Page 2 - IMpORTANT
2 www.bromicheating.com Head Office: 1 Suttor Street, Silverwater, Sydney, NSW 2128 Australia Telephone: 1300 276 642 (within Australia) or +61 2 9748 3900 (from overseas) Fax: +61 2 9748 4289 Email: [email protected] Web: www.bromicheating.com ! IMpORTANT This manual contains important information ...
Page 3 - CONTENTS
3 www.bromicheating.com CONTENTS IMPORTANT NOTES & WARNINGS 4 PRODUCT OVERVIEW 5 PRODUCT DESCRIPTION 5 SPECIFICATIONS 5 GENERAL INFORMATION 6 PRODUCT FEATURES 6 INSTALLATION REQUIREMENTS 6 GAS REQUIREMENTS 6 INSTALLATION CLEARANCES 7 INSTALLATION INSTRUCTIONS 8 HEATER INSTALLATION INSTRUCTIONS 8...
Page 4 - IMpORTANT NOTES AND WARNINGS; WarnInG
4 www.bromicheating.com IMpORTANT NOTES AND WARNINGS WarnInG • THIS APPLIANCE SHALL NOT BE INSTALLED OR USED IN RESIDENTIAL DOMESTIC INDOOR AREAS • CHILDREN AND ADULTS SHOULD BE ALERTED TO THE HAZARDS OF HIGH SURFACE TEMPERATURES AND SHOULD STAY AWAY TO AVOID BURNS OR CLOTHING IGNITION • YOUNG CHILD...
Page 5 - pRODUCT OvERvIEW; Product descrIPtIon
5 www.bromicheating.com pRODUCT OvERvIEW Product descrIPtIon The Tungsten Smart-Heat Gas Radiant Heaters are designed to provide effective outdoor heating to both commercial and residential premises whilst offering an appealing design. The heaters incorporate full function electronic controls, allow...
Page 6 - General InFormatIon; INSTALLATION REQUIREMENTS; ImPortant
6 www.bromicheating.com pRODUCT OvERvIEW CONTINUED... General InFormatIon The Tungsten Series Gas radiant heaters are suitable for outdoor spaces. In addition to the installation instructions provided, authorized installers must abide by local codes, or in the absence of local codes, with the Nation...
Page 7 - InstallatIon clearances; Minimum height to combustible materials
7 www.bromicheating.com INSTALLATION REQUIREMENTS CONTINUED... C M inimum M oun ting H eigh t t o G round B A InstallatIon clearances When selecting the installation location for the Tungsten Series Heaters, the following mounting clearances should be followed. Care should be taken to ensure that th...
Page 8 - INSTALLATION INSTRUCTIONS; Heater InstallatIon InstructIons; WARNING
8 www.bromicheating.com INSTALLATION INSTRUCTIONS Heater InstallatIon InstructIons cautIon Please see specifications for the weight of the Heater. The installer of the Tungsten Smart-Heat Radiant Heaters must comply with all relevant State Occupational Health & Safety Regulations. ! Step 1. Moun...
Page 10 - For Honeywell Control; PLEASE NOTE: THERE IS NO NEED TO
10 www.bromicheating.com INSTALLATION INSTRUCTIONS CONTINUED... 6. Insert pivot Bolt • Position Arm so that the rear hole’s on the mountingarm and Control Housing are in alignment • Insert Bolt and washer (as supplied) through ControlHousing and Mount Arm, using the hole located onthe bottom surface...
Page 13 - Heat-deFlector InstallatIon; CEILING POLE INSTALLATION
13 www.bromicheating.com Heat-deFlector InstallatIon NOTE: Tungsten Heating recommends running power and gas lines, to the heater, inside the pole to reduce visibility and likelihood of damage. INSTALLATION INSTRUCTIONS CONTINUED... 1 2 3 4 3 CEILING POLE INSTALLATION ! WARNING When mounting ceiling...
Page 14 - OpERATING INSTRUCTIONS; MAINTENANCE AND SERvICING
14 www.bromicheating.com OpERATING INSTRUCTIONS turnInG tHe aPPlIance on 1. Ensure that gas installation and power installation has been carried out in accordance with the manufacturers instructions outlined in this document. 2. Turn on gas supply. 3. Ensure correct gas supply pressures are set. 4. ...
