Page 3 - ii
ii NAT Sessions ............................................................................................................................... 34 Diagnostic..................................................................................................................................... 34 UPnP P...
Page 5 - Chapter 1: Introduction; Introduction to your Router; SHDSL Multi-Mode Standard
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 1: Introduction 1 Chapter 1: Introduction Introduction to your Router Welcome to the Billion BiPAC 8500/ 8501/ 8520/ 8521 SHDSL Router. Your SHDSL router is an “all-in-one” unit, combining an SHDSL modem, SHDSL router and ...
Page 6 - SOHO Firewall Security with DoS and SPI
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 1: Introduction 2 devices. With this feature enabled, users can now connect to Net meeting or MSN Messenger seamlessly. Network Address Translation (NAT) Allows multi-users to access outside resources such as the Internet ...
Page 7 - It is an easy way to remotely manage the router via SNMP.
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 1: Introduction 3 Rich Packet Filtering Not only filters the packet based on IP address, but also based on Port numbers. It will filter packets from and to the Internet. It also provides a higher level of security control....
Page 8 - Chapter 2: Installing the Router; Important note for using this Router; Attention
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 2: Installing the router 4 Chapter 2: Installing the Router Important note for using this Router Package Contents SHDSL Firewall Bridge/Router (BiPAC 8500/8520) or SHDSL.bis Firewall Bridge/Router (BiPAC 8501/8521) CD-ROM ...
Page 9 - The Front LEDs of BiPAC 8500; LED; Blinking when data is Transmitted / Received.; SYS; Lit when the system is ready.; PWR; Lit when power is ON.
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 2: Installing the router 5 The Front LEDs of BiPAC 8500 LED Meaning 1 LINE Lit when successfully connected to SHDSL line and when it is synchronized. 2 LAN Port 1X — 4X (RJ-45 connector) Lit when connected to an Ethernet d...
Page 10 - The Front LEDs of BiPAC 8520
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 2: Installing the router 6 The Front LEDs of BiPAC 8520 LED Meaning 1 2 LINE 1 & 2 Lit when successfully connected to SHDSL line and when it is synchronized. 3 LAN Port 1X — 4X (RJ-45 connector) Lit when connected to a...
Page 11 - The Front LEDs of BiPAC 8501
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 2: Installing the router 7 The Front LEDs of BiPAC 8501 LED Meaning 1 PWR Lit when power is ON. 2 SYS Lit when the system is ready. 3 LAN Port 1X — 4X (RJ-45 connector) Lit when connected to an Ethernet device. Green for 1...
Page 12 - The Front LEDs of BiPAC 8521; Lit green when power is ON.
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 2: Installing the router 8 The Front LEDs of BiPAC 8521 LED Meaning 1 PWR Lit green when power is ON. 2 SYS Flashes when the system is being started. Then lit green when the system is ready. 3 LAN Port 1X — 4X (RJ-45 conne...
Page 13 - Caution; : After pressing the RESET button for more than 6
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 2: Installing the router 9 The Rear Ports of BiPAC 8500 / 8520 Port Meaning 1 Power Switch Power ON/OFF switch 2 PWR Connect the supplied power adapter to this jack. 3 RESET To be sure the device is being turned on press R...
Page 14 - The Rear Ports of BiPAC 8501; : After pressing the RESET button for more than 6 seconds, to
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 2: Installing the router 10 The Rear Ports of BiPAC 8501 Port Meaning 1 Power Switch Power ON/OFF switch 2 PWR Connect the supplied power adapter to this jack. 3 RESET To be sure the device is being turned on->press RES...
Page 15 - The Rear Ports of BiPAC 8521
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 2: Installing the router 11 The Rear Ports of BiPAC 8521 Port Meaning 1 Power Switch Power ON/OFF switch 2 PWR Connect the supplied power adapter to this jack. 3 RESET To be sure the device is being turned on->press RES...
Page 16 - Cabling
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 2: Installing the router 12 Cabling One of the most common causes to problem is bad cabling or SHDSL line(s). Make sure that all connected devices are turned on. On the front panel of the product is a row of LEDs. Verify t...
