Bromic 2620634 - Manuals

Bromic 2620634 Heater – User Manual in PDF format online.

Manuals:

User Manual

User Manual Bromic 2620634

Summary

Page 2 - IMPORTANT INSTRUCTIONS; DANGER, WARNING, IMPORTANT; Correct disposal of this product

2 bromic.com/heat ! IMPORTANT INSTRUCTIONS This manual contains important information about the installation, operation, and maintenance of Eclipse Smart-Heat TM Electric Heaters. Please pay close attention to the important safety information shown throughout this instruction manual. Any safety info...

Page 3 - CONTENT

3 bromic.com/heat CONTENT IMPORTANT NOTES & WARNINGS 4-5 PRODUCT OVERVIEW 6 PRODUCT DESCRIPTION 6 SPECIFICATIONS 6 PRODUCT FEATURES 6 KEY DIMENSIONS & CLEARANCES 7 INSTALLATION INSTRUCTIONS - CEILING MOUNTED HEATER 8-14 BOX CONTENTS 8-9 WARNING 9 INSTRUCTIONS FOR SINGLE POLE OPTIONS 10-11 IN...

Page 4 - IMPORTANT NOTES & WARNINGS; WARNING

4 bromic.com/heat IMPORTANT NOTES & WARNINGS WARNING • IMPORTANT - Installation MUST be carried out by a licensed electrical contractor. • Heater must be installed by 2 persons. • Improper installation, adjustment, or alteration and failure to follow the warnings and instructions in this manual ...

Page 5 - IMPORTANT NOTES AND WARNINGS; CONTINUED; SAVE THESE INSTRUCTIONS

5 bromic.com/heat • In case of direct connection to a supply line, a bipolar circuit breaker with contact opening distance of at least 3 mm must be fitted upstream from the supply line. Contact an authorised service technician if you are unsure if you have a circuit breaker installed on the premises...

Page 6 - SPECIFICATIONS

6 bromic.com/heat PRODUCT DESCRIPTION PRODUCT FEATURES PRODUCT SPECIFICATIONS SPECIFICATIONS Model Eclipse Smart-Heat TM Electric Part No (Heater Eclipse Pendant AU) 2620621-1 Part No (Straight Ceiling Mount Pole 203mm) 2620631 Part No (Straight Ceiling Mount Pole 610mm) 2620632 Part No (Twin Straig...

Page 7 - KEY DIMENSIONS & CLEARANCES

7 bromic.com/heat KEY DIMENSIONS & CLEARANCES The stated clearance to combustible materials represents surface temperature of 65°C above room temperature. Building material with a low heat tolerance (such as plastic, vinyl siding, canvas, tri-ply etc.) may subject to degradation at lower tempera...

Page 8 - INSTALLATION INSTRUCTIONS - CEILING MOUNTED HEATER; Box 1 Contents

8 bromic.com/heat INSTALLATION INSTRUCTIONS - CEILING MOUNTED HEATER Contents Packed in (3) Boxes Box 1 Contents Box 2 Contents Eclipse Head Assembly Including pre-assembled 2 x Dome Head Screws (M4 - Length: 6mm) Pendant Pole Assembly one of the following styles: • Twin Straight Ceiling Mount Pole ...

Page 9 - Eclipse Pendant Control; IMPORTANT; Box 3 Contents; Bolts for fastening to Ceiling surface; Caution – Glass – Handle with care

9 bromic.com/heat INSTALLATION INSTRUCTIONS - CEILING MOUNTED HEATER CONTINUED... Tools/Parts Required (not Included) Eclipse Pendant Control Remote control (with wall holder and screws) WARNING This heater MUST be installed by an licensed electrical contractor. Do no t perform maintenance, or carry...

Page 11 - All packaging materials must be removed before

11 bromic.com/heat 7. Fully insert additional 2 X Dome Head Screws (M4 - Length: 6mm) on both sides, and tighten all four screws, to lock heater in place. 5. Feed the cable through the Ceiling Mount Pole until it has passed through and out into the roof cavity. Feed through the cable slack, and with...

Page 14 - tighten all four screws, to lock heater in place.; Insert the Heater Bracket into the Twin

14 bromic.com/heat 7. Fully insert additional 2 X Dome Head Screws (M4 - Length: 6mm) on both sides, and tighten all four screws, to lock heater in place. INSTALLATION INSTRUCTIONS - CEILING MOUNTED HEATER CONTINUED... 2x M4 - Length: 6mm 6. Insert the Heater Bracket into the Twin Straight Ceiling M...