Page 15 - OpERATION DATA - HONEYWELL CONTROL BOX; OpTIMUM MOUNTING DISTANCE
15 www.bromicheating.com ImPortant Do not apply any additional surface coating to the heater under any circumstances. Use of additional coating other than those applied during manufacture could result in hazardous reactions such as toxic fumes or fires. Additional coatings will void the warranty. ! ...
Page 17 - OpERATION DATA - FENWAL CONTROL BOX
17 www.bromicheating.com OpERATION DATA - FENWAL CONTROL BOX The Series 35-60 is 24 VAC Microprocessor Based Direct Spark Ignition Controls designed for use in all types of heating applications. The control utilizes a microprocessor to continually and safely monitor, analyze and control the proper o...
Page 18 - OpERATION DATA - DUNGS GAS vALvE; OpERATION DATA - WHITE RODGERS vALvE
18 www.bromicheating.com The Dungs GB Valve is a multifunctional Gas Control with combined regulator and safety shutoff valves. The pressure regulator includes a servo regulator to regulate pressure fluctuations in the mains supply. This ensures a precise volume flow and constant injector pressure. ...
Page 19 - WIRING DIAGRAM - HONEYWELL CONTROL, HONEYWELL GAS vALvE; HONEY WELL; ELECTRICAL DIAGRAM; SEE INSTRUCTION MANUAL FOR DETAILS ON HOW
19 www.bromicheating.com WIRING DIAGRAM - HONEYWELL CONTROL, HONEYWELL GAS vALvE 12 11 10 9 8 7 6 5 4 3 2 1 N L E White Black 110 V N/A Yellow/Green Yell o w/ G reen Yell o w/ G reen G reen White Black Ignition + Ionisation HONEY WELL Red 230 V Blue Pu rple Pu rple Note: If any of the original wire ...
Page 20 - FENW; WIRING DIAGRAM - FENWAL CONTROL, WHITE RODGERS GAS vALvE
20 www.bromicheating.com N L E White Black - 110 V Blue Green Black HT Cable Blue Ignition + ionisation FENW AL 24 V ELECTRICAL DIAGRAM SEE INSTRUCTION MANUAL FOR DETAILS ON HOW TO CONNECT THE ELECTRICAL COMPONENTS. GND. V 2 White S 1. T H V 1 Red Orange Yellow/Green TR ANSFORMER WHITE R ODGERS Note...
Page 21 - DUNGS; WIRING DIAGRAM - FENWAL CONTROL, DUNGS GAS vALvE
21 www.bromicheating.com N L E White Black - 110 V Blue Green Black HT Cable Blue FENW AL 24 V ELECTRICAL DIAGRAM SEE INSTRUCTION MANUAL FOR DETAILS ON HOW TO CONNECT THE ELECTRICAL COMPONENTS. GND. V 2 White S 1. T H V 1 Red Orange Yellow/Green TR ANSFORMER DUNGS Note: If any of the original wire a...
Page 22 - REpLACEMENT pARTS; White rodger
22 www.bromicheating.com REpLACEMENT pARTS 1 2 3 4 5 9 10 11 24 8 12 23 6 22 7 17 13 16 19 20 15 13 14 19 White rodger honeywell
Page 24 - pOST-INSTALLATION REpORT; FOR TUNGSTEN SMART-HEAT GAS RADIANT HEATERS
24 www.bromicheating.com pOST-INSTALLATION REpORT Customer Business name: Date: dd / mm / yyyy site address: suburb: state: Postcode: Customer Contact Details: Name: Position: Ph: ( ) Fax: ( ) mobile: Installer Contact Details: Name: Position: Ph: ( ) Fax: ( ) mobile: pOST-INSTALLATION REpORT FOR TU...
Page 25 - TROUBLESHOOTING; SYMpTOM
25 www.bromicheating.com TROUBLESHOOTING SYMpTOM pOSSIBLE CAUSE CORRECTIvE ACTION Heater will not turn on 1. No power2. No gas 1. Have authorized electrician check power supply 2. Have authorized gas fitter check gas supply Heater turns on, but then cycles on and off 1. Insufficient flame on ionisat...
Page 26 - AppENDIX A