Page 17 - Chapter 3: Basic Installation; and the subnet mask is; Connecting your router; Connect the Router to a
Billion BiPAC SHDSL/SHDSL.bis (VPN) Firewall Bridge/ Router Chapter 3: Basic Installation 13 Chapter 3: Basic Installation The router can be configured with your web browser. A web browser is included as a standard application in the following operating systems: Linux, Mac OS, Windows 98/NT/2000/XP/...
Page 18 - Network Configuration; For Windows Vista
Billion BiPAC SHDSL/SHDSL.bis (VPN) Firewall Bridge/ Router Chapter 3: Basic Installation 14 Network Configuration For Windows Vista 1. Go to Start . Click on Network . 2. Then click on Network and Sharing Center at the top bar. 3. When the Network and Sharing Center window pops up, select and click...
Page 20 - For Windows XP; Go to
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 3: Basic Installation 16 For Windows XP 1. Go to Start / Control Panel (in Classic View) . In the Control Panel, double-click on Network Connections 2. Double-click Local Area Connection . 3. In the Local Area Connection S...
Page 21 - Internet Protocol
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 3: Basic Installation 17 4. Select Internet Protocol (TCP/IP) and click Properties . 5. Select the Obtain an IP address automatically and the Obtain DNS server address automatically radio buttons. 6. Click OK to finish the...
Page 24 - and choose the
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 3: Basic Installation 20 For Windows 98/Me 1 . Go to Start / Settings / Control Panel . In the Control Panel, double-click on Network and choose the Configuration tab. 2. Select TCP/IP ->NE2000 Compatible , or the name ...
Page 25 - Then select the; DNS; Select the; Disable DNS; radio; OK; to finish
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 3: Basic Installation 21 4. Then select the DNS Configuration tab. 5. Select the Disable DNS radio button and click OK to finish the configuration.
Page 27 - Factory Default Settings; Device LAN IP Settings:; enabled; : After pressing the RESET button for more than 6 seconds, to be
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 3: Basic Installation 23 Factory Default Settings Before configuring your router, you need to know the following default settings. Web Interface (Username and Password): Username: admin Password: admin The default username...
Page 28 - Information from your ISP; PPPoE
Billion BiPAC SHDSL/SHDSL.bis (VPN) Firewall Bridge/ Router Chapter 3: Basic Installation 24 Information from your ISP Before configuring this device, you have to check with your ISP (Internet Service Provider) to find out what kind of service is provided such as DHCP (Obtain an IP Address Automatic...
Page 29 - Configuring with your Web Browser; and click “; Go; ”, a user name and password window prompt will appear.; The default username
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 3: Basic Installation 25 Configuring with your Web Browser Open your web browser, enter the IP address of your router, which by default is 192.168.1.254 , and click “ Go ”, a user name and password window prompt will appea...
Page 30 - Chapter 4: Configuration; Status
Billion BiPAC SHDSL/SHDSL.bis (VPN) Firewall Bridge/ Router Chapter 4: Configuration 26 Chapter 4: Configuration At the configuration homepage, the left navigation pane where bookmarks are provided links you directly to the desired setup page, including: Status - ARP Table - Routing Table - DHCP Tab...
Page 31 - ARP Table; Firewall –
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 4: Configuration 27 Status ARP Table This section displays the router’s ARP (Address Resolution Protocol) Table, which shows the mapping of Internet (IP) addresses to Ethernet (MAC) addresses. This is a useful & quick ...
Page 32 - Routing Table
Billion BiPAC SHDSL/SHDSL.bis (VPN) Firewall Bridge/ Router Chapter 4: Configuration 28 Routing Table Routing Table Valid: It indicates a successful routing status. Destination: The IP address of the destination network. Netmask: The destination netmask address. Gateway/Interface: The IP address of ...
Page 33 - DHCP Table; Leased Table
Billion BiPAC SHDSL/SHDSL.bis (VPN) Firewall Bridge/ Router Chapter 4: Configuration 29 DHCP Table Leased: The DHCP assigned IP addresses information. IP Address: A list of IP addresses of devices on your LAN (Local Area Network). Expired: The expired IP addresses information. Permanent: The fixed h...
