Chauvet 360Z-LED - Manuals

Before You Begin -2- Q-W ash 360Z-LED User Manual Rev. 01g Safety Notes Please read the following notes carefully because they include important safety information about the installation, usage, and maintenance of this product. It is important to read all these notes before starting to work with thi...

Introduction Q-W ash 360Z-LED User Manual Rev. 01g -3- 2. Introduction Product Description The Q-Wash 360Z-LED is an RGBW LED moving yoke, wash fixture. It consists of a base section and a moving yoke with a pan range of up to 540º. The moving head, which has a tilt range of 270º, contains the 91 RG...

Introduction -4- Q-W ash 360Z-LED User Manual Rev. 01g Product Overview Power Input IEC Socket Power Switch Fuse holder 3-pin DMX In 3-pin DMX Out 5-pin DMX Out 5-pin DMX In Control panel

Introduction Q-W ash 360Z-LED User Manual Rev. 01g -5- Product Dimensions

Setup -6- Q-W ash 360Z-LED User Manual Rev. 01g 3. Setup AC Power The Q-Wash 360Z-LED has an auto-ranging power supply that can work with an input voltage range of 100~240 VAC, 50/60 Hz. Make sure that you are connecting this product to the proper v oltage, as per the specifications in this guide, t...

Setup Q-W ash 360Z-LED User Manual Rev. 01g -7- DMX Linking You may link the Q-Wash 360Z-LED to a DMX controller using a standard DMX serial connection. If using other DMX compatible fixtures with this product, it is possible to control them individually with a single DMX controller. If you are not ...

Setup -8- Q-W ash 360Z-LED User Manual Rev. 01g Mounting Before mounting this product, read and follow the safety recommendations indicated in the Safety Notes section (page 2 of this manual). Orientation Always mount this product in any safe position while making sure that there is adequate room ar...

Operation Q-W ash 360Z-LED User Manual Rev. 01g -9- 4. Operation Control Panel Description Button Function <MENU> Exits from the current menu or function <ENTER> Enables the currently displayed menu or sets the currently selected value in to the current function <UP> Navigates upwa...

Operation -10- Q-W ash 360Z-LED User Manual Rev. 01g Continued from previous page Master/Slave The Master/Slave mode allows a group of Q-Wash 360Z-LED fixtures (the slaves) to simultaneously duplicate the output of another Q-Wash 360Z-LED (the master), whether static mode settings or auto/custom pro...

Operation Q-W ash 360Z-LED User Manual Rev. 01g -11- Continued from previous page Dimmer Curve To select the dimmer curve, do the following: 1) Go to MENU > INTRO > DIMMER . 2) Select DIMMER0~4 . DIMMER0: The output is proportional (linear) to the Dimmer and RGBW channel values. DIMMER1~4: The...

Operation -12- Q-W ash 360Z-LED User Manual Rev. 01g Continued from previous page Move-in Black This option allows you to activ ate or deactivate the move-in black 3-seconds delay. 1) Go to MENU > SPECIAL > BLACK 2) Select YES to enable the 3 seconds delay or NO to make the blackout immediate....

Operation Q-W ash 360Z-LED User Manual Rev. 01g -13- Continued from previous page White Calibration You may calibrate the white color shown when the RGB faders are at “255” and the MENU > SPECIAL > COLOR setting is RGBTOW . 1) Go to MENU > EXTRA . 2) Press <ENTER> ( PASSWORD ) will sh...

Operation -14- Q-W ash 360Z-LED User Manual Rev. 01g Menu Map 1 st Level 2 nd Level 3 rd Level Description INTRO ADDRESS 001~512 Selects a starting DMX address RESET NO/YES Resets the fixture’s custom settings FAN HIGH Select the fan’s operation mode. NOTE: The fan will go to High mode if the fixtur...

Operation Q-W ash 360Z-LED User Manual Rev. 01g -15- Continued from previous page 1 st Level 2 nd Level 3 rd Level Description EDIT (Cont.) DIMMER 000~255 Selects the dimmer value STROBE Selects the strobe frequency and mode ZOOM Select the zoom position DIMSPEED Selects the dimmer speed TIME Select...

Operation -16- Q-W ash 360Z-LED User Manual Rev. 01g DMX Values BASIC Channel Function Value Percent/Setting 1 Pan 000 ó 255 0~540º 2 Tilt 000 ó 255 0~270º 3 Red 000 ó 255 0~100% 4 Green 000 ó 255 0~100% 5 Blue 000 ó 255 0~100% 6 White 000 ó 255 0~100% 7 Power and Color Macro 000 ó 005 006 ó 010 011...

Operation Q-W ash 360Z-LED User Manual Rev. 01g -17- ADVANCED Channel Function Value Percent/Setting 1 Pan 000 ó 255 0~540º 2 Pan Fine 000 ó 255 Fine movement control 3 Tilt 000 ó 255 0~270º 4 Tilt Fine 000 ó 255 Fine movement control 5 Pan/Tilt Speed 000 ó 255 Fast~Slow 6 Red 000 ó 255 0~100% 7 Gre...

Technical Information -18- Q-W ash 360Z-LED User Manual Rev. 01g 5. Technical Information Fixture Maintenance To maintain optimum performance and minimize wear, the user should clean this product frequently. Usage and env ironment are contributing factors in determining the cleaning frequency. As a ...

Technical Information Q-W ash 360Z-LED User Manual Rev. 01g -19- Troubleshooting Guide Symptom Cause(s) Action(s) Fixture is on LEDs are off Fixture defaulted Configure fixture’s parameters Faulty LED board Send unit for repair Faulty LED Driver board Faulty LED Control board Faulty Display board Fi...

Technical Information -20- Q-W ash 360Z-LED User Manual Rev. 01g Returns Procedure The user must send the merchandise prepaid, in the original box, and with its original packing and accessories. CHAUVET® will not issue call tags. Call CHAUVET® and request a Return Merchandise Authorization (RMA) num...