Bradley CRS-2/IR - Manuals - manualsarea.com

Page 2 - Express® Crescent® Lavatory System Dimensions

Express ® Crescent ® Lavatory System - CRS-Series CRS-2/IR, CRS-3/IR Installation Instructions 2 2/8/07 Bradley Corporation • 215-1330 Rev. K; EN 06-915 Express® Crescent® Lavatory System Dimensions 48" (1219) 26" (660) *34" (864) *20" (508) *37-3/8" (949) 8-1/2" (216) (mm) (...

Page 3 - Installation Instructions; Supplies required for installation:; NOTE: Refer to Figure 1 below and Figure 2 on page 4 for Express; supply lines will cause the valves to malfunction.; Figure 1; Standard Height Mounting

Express ® Crescent ® Lavatory System - CRS-Series Installation Instructions CRS-2/IR, CRS-3/IR 3 Bradley Corporation • 215-1330 Rev. K; EN 06-915 2/8/07 Installation Instructions Supplies required for installation: • (6) 3/8" wall anchors, bolts and washers to mount bowl to wall (min. pull-out f...

Page 4 - at the locations marked in Figure 2.; Figure 2

Express ® Crescent ® Lavatory System - CRS-Series CRS-2/IR, CRS-3/IR Installation Instructions 4 2/8/07 Bradley Corporation • 215-1330 Rev. K; EN 06-915 * ADJUSTMENTS TO VERTICAL DIMENSIONS FOR VARIOUS RIM HEIGHTS Rim Height Application Adjustment 34" Adult Height ADA, TAS Adult Height TAS Adult...

Page 5 - Step 3: Install wall anchors; Figure 3

Express ® Crescent ® Lavatory System - CRS-Series Installation Instructions CRS-2/IR, CRS-3/IR 5 Bradley Corporation • 215-1330 Rev. K; EN 06-915 2/8/07 Installation Instructions continued . . . Step 3: Install wall anchors 1. Measure and mark the centerline of the lavatory system on the wall. 3. Us...

Page 6 - Step 6: Install drain spud; Step 7: Connecting Supply; Connect one end of the supply hoses to the; IMPORTANT: The hose attached to the hot; Express; Figure 4; DRAIN ASSEMBLY; Figure 5

Installation Instructions continued . . . Step 6: Install drain spud 1. Assemble the P-trap by (supplied by installer) connecting the 1-1/2" tubular pipe to the 1-1/4"tailpiece and to the 1-1/2" drain pipe stubbed outof the wall (see Figure 4). Step 7: Connecting Supply 1. Connect the 1/...

Page 7 - Electrical and supply connections; Figure 6a

Express ® Crescent ® Lavatory System - CRS-Series Installation Instructions CRS-2/IR, CRS-3/IR 7 Bradley Corporation • 215-1330 Rev. K; EN 06-915 2/8/07 Installation Instructions continued . . . Step 8: Electrical and supply connections NOTE: Refer to Figure 6a below for CRS-2/IR or Figure 6b on pag...

Page 8 - Electrical and supply connections, cont’d.; counterclockwise; Figure 6b

Installation Instructions continued . . . Step 8: Electrical and supply connections, cont’d. 6. Check the temperature when approximately 1.0 GPM water flow is reached and adjust if necessary (the range of the valve is95°F–115°F (35°C–43°C). To adjust the temperature, follow theprocedure below: • Loo...

Page 9 - Step 9: Install the Optional Soap Dispenser; Carefully place the top cover on top of the lavatory system bowl.

Express ® Crescent ® Lavatory System - CRS-Series Installation Instructions CRS-2/IR, CRS-3/IR 9 Bradley Corporation • 215-1330 Rev. K; EN 06-915 2/8/07 Installation Instructions continued . . . Step 9: Install the Optional Soap Dispenser For Express® Crescent® Lavatory System units with optional so...

Page 10 - Cleaning and Maintenance Instructions; Terreon® and trap cover maintenance; cleaners can mar the surface.; remove soil and maintain the glossy finish.; Bowl and cover cleaning; Wipe the unit with a damp cloth and then wipe dry.

Express ® Crescent ® Lavatory System - CRS-Series CRS-2/IR, CRS-3/IR Installation Instructions 10 2/8/07 Bradley Corporation • 215-1330 Rev. K; EN 06-915 Cleaning and Maintenance Instructions IMPORTANT: Strong alkaline or acid-based chemicals and cleansers should not be used to clean the Crescent®. ...

Page 11 - Solenoid Valve Troubleshooting; CAUTION: Turn off water supplies to unit before troubleshooting.; careful not to lose the armature or spring (see Figure 8 on page 12).; An individual operating station fails to turn on.; valve and reconnect to the adjacent valve.

Express ® Crescent ® Lavatory System - CRS-Series Installation Instructions CRS-2/IR, CRS-3/IR 11 Bradley Corporation • 215-1330 Rev. K; EN 06-915 2/8/07 Solenoid Valve Troubleshooting CAUTION: Turn off water supplies to unit before troubleshooting. Problem: An individual operating station fails to ...

Page 12 - Figure 8

Express ® Crescent ® Lavatory System - CRS-Series CRS-2/IR, CRS-3/IR Installation Instructions 12 2/8/07 Bradley Corporation • 215-1330 Rev. K; EN 06-915 1 2 3 4 5 6 7 8 9 8 DE S CRIPTION QTY. PART NO. REF. 1 1 11 8 -307 VALVE BODY, 1/4" CLO S ED 2 1 269-9 8 3 DIAPHRAGM 3 1 269-577 ARMATURE 4 1 ...

Page 13 - Thermostatic Mixing Valve Troubleshooting; connections or leaking stop/check valves.; Problem: Limited water flow; Cause: Dirt and debris have built up in the valve or strainer.; Problem: External leaks in the system; Cause: Thermostat is slowly failing or not working at all.; increase; the temperature or; clockwise; to; decrease

Thermostatic Mixing Valve Troubleshooting NOTE: Before attempting to troubleshoot the valve or disassemble the components, check for thefollowing conditions: • If stop/check valves are used, make sure that they are fully open.• Make sure that the hot and cold inlet pipes are connected properly, and ...

Page 14 - Figure 9

Express ® Crescent ® Lavatory System - CRS-Series CRS-2/IR, CRS-3/IR Installation Instructions 14 2/8/07 Bradley Corporation • 215-1330 Rev. K; EN 06-915 Vernatherm™ Thermostatic Mixing Valve (S01-524) S trainer 173-028 Tempered Line Adapter Assembly (S39-685) Option Thermostat 5 1 7 1 O-Ring 8 1 O-...