Bowers & Wilkins CWM7 - Manuals

5 4. Installing CWM7 Series Speakers To install a CWM7 Series speaker proceed as described in the following paragraphs: 4.1 Using the supplied cut-out template, mark a cut line on the wall. Check the cut line defines the correct dimensions. Cut along the line with an appropriate tool to create an ap...

7 4.7 The baffle can now be inserted into the back box. The baffle insertion and attachment technique is slightly different in the case of the CWM7.3 and CWM7.4/5. In both cases however you should first ensure that the connector on the baffle is oriented correctly with the connector inside the back ...

8 4.8 A port plug accessory is included with CWM7 Series speakers. The plug can be used if desired to reduce bass output by obstructing the speaker’s reflex port. Simply push the plug into the reflex port. The diagram above illustrates insertion of the port plug. CWM7.4 and CWM7.5 Baffle Insertion T...

9 4.9 The grille can now be fitted to the baffle. It is held in place magnetically so simply needs to be aligned with the groove in the back box flange where it will click into place. The diagram above illustrates fitting the grille. The CWM7 Series speaker is now installed and ready for use.