BISSELL 2588F - Manuals - manualsarea.com

Page 3 - SAVE THESE INSTRUCTIONS; ORIGINAL INSTRUCTIONS. FOR OPERATION ON A 220-240 VOLT; IMPORTANT INFORMATION

global.BISSELL.com 3 Brush Roll Drying Tray with Rinse Funnel Vacuum Filter Handle Multi-Surface Tangle Free Brush Roll 3-in-1 Docking Station with Charging Adapter Plug Multi-Surface Pet with Ambipur® Formula Wood Floor Formula Safety Instructions . . . . . . . . . . . 2 Product View . . . . . . . ...

Page 5 - Assembly; Cleaning Formulas; WARNING

global.BISSELL.com 5 3 4 Assembly Insert handle into body of unit until you hear a “click”. click click Slide the over hang in the middle of the Brush Roll Drying Tray with Rinse Funnel down into the opening on the Storage Tray that is indicated with arrows. Then, place the Rinse Cup into the Rinse ...

Page 7 - Filling the Clean Water Tank

global.BISSELL.com 7 Filling the Clean Water Tank 1 4 2 5 Lift the Clean Water Tank straight up to remove from the machine. The Clean Water Tank is located on the back of the machine. For small area cleaning (32.5 sq m) a. Fill Clean Water Tank with warm tap water to the first water fill line. b. Th...

Page 8 - ATTENTION; Cleaning Your Floors

global.BISSELL.com 8 2 4 1 3 Before each use, hold the Solution Spray Trigger for 10 seconds to prime the system with cleaning solution. LED lights illuminate when holding the trigger. NOTE: When solution is flowing, you will see bubbles forming at the edges of the Brush Roll Window. ATTENTION Do no...

Page 10 - NOTICE

global.BISSELL.com 10 9 7 8 Pull Brush Roll out by grabbing the Brush Roll tab and pulling upward. Place the Brush Roll upright in the Brush Roll Drying Tray to dry. Remove the unit from the 3-in-1 Docking Station and wipe out the tray. Do NOT rinse under faucet directly to avoid water going into th...

Page 11 - Emptying the Dirty Water Tank

global.BISSELL.com 11 Emptying the Dirty Water Tank 1 2 3 To release Dirty Water Tank, press down on recessed button on the top of the tank. Grasp top of Dirty Water Tank in recessed areas on each side of the filter and pull upward to remove the top of the tank. Pour dirty water out into sink. Rinse...

Page 13 - Cleaning the Brush Roll and Chamber

global.BISSELL.com 13 5 4 3 1 Cleaning the Brush Roll and Chamber WARNING To reduce the risk of fi re, electric shock or injury, turn power OFF and disconnect plug from electrical outlet before performing maintenance or troubleshooting. 2 Grasp Brush Roll Window on the front of its face and pull upw...

Page 14 - Disposing of the Batteries

global.BISSELL.com 14 Disposing of the Batteries NOTICE: Disconnecting the battery will destroy the appliance and invalidate the warranty. 1 2 Cut the red positive (+) battery wire with rubber handled wire cutters. Wrap the end of the red cut wire with electrical tape. Then, individually cut the rem...

Page 15 - Troubleshooting

global.BISSELL.com 15 Problem Possible Causes Remedies Reduced spray OR no spray Clean Water Tank may be empty Refill tank Clean Water Tank may not be seated completely Turn power OFF / Remove and reseat tank System isn’t completely primed Hold trigger for 10 to 15 seconds Brush Roll Window is not l...

Page 16 - Consumer Guarantee

16 ©2019 BISSELL Inc. Grand Rapids, Michigan All rights reserved. Printed in China Part Number 161-8461 05/19 Visit the BISSELL website: www.BISSELL.com.au When contacting BISSELL, have model number of cleaner available.Please record your Model Number: Please record your Purchase Date: NOTE: Please ...