Page 36 - Email Status; Advanced
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 4: Configuration 32 L2TP Status (BiPAC 8500/ 8501/ 8520 Only) This shows details of your configured L2TP VPN Connections. • Name: The name you assigned to the particular L2TP connection in your VPN configuration. • Type: T...
Page 37 - Event Log; Configuration – Firewall; section of the; Firewall; section of this manual for more details on how to enable; Error Log
Billion BiPAC SHDSL/SHDSL.bis (VPN) Firewall Bridge/ Router Chapter 4: Configuration 33 Event Log This page displays the router’s Event Log entries. Major events are logged to this window, such as when the router’s ADSL connection is disconnected, and Firewall events such as when you have enabled In...
Page 38 - NAT Sessions; PING; is shown FAIL and the rest is PASS, you ought
Billion BiPAC SHDSL/SHDSL.bis (VPN) Firewall Bridge/ Router Chapter 4: Configuration 34 NAT Sessions This section lists all current NAT sessions between interface of types external (WAN) and internal (LAN). Diagnostic It tests the connection of computer(s) which is connected to LAN ports and also th...
Page 39 - UPnP Portmap; configuration options.
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 4: Configuration 35 UPnP Portmap The section lists all port-mapping established using UPnP (Universal Plug and Play). Please see the Advanced section of this manual for more details on UPnP and the router’s UPnP configurat...
Page 40 - Quick Start; WAN
Billion BiPAC SHDSL/SHDSL.bis (VPN) Firewall Bridge/ Router Chapter 4: Configuration 36 Quick Start For detailed instructions on configuring your WAN settings, please see the WAN section of this manual. Usually, the only details you will need for the Quick Start wizard to get you online are your log...
Page 41 - Select the desired option from the list and click; Apply; to return to the Quick Start interface to
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 4: Configuration 37 Select the desired option from the list and click Apply to return to the Quick Start interface to continue configuring your ISP connection. Please note that the contents of this list will vary, dependin...
Page 42 - Configuration; There are seven items within the LAN section:; Client Filter, Port Setting; and; DHCP Server; Bridge Interface
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 4: Configuration 38 Configuration When you click this item, you will get the following sub-items to configure your router: LAN, WAN, System, Firewall, VPN (not available in 8521), QoS, Virtual Server, Time Schedule and Adv...
Page 43 - Edit Ethernet Interface Parameter; To specify which VLAN group is responsible for device management,; Ethernet; Primary IP Address; The default IP of this router.
Billion BiPAC SHDSL/SHDSL.bis (VPN) Firewall Bridge/ Router Chapter 4: Configuration 39 Edit Ethernet Interface Parameter Click on a specific Ethernet you that you wish to edit its interface parameter under the Bridged Interface section. You can also edit the Ethernet Interface parameter such as its...
Page 44 - IP Alias
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 4: Configuration 40 IP Alias This function supports the creation of multiple virtual IP interfaces on this router. It helps to connect two or more local networks to the ISP or a remote node. In this case, an internal route...
Page 45 - Ethernet Client Filter; Ethernet Client Filter:; Default setting is set to; Disable; Address in the space provided or click; Active PC in LAN
Billion BiPAC SHDSL/SHDSL.bis (VPN) Firewall Bridge/ Router Chapter 4: Configuration 41 Ethernet Client Filter The Ethernet Client Filter supports up to 16 Ethernet network machines that helps you to manage your network control to accept traffic from specific authorized machines or to restrict unwan...
Page 46 - Add; to insert to the
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 4: Configuration 42 Active PC in LAN displays a list of IP Address & MAC Address of each individual Ethernet device which is connected to the router. You can check the box next to the IP address to block or allow. Then...
Page 47 - Port Setting; Auto; , which users should keep unless; octet of; octet of each IP packet. If the
Billion BiPAC SHDSL/SHDSL.bis (VPN) Firewall Bridge/ Router Chapter 4: Configuration 43 Port Setting This section allows you to configure the settings for the router’s Ethernet ports to solve some of the compatibility problems that may be encountered while connecting to the Internet, as well allowin...
Page 49 - If you check; DHCP Relay Agent; and click; Next; , then you will have to enter the IP address of; to enable this function.
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 4: Configuration 45 If you check DHCP Relay Agent and click Next , then you will have to enter the IP address of the DHCP server which will assign an IP address back to the DHCP client in the LAN. Use this function only if...
