Bromic 2620247 - Manuals - manualsarea.com

Page 2 - IMPORTANT; DANGER, WARNING, IMPORTANT; Correct Disposal of this product

2 bromic.com/heat ! IMPORTANT This manual contains important information about the installation, operation, and maintenance of Platinum Smart-Heat™ Electric Heaters. Please pay close attention to the important safety information shown throughout this instruction manual. Any safety information will b...

Page 3 - CONTENTS

3 bromic.com/heat CONTENTS IMPORTANT NOTES & WARNINGS 4 PRODUCT OVERVIEW 5 PRODUCT DESCRIPTION 5 SPECIFICATIONS 5 PRODUCT FEATURES 5 HEATER INSTALLATION INSTRUCTIONS 6 CEILING & WALL MOUNTING 6 CEILING RECESS 9 TUBE SUSPENSION 10 ELECTRICAL INSTALLATION 11 SERVICING 11 TROUBLESHOOTING 11

Page 4 - IMPORTANT NOTES AND WARNINGS

4 bromic.com/heat IMPORTANT NOTES AND WARNINGS WARNING • IMPORTANT - Installation MUST be carried out by alicensed and authorised person. • Improper installation, adjustment, or alteration and failureto follow the warnings and instructions in this manual couldresult in severe personal injury, death ...

Page 5 - PRODUCT OVERVIEW; CONTINUED; SPECIFICATIONS

5 bromic.com/heat or swimming pool. Any switches or controls must not be within reach of a person in the bathtub, shower or swimming pool. • To maintain Ingress Protection Rating (IPX4), only IP44rated conduit fittings should be used for electricalinstallation. • This product does not have a switch ...

Page 6 - HEATING INSTALLATION INSTRUCTIONS; CEILING & WALL MOUNTING; WARNING - Outdoor Installation; MINIMUM DISTANCE BETWEEN

6 bromic.com/heat HEATING INSTALLATION INSTRUCTIONS • Heaters must be installed according to theminimum installation clearances shown in thesediagrams CEILING & WALL MOUNTING • Heaters must be away from the fourth wall. This heater MUST be permanently installed by an authorised/licenced person. ...

Page 7 - Wall mount

7 bromic.com/heat HEATING INSTALLATION INSTRUCTIONS CONTINUED... OPTION 1 To exit the cable through the side of the wall mounting bracket, start from step 1. 1. Unscrew and remove plug-in wall bracket (a) . 2. Attach extra supplied cable gland into the samehole from the outside of the bracket. Faste...

Page 8 - Straight bracket option

8 bromic.com/heat HEATING INSTALLATION INSTRUCTIONS CONTINUED... 8. To fix heater at desired angle, fully insert M3x10mm positioning screws (included with wall bracket) onboth sides of mounting bracket whilst holding heater in the desired position (h). The heater can positioned straight, or be angle...

Page 11 - TUBE SUSPENSION

11 bromic.com/heat HEATING INSTALLATION INSTRUCTIONS CONTINUED... 11. Attach the bracket end-cap to the wall bracket using the4 M5 screws and nuts provided (k). 12. Carefully remove the 4 M5 screws fastening the heatermounting bracket to the back of the heater. Be careful notto move or put any force...

Page 12 - ELECTRICAL INSTALLATION; SERVICING; TROUBLESHOOTING

12 bromic.com/heat ELECTRICAL INSTALLATION ! WARNING This heater MUST be permanently installed by an authorised/licenced person. Do not perform maintenance, or carry out installation or assembly procedure while electrical power is switched on. 1. Check product label for correct voltage and wattage t...