Bowers & Wilkins CWM7 - Manual

Page 2 - Welcome to Bowers and Wilkins and the CWM7 Series

2 www.bowers-wilkins.com Welcome to Bowers and Wilkins and the CWM7 Series Thank you for choosing Bowers & Wilkins. When John Bowers first established our company he did so in the belief that imaginative design, innovative engineering and advanced technology were keys that could unlock the enjoy...

Page 3 - Environmental Information

3 www.bowers-wilkins.com 2. CWM7 Series Basics 1. CWM7 Carton Contents CWM7 Series in-wall speakers comprise a baffle carrying the speaker drivers and crossover, an integrated back-box and front flange, and a magnetically secured grille. The back box is connected via external terminals to the speake...

Page 4 - Positioning CWM7 Series Speakers; General Background Audio Applications:; Note: CWM7 Series drive units create stray

4 3. Positioning CWM7 Series Speakers All CWM7 Series speakers require a clear depth of 102mm (4.02 in) from the front of the ceiling surface. Note: The CWM7.3 can also be used in landscape orientation with aperture dimensions of 251mm (9.9 in) by 711mm (28 in) respectively height by width. No reser...

Page 5 - Installing CWM7 Series Speakers; Using the supplied cut-out template, mark a cut

5 4. Installing CWM7 Series Speakers To install a CWM7 Series speaker proceed as described in the following paragraphs: 4.1 Using the supplied cut-out template, mark a cut line on the wall. Check the cut line defines the correct dimensions. Cut along the line with an appropriate tool to create an ap...

Page 7 - The baffle can now be inserted into the back box.; CWM7.3 Baffle Insertion

7 4.7 The baffle can now be inserted into the back box. The baffle insertion and attachment technique is slightly different in the case of the CWM7.3 and CWM7.4/5. In both cases however you should first ensure that the connector on the baffle is oriented correctly with the connector inside the back ...

Page 8 - A port plug accessory is included with CWM7

8 4.8 A port plug accessory is included with CWM7 Series speakers. The plug can be used if desired to reduce bass output by obstructing the speaker’s reflex port. Simply push the plug into the reflex port. The diagram above illustrates insertion of the port plug. CWM7.4 and CWM7.5 Baffle Insertion T...

Page 9 - The grille can now be fitted to the baffle. It is held in

9 4.9 The grille can now be fitted to the baffle. It is held in place magnetically so simply needs to be aligned with the groove in the back box flange where it will click into place. The diagram above illustrates fitting the grille. The CWM7 Series speaker is now installed and ready for use.

Bowers & Wilkins CWM7 - Manual

Table of Contents:

Summary

Other Bowers & Wilkins Models