Page 50 - ISP; to input other
Billion BiPAC SHDSL/SHDSL.bis (VPN) Firewall Bridge/ Router Chapter 4: Configuration 46 WAN (Wide Area Network) WAN refers to your Wide Area Network connection, i.e. your router’s connection to your ISP and the Internet. There are three items within the WAN section: ISP , DNS and SHDSL . ISP The fac...
Page 51 - RFC 1483 Routed Connections; Encapsulation method:
Billion BiPAC SHDSL/SHDSL.bis (VPN) Firewall Bridge/ Router Chapter 4: Configuration 47 RFC 1483 Routed Connections • Description: User-definable name for the connection. • VPI and VCI: Enter the information provided by your ISP. • ATM Class: The Quality of Service for ATM layer. • NAT: The NAT (Net...
Page 52 - given by you our ISP.; MAC Address Spoofing:; This option is required by Service Providers. You must fill in
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 4: Configuration 48 given by you our ISP. • RIP: RIP v1, RIP v2, and RIP v2 Multicast. Check to enable RIP function. • MTU: Maximum Transmission Unit. The size of the largest datagram (excluding media- specific headers) th...
Page 53 - RFC 1483 Bridged Connections
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 4: Configuration 49 RFC 1483 Bridged Connections • Description: User-definable name for the connection. • VPI and VCI: Enter the information provided by your ISP. • ATM Class: The Quality of Service for ATM layer. • Encaps...
Page 54 - PPPoA Routed Connections; Enter the information provided by your ISP.
Billion BiPAC SHDSL/SHDSL.bis (VPN) Firewall Bridge/ Router Chapter 4: Configuration 50 PPPoA Routed Connections • Description: User-definable name for the connection. • VPI/VCI: Enter the information provided by your ISP. • ATM Class: The Quality of Service for ATM layer. • NAT: The NAT (Network Ad...
Page 55 - Authentication Protocol Type:
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 4: Configuration 51 Provider (ISP) automatically or not. Please click Obtain an IP address automatically via DHCP client to enable the DHCP client function or click Specify an IP address to disable the DHCP client function...
Page 57 - IPoA Routed Connections; IP Assignment
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 4: Configuration 53 IPoA Routed Connections • Description: User-definable name for the connection. • VPI/VCI: Enter the information provided by your ISP. • ATM Class: The Quality of Service for ATM layer. • NAT: The NAT (N...
Page 58 - This option helps to auto detect the optimal MTU size. Default is
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 4: Configuration 54 • RIP: RIP v1, RIP v2, and RIP v2 Multicast. Check to enable RIP function. • MTU: Maximum Transmission Unit. The size of the largest datagram (excluding media- specific headers) that IP will attempt to ...
Page 59 - PPPoE Connections; User-definable name for this connection.
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 4: Configuration 55 PPPoE Connections • Description: User-definable name for this connection. • VPI/VCI: Enter the information provided by your ISP. • ATM Class: The Quality of Service for ATM layer. • NAT: The NAT (Networ...
Page 60 - Authentication Protocol:
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 4: Configuration 56 alphanumeric characters (case sensitive). This will usually be in the format of “username@ispname” instead of simply “username”. • Password: Enter the password provided by your ISP. You can input up to ...
Page 62 - PPPoE with Pass-through Connections
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 4: Configuration 58 PPPoE with Pass-through Connections To access PPPoE with Pass-through Connection: Press Change > PPPoE Routed with Pass- Through > Quick Start PPPoE with pass-through adapts the following method: ...
Page 65 - Give DNS to Relay:
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 4: Configuration 61 Advanced Options (PPPoE) LLC Header: Select encapsulation mode, true for using LLC or false for using VC-Mux. Create Route: This setting specifies whether a route is to be added to the system after IPCP...
Page 66 - Discover Primary NBNS / Discover Secondary NBNS:; This setting enables/disables whether; Discover Subnet Mask:; Enable to change your DHCP Server settings by using
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 4: Configuration 62 Discover Primary NBNS / Discover Secondary NBNS: This setting enables/disables whether the primary/secondary NBNS server address is requested from a remote PPP peer using IPCP. The default setting for t...
