Carson SA-430-17 - Manuals - manualsarea.com

Page 2 - SA-430-17 Installation and Operating Instructions; TABLE OF CONTENTS

Page 2 of 15 SA-430-17 Installation and Operating Instructions CP5010A 08/05/08 TABLE OF CONTENTS TABLE OF CONTENTS ............................................................................................................. 2 SPECIFICATIONS ............................................................

Page 4 - GENERAL DESCRIPTION; lead wire with common ground.

Page 4 of 15 SA-430-17 Installation and Operating Instructions CP5010A 08/05/08 GENERAL DESCRIPTION The SA-430 Remote Siren Amplifier with Mechanical Tone is a premium unit designed for single or dual 100W speaker use. The control head is only 1 inch deep and can be installed in minimum clearance ar...

Page 5 - INSTALLATION; Sound

SA-430-17 Installation and Operating Instructions Page 5 of 15 08/05/08 CP5010A INSTALLATION Proper installation of the unit is essential for years of safe, reliable operation. Please read all instruction before installing the unit. Failure to follow these instructions can cause serious damage to th...

Page 9 - ELECTRICAL CONNECTIONS CONTINUED

SA-430-17 Installation and Operating Instructions Page 9 of 15 08/05/08 CP5010A ELECTRICAL CONNECTIONS CONTINUED Plug into unit first for terminal identification Plug secured with mounting screws 10-P Terminal Block Plug (CP4833-10) Plug installed this orientation + - #16 AWG BRN (2 LEADS) + - BAT #...

Page 10 - OPERATION

Page 10 of 15 SA-430-17 Installation and Operating Instructions CP5010A 08/05/08 OPERATION Sound Hazard - Sound level from siren speaker (>120dBA @ 10 feet) may cause hearing damage. Do not operate siren without adequate hearing protection for you and anyone in immediate vicinity. (Ref. OSHA 1910...

Page 11 - SIREN

SA-430-17 Installation and Operating Instructions Page 11 of 15 08/05/08 CP5010A SIREN SWITCH This momentary push-button switch provides Horn or Manual tone control. It can optionally control Horn Ring Cycler 2 operation in the Standby position if the HRC2 option is selected. SIREN Horn - A simulate...

Page 12 - SERVICE; PROBLEMS; Symptom Possible; Input voltage must be greater than lowest rated voltage.; See

Page 12 of 15 SA-430-17 Installation and Operating Instructions CP5010A 08/05/08 SERVICE This unit is designed to provide years of reliable service under even the worst conditions. Many times there may appear to be a problem with the unit when the true problem is in the speaker(s) or improper instal...

Page 14 - RETURN; phone. We can also be reached via e-mail at; LIMITED WARRANTY; from the date of delivery to the first user-purchaser.

Page 14 of 15 SA-430-17 Installation and Operating Instructions CP5010A 08/05/08 RETURN If you have any questions concerning this or any other Carson product, please contact our Technical Service Department at (888) 577-6877. Many issues can be handled over the phone. We can also be reached via e-ma...

Page 15 - CONTROL HEAD INSTALLATION TEMPLATE; This inner area

SA-430-17 Installation and Operating Instructions Page 15 of 15 08/05/08 CP5010A CONTROL HEAD INSTALLATION TEMPLATE 1/2” 2-5/8” 1/8” 5-1/4” 5-7/8” 6-1/4” 2-7/8” 2-1/2” This inner area to be removed. CAUTION: Please note that top and bottom edges only provide 1/8” overlap. Cut carefully.