Carson HPK-100 - Manual
Carson HPK-100 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – NOTICE
- Page 3 – INSTALLATION; systems and emergency equipment.; Sound Hazard
- Page 4 – DO NOT get metal shavings inside the speaker.; provide power to both the vehicle horn and
- Page 5 – ELECTRICAL CONNECTIONS CONTINUED; UNDER HOOD
- Page 6 – ELECTRICAL CONNECTIONS CONTINUED (NOT USING SWITCH PANEL); OPERATION; USING SWITCH PANEL
- Page 7 – SERVICE; If there is not power into the
- Page 8 – or contact our Service Department at:; RETURN; LIMITED WARRANTY
Carson Manufacturing Co., Inc.
5451 North Rural Street
Indianapolis, IN 46220
Phone: (888) 577-6877 Fax: (317) 254-2667
www.carson-mfg.com
HPK-100
HORN SYSTEM
INSTALLATION AND OPERATING
INSTRUCTIONS
This product is legal in most states.
Please consult your state/local vehicle codes to ensure compliance with vehicle horn regulations.
Carson is a trademark of Carson Manufacturing Company, Inc.
NE
G
SP
K
SP
K
PO
S
Sound Hazard
- Sound level from horn speaker (>120dBA @ 10 feet) may cause hearing damage.
Do not operate horn without adequate hearing protection for you and anyone in immediate vicinity.
(Ref. OSHA 1910.95 for occupational noise exposure guidelines)
CSP-100B
100W 11 OHM
HORN SELECT
LITE
O
F
F
O
N
V
E
H
A
I
R
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Page 2 of 8 HPK-100 Installation and Operating Instructions 02/04/10 CP5060A GENERAL DESCRIPTION The HPK-100 is a complete electronic simulated air-horn system. The system includes an ampli-fier with matching speaker along with a switch panel. The switch panel allows changing between the vehicle hor...
HPK-100 Installation and Operating Instructions Page 3 of 8 CP5060A 02/04/10 INSTALLATION Proper installation of the system is essential for years of safe, reliable operation. Please read all instruction before installing the system components. Failure to follow these instructions can cause serious ...
Page 4 of 8 HPK-100 Installation and Operating Instructions 02/04/10 CP5060A MOUNTING Amplifier Select a location for the amplifier in an area such as the driver compartment firewall, under a seat, etc. Mounting the amplifier in the engine compartment or in an area directly exposed to weather is not...