Page 67 - Enable; box. Usually when you choose PPPoE or PPPoA
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 4: Configuration 63 DNS A Domain Name System (DNS) contains a mapping table for domain name and IP addresses. On the Internet, every host has a unique and user-friendly name (domain name) such as www.helloworld.com and an ...
Page 68 - Back; Once Active Line is selected as; false; , you must enable the Active Line to; true; again and; DSP Firmware Version:
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 4: Configuration 64 SHDSL-BiPAC 8500 • Mode: The SHDSL device can function as a CPE (Customer Premises Equipment) or CO (Central Office). Select CPE mode when the BiPAC 8500 is connected to your ISP. • Back – to –back: it ...
Page 69 - Display SHDSL line synch speed rate.; button to apply your changes.
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 4: Configuration 65 • Bit Rate: Display SHDSL line synch speed rate. Click Apply button to apply your changes.
Page 70 - the 4-wired handshaking procedure that is compliant with ITU-T
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 4: Configuration 66 SHDSL – BiPAC 8520 Standard 4-wired connection: the 4-wired handshaking procedure that is compliant with ITU-T standard. False 4-wired connection: This mode is used when 4-wired connection is disabled.
Page 72 - When select; Port 1; settings need to be configured and the SHDSL; LINE 1; on the back of the device.
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 4: Configuration 68 Note: When select 2-wired mode , only Port 1 settings need to be configured and the SHDSL (RJ-11 cable) must be connected to LINE 1 on the back of the device.
Page 75 - the 4-wired handshaking procedure that is compliant
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 4: Configuration 71 SHDSL – BiPAC 8521 Standard 4-wired connection: the 4-wired handshaking procedure that is compliant with ITU-T standard. False 4-wired connection: This mode is used when 4-wired connection is disabled.
Page 76 - Conexant enhanced 4-wired mode and compliant with
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 4: Configuration 72 Enhanced 4-wired connection: Conexant enhanced 4-wired mode and compliant with Conexant Legacy codes.
Page 78 - System; Time Zone; Summer Time Period.
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 4: Configuration 74 System Listed are items within the System section: Time Zone, Remote Access, Firmware Upgrade, Backup/Restore, Restart and User Management. Time Zone The router does not have a real time clock on board;...
Page 79 - Remote Access; You may change other; Device Management; options in; section of the GUI.
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 4: Configuration 75 Remote Access To temporarily permit remote administration of the router (i.e. from outside your LAN), select a time period the router will permit remote access and click Enable. You may change other con...
Page 80 - Firmware Upgrade; Clicking on; Browse; Warning
Billion BiPAC SHDSL/SHDSL.bis (VPN) Firewall Bridge/ Router Chapter 4: Configuration 76 DO NOT power down the router or interrupt the firmware upgrading while it is still in process. Improper operation could damage the router. Firmware Upgrade Your router’s “firmware” is the software that allows it ...
Page 81 - Backup
Billion BiPAC SHDSL/SHDSL.bis (VPN) Firewall Bridge/ Router Chapter 4: Configuration 77 Backup / Restore These functions allow you to save and to create a backup of your router current settings to a file on your PC, or to restore a previously saved setting. This is useful if you wish to experiment w...
Page 82 - Restart Router; Restart; Factory Default Settings; RESET
Billion BiPAC SHDSL/SHDSL.bis (VPN) Firewall Bridge/ Router Chapter 4: Configuration 78 Restart Router Click Restart with option Current Settings to reboot your router (and restore your last saved configuration). If you wish to restart the router using the factory default settings (for example, afte...
Page 83 - User Management
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 4: Configuration 79 User Management In order to prevent unauthorized access to your router’s configuration interface, all users are required to login to the system with a password. You can set up multiple user accounts, ea...
Page 84 - Firewall and Access Control; : This masks LAN users’ IP addresses which is invisible to outside; Firewall Security and Policy (General Settings); : Inbound direction of Packet Filter; Intrusion Detection; : Enable Intrusion Detection to detect, prevent and log malicious; Access Control
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 4: Configuration 80 When using Virtual Servers, your PCs will be exposed at a certain degree specified in your Virtual Server settings when the ports specified are opened in your firewall packet filter settings. Firewall a...