Page 15 - Installation Instructions – Wall Mounted Heater; INSTALLATION INSTRUCTIONS - WALL MOUNTED HEATER

15 bromic.com/heat Installation Instructions – Wall Mounted Heater Box 1 Contents Box 2 Contents Eclipse Head Assembly Including pre-assembled 2 x Dome Head Screws (M4 - Length: 6mm) Wall Mount Pole Instruction Manual (This Document) Wall Bracket Wall Bracket Cover INSTALLATION INSTRUCTIONS - WALL M...

Page 18 - desired location, using appropriately sized

18 bromic.com/heat Instructions for Wall Mounted option: 1. Unpack all items from shipping cartons and place items on a non-abrasive surface. 3. Slide the Wall Bracket Cover over the Wall Bracket. INSTALLATION INSTRUCTIONS - WALL MOUNTED HEATER CONTINUED... 2. Mount the Wall Bracket on the wall in t...

Page 24 - ELECTRICAL INSTALLATION – PENDANT HEATERS CONTROL; installing the Eclipse Control Box.; DANGER; per the wiring diagram. The Live, Neutral

24 bromic.com/heat ELECTRICAL INSTALLATION – PENDANT HEATERS CONTROL 1. Open cover to the Pendant Control Box, by removing 6x Oval head screws (#4-40 - Length: 1/2”) from the cover. The Power source MUST NOT be live when installing the Eclipse Control Box. DANGER IMPORTANT The controller must be ins...

Page 26 - FOR INSTALLATION USING; (Bromic Eclipse Pendant Control supplied separately); ONLY TO BE INSTALLED & SERVICED BY LICENSED & AUTHORIZED TECHNICIAN.; PENDANT HEATER CONTROL WIRING DIAGRAM

26 bromic.com/heat WHITE 2 4V DC WHITE 2 4V DC GREEN/YEL LOW GREEN/YEL LOW GREY 2 40V GREY 2 40V BLUE BLUE BLA CK 2 40V BLA CK 2 40V BROWN 24V DC BROWN 24V DC +24V DC G -24V DC L2 N L1 TRANSFORMER MEANWELL (LPF-25-24) HEATER CONTROL PCB EMI FILTER (YB22D1-3A-W) LED PCB DIMMER DC OUT 2 4V WHITE 2 4V ...

Page 28 - OPERATING INSTRUCTIONS; TURNING THE APPLIANCE ON; REMOTE CONTROL FUNCTIONS; (SUPPLIED WITH BROMIC ECLIPSE PENDANT CONTROL)

28 bromic.com/heat OPERATING INSTRUCTIONS TURNING THE APPLIANCE ON 1. Using the Remote Control, select the desired Heater setting: • Heater 100% - Heater output at full (100%). • Heater 66% - Heater output at 66% of total. • Heater 33% - Heater output at 33% of total. 2. Using the Remote Control, se...

Page 29 - REMOTE CONTROL BATTERY

29 bromic.com/heat OPERATING INSTRUCTIONS REMOTE CONTROL BATTERY • CAUTION: Do not ingest battery—Chemical burn hazard. • The remote control supplied with this product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hour...

Page 30 - PAIRING REMOTE CONTROL TO LED PCB (BOTTOM 3 BUTTONS OF REMOTE).

30 bromic.com/heat OPERATING INSTRUCTIONS WARNING: MUST ONLY BE SERVICED BY LICENSED & AUTHORIZED TECHNICIAN. 1. Open cover to the Pendant Control Box, by removing 6x Oval head screws (#4-40 - Length: 1/2”) from the cover. 2. Locate the small black button on the small LED PCB (shown in image on ...

Page 31 - MAINTENANCE & SERVICING; MAINTENANCE; DO NOT

31 bromic.com/heat MAINTENANCE & SERVICING MAINTENANCE IMPORTANT NOTES & WARNINGS WARNING This heater MUST be installed by an authorised/ licenced person. Do not perform maintenance, or carry out installation or assembly procedure while electrical power is switched on. ! IMPORTANT Check prod...

Page 32 - TROUBLESHOOTING; REPLACEMENT PARTS; SYMPTOM

32 bromic.com/heat TROUBLESHOOTING REPLACEMENT PARTS SYMPTOM POSSIBLE CAUSE (S) CORRECTIVE ACTION No heat 1. Incorrect heater setting chosen2. Incorrect Voltage.3. No power.4. No/low batteries in remote.5. Remote too far.6. Radio interference.7. Remote not paired or faulty control. 1. Choose heat se...