Cisco 2948G-L3 - Manuals - manualsarea.com

Page 2 - Using the Console and the Management Ports; Modem Support; Modem Support for Recovering a System Image

3-2 Catalyst 2948G-L3 and Catalyst 4908G-L3 Switch Router Software Feature and Configuration Guide 78-10408-03 Chapter 3 Configurations for the Layer 3 Switch Router Using the Console and the Management Ports • Entered the command line interface (CLI) configuration mode. You do this by answering no ...

Page 3 - Passwords; Configuring the Management Port

3-3 Catalyst 2948G-L3 and Catalyst 4908G-L3 Switch Router Software Feature and Configuration Guide 78-10408-03 Chapter 3 Configurations for the Layer 3 Switch Router Configuring the Management Port file transfer. The maximum file transfer speed supported is 57600 baud. This functionality primarily s...

Page 5 - Configuring the Hostname; Viewing the Contents of Bootflash Memory

3-5 Catalyst 2948G-L3 and Catalyst 4908G-L3 Switch Router Software Feature and Configuration Guide 78-10408-03 Chapter 3 Configurations for the Layer 3 Switch Router Configuring the Hostname • To see the configuration in NVRAM, enter the following command: Router# show startup-config If you made cha...

Page 6 - Deleting Files from Bootflash Memory; Backing Up a System Image to a TFTP Server

3-6 Catalyst 2948G-L3 and Catalyst 4908G-L3 Switch Router Software Feature and Configuration Guide 78-10408-03 Chapter 3 Configurations for the Layer 3 Switch Router Using the Bootflash Memory SIMM • To list the directory contents of any bootflash memory media, enter the dir [ bootflash: ] command. ...

Page 8 - Erasing Files from a Full Bootflash Memory SIMM

3-8 Catalyst 2948G-L3 and Catalyst 4908G-L3 Switch Router Software Feature and Configuration Guide 78-10408-03 Chapter 3 Configurations for the Layer 3 Switch Router Using the Bootflash Memory SIMM To copy the system image from the TFTP server to a bootflash memory SIMM, perform the following proced...

Page 10 - Recovering a System Image Using Xmodem and Ymodem

3-10 Catalyst 2948G-L3 and Catalyst 4908G-L3 Switch Router Software Feature and Configuration Guide 78-10408-03 Chapter 3 Configurations for the Layer 3 Switch Router Recovering a System Image Using Xmodem and Ymodem Recovering a System Image Using Xmodem and Ymodem If you do not have access to a ne...

Page 11 - Example of Xmodem Transfer Using the ROM Monitor Mode

3-11 Catalyst 2948G-L3 and Catalyst 4908G-L3 Switch Router Software Feature and Configuration Guide 78-10408-03 Chapter 3 Configurations for the Layer 3 Switch Router Recovering a System Image Using Xmodem and Ymodem To copy a Cisco IOS image from a computer or workstation to a router using the Xmod...

Page 13 - Updating the System Image; Downloading System Images from Cisco.com; Copying the System Image to the Layer 3 Switch Router

3-13 Catalyst 2948G-L3 and Catalyst 4908G-L3 Switch Router Software Feature and Configuration Guide 78-10408-03 Chapter 3 Configurations for the Layer 3 Switch Router Updating the System Image Updating the System Image This section provides brief instructions for updating the system image on your La...

Page 15 - Reloading the Layer 3 Switch Router

3-15 Catalyst 2948G-L3 and Catalyst 4908G-L3 Switch Router Software Feature and Configuration Guide 78-10408-03 Chapter 3 Configurations for the Layer 3 Switch Router Updating the System Image Source filename [domino/cat2948g-in-mz.120-7.W5.14.45]? domino/cat2948g-in-mz.12 0-7.W5.14.46 Destination f...