Page 85 - : Outbound direction of Packet Filter; URL Filter; : To block PCs on your local network from unwanted websites.
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 4: Configuration 81 • Firewall Security and Policy (General Settings) : Outbound direction of Packet Filter rules to prevent unauthorized computers or applications accessing the Internet. • URL Filter : To block PCs on you...
Page 86 - General Settings; Low
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 4: Configuration 82 Any remote user who is attempting to perform this action may result in blocking all the access to configure and management of the device from the Internet. General Settings You can choose not to enable ...
Page 87 - Packet Filter; Port Filter; for more detailed information.
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 4: Configuration 83 Packet Filter This function is only available when Firewall is enabled and one of these four security levels is chosen (All blocked, High, Medium and Low). The predefined port filter rules in the Packet...
Page 88 - Example: Predefined Port Filters Rules; , you must define and create the port filter rules; Table 1: Predefined Port Filter; Port Number; NO; Not Applicable
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 4: Configuration 84 Example: Predefined Port Filters Rules The predefined port filter rules for High, Medium and Low security levels are listed. See Table 1. Note : Firewall – All Blocked/User-defined , you must define and...
Page 89 - Packet Filter – Add TCP/UDP Filter; Host IP Address; and use a; Host Subnet Mask
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 4: Configuration 85 Packet Filter – Add TCP/UDP Filter • Rule Name: User-define description to identify this entry or click to select existing predefined rules. The maximum name length is 32 characters. • Time Schedule: It...
Page 90 - Packet Filter – Add Raw IP Filter
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 4: Configuration 86 Packet Filter – Add Raw IP Filter • Rule Name: A user-defined name for identifying the rule. • Time Schedule: It is self-defined time period. You may specify a time schedule for your prioritization poli...
Page 91 - Note; Internet
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 4: Configuration 87 Example: Configuring your firewall to allow for a publicly accessible web server on your LAN The predefined port filter rule for HTTP (TCP port 80) is the same whether the firewall is set to a high, med...
Page 92 - Configuring Packet Filter:; the predefined rule instead of; it. This is an example to; Delete; to delete the existing HTTP rule.; Click Add TCP/UDP Filter
Billion BiPAC SHDSL/SHDSL.bis (VPN) Firewall Bridge/ Router Chapter 4: Configuration 88 Configuring Packet Filter: 1. Click Port Filters . You will then be presented with the predefined port filter rules screen (in this case for the low security level), shown below: Note : You may click Edit the pre...
Page 93 - The new port filter rule for HTTP is shown below:
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 4: Configuration 89 5. The new port filter rule for HTTP is shown below: 6. Configure your Virtual Server (“port forwarding”) settings so that incoming HTTP requests on port 80 will be forwarded to the PC running your web ...
Page 94 - Intrusion Detection
Billion BiPAC SHDSL/SHDSL.bis (VPN) Firewall Bridge/ Router Chapter 4: Configuration 90 Intrusion Detection The router’s Intrusion Detection System (IDS) is used to detect hacker attacks and intrusion attempts from the Internet. If the IDS function of the firewall is enabled, inbound packets are fil...
Page 95 - SYN Flood
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 4: Configuration 91 (PING). For SYN Flood , ICMP Echo Storm and ICMP flood , IDS will just warn the user in the Event Log. It cannot protect against such attacks. Table 2: Types of Hacker attack recognized by the IDS. 1 De...
Page 96 - ICMP Flood
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 4: Configuration 92 ICMP Flood Max ICMP Count (Default 100 c/sec) Yes ICMP Echo Max PING Count (Default 15 c/sec) Yes Src IP : Source IP Src Port : Source Port Dst Port : Destination Port Dst IP : Destination IP
Page 97 - URL Filtering; Time Schedule
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 4: Configuration 93 URL Filtering URL (Uniform Resource Locator – e.g. an address in the form of http://www.abcde.com or http://www.example.com ) filter rules allow you to prevent users on your network from accessing parti...
Page 98 - Domain Filtering; Trusted
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 4: Configuration 94 dropped. 3. If the packet does not match either of the above two items, it is sent to the remote web server. 4. Please be noted that the completed URL, “www” + domain name, shall be specified. For examp...
