly recommended as the performance values typically deg...

A-6 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C Video Output Analog Video Output Digital Audio/Video Output (D9865H and D9865D only) HD Analog Video Output (D9865H and D9865D only) Parameter Specification Number of channels 1 Connector Type RCA Video Compression Type MPEG...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide A-7 Audio Outputs Analog Audio Output Digital Audio S/PDIF Output VBI Parameter Specification Number of Channels 1 stereo pair/2 mono channels Connector Type RCA Output Level Unbalanced, 2 V rms ± 10% at 0 dBFS Audio Decompressi...

A-8 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C Power AC Power Connector General Mechanics Environment Parameter Specification Voltage Range 100 V to 240 V AC Line Frequency 50/60 Hz Power Consumption 35 W max. LNB Power on satellite input +13 V/+ 18 V @ 350 mA max. Param...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide B-1 Appendix B Default Settings Overview Introduction The D9865 Satellite Receiver is factory configured with default settings unless you have requested a custom factory configuration. This appendix lists the factory default set...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide B-3 Factory Default Settings, Continued Preset - Number 1 Preset - Number 2 Parameter Default Preset Number 1 Preset Name ET LNB Configuration 1 Modulation Type DVB-S Downlink 11.795 GHz Symbol Rate 20.0 MS/s NetId 7 Parameter D...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide B-7 Factory Default Settings, Continued Preset - Number 9 to 63 Preset - Number 64 Parameter Default Preset Number 9 to 63 Preset Name Network name LNB Configuration 1 Modulation Type DVB-S Downlink 12.25 GHz Symbol Rate 10.0 MS...

B-8 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C Factory Default Settings, Continued LNB Setup - Configuration 1 to 9 LNB Setup - Configuration 10 Parameter Default LNB Configuration 1 to 9 LNB Power Off LO Freq1 5.15 GHz LO Freq2 0.0 GHz Crossover 0.0 GHz LO Select Off Di...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide B-9 Factory Default Settings, Continued Video Setup Subtitle Setup Parameter Default HD Video Output Auto SD Video Output For NTSC Unit: NTSCFor PAL Unit: PAL-B TV Channel For NTSC: 3For PAL: 21 TV Aspect Ratio 4:3 Aspect Ratio ...

B-10 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C Factory Default Settings, Continued Audio Setup Administration Parameter Default Stereo/Mono Stereo DRC Mode RF mode Digital Audio Preference PCM Audio PMT Source AUD1 Parameter Default POV mode Std Lock level 0 Menu transp...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide B-11 Factory Default Settings, Continued POV Mode Advanced Administration IP Setup Unicast IP Setup By default, the Unicast routes list is empty. Multicast IP Setup By default, the Unicast routes list is empty. Parameter Default...

B-12 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C Factory Default Settings, Continued Trap Destination Setup SNMP Noise Cutoffs Download Parameter Default Trap Destination Address 19.131.244.002 Community String “public” Parameter Default Read Community String public Write...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide B-13 Factory Default Settings, Continued CI Setup (Web GUI only) Import/Export (Web GUI only) Alarms and Warnings Parameter Default Decryption Mode On CI CAM QUERY Support Disable CI CAM Auto Reset Disable CA List Management Typ...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide C-1 Appendix C Lock Levels Overview Introduction This appendix contains the lock levels for the D9865 Satellite Receiver. In This Appendix This appendix contains the following topics. Topic See Page D9865 Satellite Receiver Lock...

C-2 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C D9865 Satellite Receiver Lock Levels Four (4) lock levels ( 0 , 1 , 2 , 3 , and 4 ) are available for protecting your receiver and its settings against unauthorized use or modification (see the table below for full details)....

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide C-3 D9865 Satellite Receiver Lock Levels, Continued All Screens Channel List Parameter Lock Level IR Last Channel 2 IR FAV key 3 IR NAV key 3 IR EPG key 3 IR Setup key 3 Menu 3 Parameter Lock Level Power On/Standby 3 IR Mute via...

C-4 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C D9865 Satellite Receiver Lock Levels, Continued EPG Grid EPG Info NAVigator Info Timers Parameter Lock Level Scroll up and down 3 Scroll left and right 3 Next Day 3 Previous Day 3 Favorites 3 Timers 3 OK to select channel 2 ...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide C-5 D9865 Satellite Receiver Lock Levels, Continued Favorites Edit Favorites Timers Parameter Lock Level Delete 2 New 2 Edit (to view) 3 Edit (Save button) 2 Move 2 Select 2 Parameter Lock Level Delete 2 Edit (to view) 3 Edit (S...

C-6 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C D9865 Satellite Receiver Lock Levels, Continued One Button Channel Change (button presses) Tuning/Preset Tuning/Preset: Preset Tuning/Preset:Preset:LNB Parameter Lock Level Red 2 Green 2 Yellow 2 Blue 2 Parameter Lock Level ...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide C-9 D9865 Satellite Receiver Lock Levels, Continued Advanced Administration POV Mode IP Setup Parameter Lock Level Set Lock Level Password 0 Reboot 2 Factory Reset (F/R) 0 Rst Login 0 Parameter Lock Level CA Mode 1 Acquisition M...

C-10 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C D9865 Satellite Receiver Lock Levels, Continued Change IP Address Unicast IP Setup Multicast IP Setup SNMP Setup Parameter Lock Level IP Address 2 Gateway 2 Mask 2 Save 2 Parameter Lock Level Add (button) 0 Edit 0 Delete 0 ...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide C-11 D9865 Satellite Receiver Lock Levels, Continued Trap Destinations Noise Cutoffs Lock Level: 2 Alarms & Warnings Alarm Setup Lock Level: 2 Warning Setup Lock Level: 2 Download Parameter Lock Level Add (button) 0 Edit 0 D...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide D-1 Appendix D Compliance Applicable Notices and Disclaimer FCC Notices This equipment has been tested and found to comply with the limits for a TV Interface device and Class B digital device according to Part 15 of FCC Rules. T...

D-2 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C Applicable Notices and Disclaimer, Continued Disclaimer Cisco Systems, Inc. assumes no responsibility for errors or omissions that may appear in this guide. We reserve the right to change this guide at any time without notic...

4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide D-3 Scientific-Atlanta Europe NV Luipaardstraat 12 8500 Kortrijk Belgium D e c l a r a t i o n o f C o n f o r m i t y The Product: Satellite Receiver Model Number: D9865 Ratings: 100-240V~, 50/60Hz, 0.5Amax Has been designed an...