Carson SA-441-83F - Manual
Carson SA-441-83F – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – NOTICE
- Page 3 – emergency equipment.; Control Head – Rear View
- Page 4 – CONTROL HEAD ELECTRICAL CONNECTIONS; - Connect to same ground or negative supply as amplifier.; HORN RING
- Page 5 – Wire Size and Termination; power relay may be used.; AMPLIFIER POWER; CONTROL HEAD
- Page 6 – NORMAL OPERATION (Dual Mode Switch Off); Sound; HORN OVERRIDE
- Page 7 – DUAL MODE OPERATION (Dual Mode Switch On); The Rotary Function Switch selects the following modes:; Same as normal mode, both speakers produce same Horn tone.; PHASER OVERRIDE
- Page 9 – PARTS; Control Head; Amplifier; Item Part
- Page 10 – CONTROL HEAD INSTALLATION TEMPLATE; This inner area; Please note that top and bottom edges only
TB0335B
Page 1 of 10
10/18/03
Carson Manufacturing Co., Inc.
5451 North Rural Street
Indianapolis, IN 46220
Phone: (888) 577-6877 Fax: (317) 254-2667
www.carsonsirens.com
TECHNICAL BULLETIN
SA 441
RADIO
HRN/TT
MAN
WAIL
YELP
PHASR/W-Y
SIREN
PA
VOL
POWER
OFF/ON
ON
INSTALLATION AND
OPERATING MANUAL
SA-441-83F (FLUSH MOUNT CONTROL HEAD)
SA-441-83FX (FLUSH MOUNT WITH EXTENDED MIC)
Carson is a trademark of Carson Manufacturing Company, Inc.
Sound
Hazard
- Sound level from siren speaker (>120dBA @ 10 feet) may cause hearing damage.
Do not operate siren without adequate hearing protection for you and anyone in immediate vicinity.
(Ref. OSHA 1910.95 for occupational noise exposure guidelines)
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
TB0335B Page 2 of 10 10/18/03 SA-441-83 SPECIFICATIONS INPUT POWER: 11-16 Volts DC, 8 Amps DC per 100W Speaker Power off current to amplifier is 1mA Max. SIREN MODE OUTPUT POWER: 15 VDC input, 100W speakers Two outputs - 105 Watts RMS per output AUDIO MODE OUTPUT POWER: 14 VDC input, 100W speakers T...
TB0335B Page 3 of 10 10/18/03 INSTALLATION Proper installation of the unit is essential for years of safe, reliable operation. Please read all instruction before installing the unit. Failure to follow these instructions can cause serious damage to the unit or vehicle and may void warranties. SAFETY ...
TB0335B Page 4 of 10 10/18/03 CONTROL HEAD ELECTRICAL CONNECTIONS All control head leads may be extended with #22 AWG or larger lead wire. Negative Connection (Black) - Connect to same ground or negative supply as amplifier. Positive Connection (Red) - Connect to positive DC supply. It is recommende...