Page 99 - Instant Message Blocking:; Instant Message Blocking; Peer to Peer Blocking:; Peer to Peer Blocking
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 4: Configuration 95 IM / P2P Blocking IM, short for Instant Message, is required to use client program software that allows users to communicate, in exchanging text message, with other IM users in real time over the Intern...
Page 100 - Firewall Log; Check the; box to activate the logs.; Status – Event Log
Billion BiPAC SHDSL/SHDSL.bis (VPN) Firewall Bridge/ Router Chapter 4: Configuration 96 Firewall Log Firewall Log displays log information of all unexpected action taken by your firewall settings. Check the Enable box to activate the logs. Log information can be seen in the Status – Event Log after ...
Page 102 - PPTP Connection - Remote Access
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 4: Configuration 98 PPTP Connection - Remote Access (BiPAC 8500/ 8501/ 8520 Only) • Connection Name: A user-defined name for the connection (e.g. “connection to office”). • Type: Check Dial Out if you want your router to o...
Page 103 - Stateful
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 4: Configuration 99 • Mode: You may select Stateful or Stateless mode. The key will be changed every 256 packets when you select Stateful mode. If you select Stateless mode, the key will be changed in each packet. • Idle T...
Page 104 - Example: Configuring a Remote Access PPTP VPN Dial-out Connection
Billion BiPAC SHDSL/SHDSL.bis (VPN) Firewall Bridge/ Router Chapter 4: Configuration 100 Example: Configuring a Remote Access PPTP VPN Dial-out Connection An office of a company establishes a PPTP VPN connection with a file server located at a different location. The router is installed at the offic...
Page 105 - Configuring the PPTP VPN in the Office
Billion BiPAC SHDSL/SHDSL.bis (VPN) Firewall Bridge/ Router Chapter 4: Configuration 101 Configuring the PPTP VPN in the Office You can either input the IP address (69.1.121.33 in this case) or the hostname to reach the server. Item Function Description 1 Connection Name VPN_PPTP Given name of PPTP ...
Page 106 - PPTP Connection - LAN to LAN
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 4: Configuration 102 PPTP Connection - LAN to LAN (BiPAC 8500/ 8501/ 8520 Only) • Connection Name: A user-define description of the connection. • Type: Check Dial Out if you want your router to operate as a client (connect...
Page 108 - MUST be in different subnet; with LAN to LAN
Billion BiPAC SHDSL/SHDSL.bis (VPN) Firewall Bridge/ Router Chapter 4: Configuration 104 Example: Configuring a PPTP LAN-to-LAN VPN Connection The branch office establishes a PPTP VPN tunnel with the head office to connect two private networks over the Internet. The routers are installed in the head...
Page 109 - Configuring PPTP VPN in the Head Office
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 4: Configuration 105 Configuring PPTP VPN in the Head Office The IP address 192.168.1.201 will be assigned to the router located in the branch office. Please make sure this IP is not used in the head office LAN. Item Funct...
Page 111 - Create
Billion BiPAC SHDSL/SHDSL.bis (VPN) Firewall Bridge/ Router Chapter 4: Configuration 107 IPSec (IP Security Protocol) (BiPAC 8500/ 8501/ 8520 Only) Click Create to create a new IPSec VPN connection account. After you have created the IPSec connection, account information will be displayed. (See exam...
Page 112 - IPSec VPN Connection; NONE
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 4: Configuration 108 IPSec VPN Connection (BiPAC 8500/ 8501/ 8520 Only) • Connection Name: User-defined name for the connection (e.g. “connection to office”). • Local Network: Set the IP address, subnet or address range of...
Page 113 - DES
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 4: Configuration 109 o SHA1: A one-way hashing algorithm that produces a 160−bit hash. • Encryption: Select the encryption method from the pull-down menu. There are several options, DES , 3DES , AES (128, 192 and 256) and ...
Page 114 - Advanced Option
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 4: Configuration 110 Advanced Option This function is only available after finish creating an IPSec account. Click Advanced Option to change the following settings: • IKE (Internet key Exchange) Mode: Select IKE mode to Ma...
