Carson SA-430-83F - Manual
Carson SA-430-83F – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – NOTICE
- Page 3 – emergency equipment.; Control Head – Rear View
- Page 4 – CONTROL HEAD ELECTRICAL CONNECTIONS; - Connect to same ground or negative supply as amplifier.; HORN RING
- Page 5 – Wire Size and Termination; power relay may be used.; AMPLIFIER POWER; CONTROL HEAD
- Page 6 – OPERATION; Sound; OVERRIDE FUNCTIONS
- Page 8 – PARTS; Control Head; Amplifier; Item Part
- Page 9 – CONTROL HEAD INSTALLATION TEMPLATE; This inner area; Please note that top and bottom edges only
TB0334B
Page 1 of 9
10/18/03
Carson Manufacturing Co., Inc.
5451 North Rural Street
Indianapolis, IN 46220
Phone: (888) 577-6877 Fax: (317) 254-2667
www.carsonsirens.com
TECHNICAL BULLETIN
RADIO
HORN
MAN
WAIL
YELP
PHASER
SIREN
PA
VOL
SA 430
POWER
ON
INSTALLATION AND
OPERATING MANUAL
SA-430-83F (FLUSH MOUNT CONTROL HEAD)
SA-430-83FX (FLUSH MOUNT WITH EXTENDED MIC)
Carson is a trademark of Carson Manufacturing Company, Inc.
Sound
Hazard
- Sound level from siren speaker (>120dBA @ 10 feet) may cause hearing damage.
Do not operate siren without adequate hearing protection for you and anyone in immediate vicinity.
(Ref. OSHA 1910.95 for occupational noise exposure guidelines)
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
TB0334B Page 2 of 9 10/18/03 SA-430-83 SPECIFICATIONS INPUT POWER: 11-16 Volts DC, 8 Amps DC per 100W Speaker Power off current to amplifier is 1mA Max. SIREN MODE OUTPUT POWER: 15 VDC input, 100W speaker(s) One speaker - 105 Watts RMS Two speakers - 180 Watts RMS AUDIO MODE OUTPUT POWER: 14 VDC inp...
TB0334B Page 3 of 9 10/18/03 INSTALLATION Proper installation of the unit is essential for years of safe, reliable operation. Please read all instruction before installing the unit. Failure to follow these instructions can cause serious damage to the unit or vehicle and may void warranties. SAFETY P...
TB0334B Page 4 of 9 10/18/03 CONTROL HEAD ELECTRICAL CONNECTIONS All control head leads may be extended with #22 AWG or larger lead wire. Negative Connection (Black) - Connect to same ground or negative supply as amplifier. Positive Connection (Red) - Connect to positive DC supply. It is recommended...
