Cisco 1010 Series - Manuals

6 Regulatory Compliance and Safety Information for the Catalyst 8500 and LightStream 1010 Series 78-14229-02 Site Preparation Figure 3 shows the number of people needed to lift the system by weight. Figure 3 Safely Lifting the System Power Considerations AC and DC power supplies, and an optional red...

7 Regulatory Compliance and Safety Information for the Catalyst 8500 and LightStream 1010 Series 78-14229-02 Site Preparation Using Redundant Power If your system includes an optional redundant (second) power supply, connect each of the two powersupplies to different input power sources. Failure to ...

8 Regulatory Compliance and Safety Information for the Catalyst 8500 and LightStream 1010 Series 78-14229-02 Site Preparation Disconnecting Power Follow these guidelines when disconnecting power: • Locate the emergency power-off switch for the room before working with the system. • Turn off the powe...

9 Regulatory Compliance and Safety Information for the Catalyst 8500 and LightStream 1010 Series 78-14229-02 Regulatory Standards Compliance • Direct the flow of cooling air through the chassis • Protect the backplane from dust Disposing of the System Dispose of the system and its components (includ...

10 Regulatory Compliance and Safety Information for the Catalyst 8500 and LightStream 1010 Series 78-14229-02 Regulatory Standards Compliance Table 2 lists the NEBS and ETSI specifications that the Catalyst 8500 MSR, Catalyst 8500 CSR, and LightSteam 1010 series switches are designed to meet. FCC Pa...

12 Regulatory Compliance and Safety Information for the Catalyst 8500 and LightStream 1010 Series 78-14229-02 Regulatory Standards Compliance JATE The T1 IMA interface module meets the requirements of the Japan Approvals Institute forTelecommunications Equipment (JATE). Table 5 provides the JATE app...

13 Regulatory Compliance and Safety Information for the Catalyst 8500 and LightStream 1010 Series 78-14229-02 Regulatory Standards Compliance EMC Environmental Conditions in the European Union This equipment is intended to operate under the following environmental conditions with respect toEMC: • A ...

14 Regulatory Compliance and Safety Information for the Catalyst 8500 and LightStream 1010 Series 78-14229-02 Regulatory Standards Compliance Canada Class A Warning Warning This Class A digital apparatus complies with Canadian ICES-003.Cet appareil num è rique de la classe A est conforme á la norme ...

15 Regulatory Compliance and Safety Information for the Catalyst 8500 and LightStream 1010 Series 78-14229-02 Regulatory Standards Compliance Class A Notice for Hungary Korean Class A Warning Warning This equipment is a class A product and should be used and installed properly according to theHungar...

16 Regulatory Compliance and Safety Information for the Catalyst 8500 and LightStream 1010 Series 78-14229-02 Translated Safety Warnings Translated Safety Warnings This section includes translations in multiple languages of the warnings that may appear in theCatalyst 8500 MSR, Catalyst 8500 CSR, and...

19 Regulatory Compliance and Safety Information for the Catalyst 8500 and LightStream 1010 Series 78-14229-02 Translated Safety Warnings Backplane Voltage Warning Hazardous voltage or energy is present on the backplane when the system is operating. Use cautionwhen servicing. Waarschuwing Er is gevaa...

20 Regulatory Compliance and Safety Information for the Catalyst 8500 and LightStream 1010 Series 78-14229-02 Translated Safety Warnings Ground Conductor Warning This equipment must be grounded. Never defeat the ground conductor or operate the equipment inthe absence of a suitably installed ground c...

21 Regulatory Compliance and Safety Information for the Catalyst 8500 and LightStream 1010 Series 78-14229-02 Translated Safety Warnings Restricted Area Warning Warning This unit is intended for installation in restricted access areas. A restricted access area is whereaccess can only be gained by se...

22 Regulatory Compliance and Safety Information for the Catalyst 8500 and LightStream 1010 Series 78-14229-02 Translated Safety Warnings Qualified Personnel Warning Avvertenza Questa unità deve essere installata in un'area ad accesso limitato. Un'area ad accesso limitato èun'area accessibile solo a ...

25 Regulatory Compliance and Safety Information for the Catalyst 8500 and LightStream 1010 Series 78-14229-02 Translated Safety Warnings Disconnect Device Warning Laser Radiation Warning Warning A readily accessible two-poled disconnect device must be incorporated in the fixed wiring. Waarschuwing E...

26 Regulatory Compliance and Safety Information for the Catalyst 8500 and LightStream 1010 Series 78-14229-02 Related Documentation Related Documentation The following sections describe the documentation available for the Catalyst 8510 and theLightStream 1010 ATM switch. Typically, these documents c...

27 Regulatory Compliance and Safety Information for the Catalyst 8500 and LightStream 1010 Series 78-14229-02 Obtaining Documentation This document should be used in conjunction with the documents listed in the following sections: • Platform Documents, page 27 • Software Documents, page 27 Platform ...

28 Regulatory Compliance and Safety Information for the Catalyst 8500 and LightStream 1010 Series 78-14229-02 Obtaining Technical Assistance Documentation CD-ROM Cisco documentation and additional literature are available in a Cisco Documentation CD-ROMpackage, which may have shipped with your produ...

29 Regulatory Compliance and Safety Information for the Catalyst 8500 and LightStream 1010 Series 78-14229-02 Obtaining Technical Assistance Cisco TAC Website The Cisco TAC website ( http://www.cisco.com/tac ) provides online documents and tools for troubleshooting and resolving technical issues wit...

30 Regulatory Compliance and Safety Information for the Catalyst 8500 and LightStream 1010 Series 78-14229-02 Obtaining Additional Publications and Information Obtaining Additional Publications and Information Information about Cisco products, technologies, and network solutions is available from va...