Page 115 - Pings to the IP
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 4: Configuration 111 more powerful but increase the latency. DES: Stands for Data Encryption Standard, it uses 56 bits encryption method. 3DES: Stands for Triple Data Encryption Standard, it uses 168 (56*3) bits encryption...
Page 116 - Ping to the IP; Action; No
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 4: Configuration 112 from 0 to 3600 second; 0 second disables the function. Ping to the IP Internal (sec) Ping to the IP Action 0.0.0.0 0 No 0.0.0.0 2000 No xxx.xxx.xxx.xxx (A valid IP Address) 0 No xxx.xxx.xxx.xxx(A valid...
Page 117 - MUST be in different subnet
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 4: Configuration 113 Branch Office Head Office Local Network ID 192.168.0.0/24 192.168.1.0/24 Local Router IP 69.1.121.30 69.1.121.3 Remote Network ID 192.168.1.0/24 192.168.0.0/24 Remote Router IP 69.1.121.3 69.1.121.30 I...
Page 118 - Configuring IPSec VPN in the Head Office
Billion BiPAC SHDSL/SHDSL.bis (VPN) Firewall Bridge/ Router Chapter 4: Configuration 114 Configuring IPSec VPN in the Head Office Item Function Description 1 Connection Name IPSec_HeadOffice Given a name of IPSec connection Subnet Check the Subnet radio button IP Address 192.168.1.0 2 Netmask 255.25...
Page 119 - None
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 4: Configuration 115 Prefer Forward Security None Pre-shared Key 12345678
Page 120 - Item
Billion BiPAC SHDSL/SHDSL.bis (VPN) Firewall Bridge/ Router Chapter 4: Configuration 116 Configuring IPSec VPN in the Branch Offiece Item Function Description 1 Connection Name IPSec_BranchOffice Given a name of IPSec connection Subnet Check the Subnet radio button IP Address 192.168.0.0 2 Netmask 2...
Page 122 - Configuring IPSec VPN in the Office
Billion BiPAC SHDSL/SHDSL.bis (VPN) Firewall Bridge/ Router Chapter 4: Configuration 118 Configuring IPSec VPN in the Office Item Function Description 1 Connection Name IPSec Given a name of IPSec connection Subnet Check the Subnet radio button IP Address 192.168.1.0 2 Netmask 255.255.255.0 Head off...
Page 124 - L2TP Connection - Remote Access
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 4: Configuration 120 L2TP Connection - Remote Access (BiPAC 8500/ 8501/ 8520 Only) L2TP VPN Connection • Connection Name: User-defined name for the connection (e.g. “connection to office”). • Type: Check the Dial Out radio...
Page 125 - Authentication, Encryption, Perfect Forward Secrecy; IPSec; is enabled
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 4: Configuration 121 • Idle Time : Auto-disconnect the VPN connection when there is no activity on the connection for a pre-determined period of time. 0 means this connection is always on. • Active as default route : Commo...
Page 126 - by advanced users only.; Tunnel Authentication:
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 4: Configuration 122 • Remote Host Name (Optional): Enter hostname of remote VPN device. It is a tunnel identifier from the Remote VPN device that will match the Remote hostname provided. If the remote hostname is matched,...
Page 127 - Example: Configuring a L2TP VPN - Remote Access Dial-in Connection
Billion BiPAC SHDSL/SHDSL.bis (VPN) Firewall Bridge/ Router Chapter 4: Configuration 123 Example: Configuring a L2TP VPN - Remote Access Dial-in Connection A remote worker establishes a L2TP VPN connection with the head office using Microsoft VPN Adapter (included with Windows XP/2000/ME, etc.). The...
Page 128 - Configuring L2TP VPN in the Office
Billion BiPAC SHDSL/SHDSL.bis (VPN) Firewall Bridge/ Router Chapter 4: Configuration 124 Configuring L2TP VPN in the Office The input IP address 192.168.1.200 will be assigned to the remote worker. Please make sure this IP is not used by the Office LAN. Item Function Description 1 Connection Name VP...
Page 129 - Example: Configuring a Remote Access L2TP VPN Dial-out Connection
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 4: Configuration 125 IPSec Enabled for enhancing your L2TP VPN security. Authentication MD5 Encryption 3DES Perfect Forward Secrecy None 6 Pre-shared Key 12345678 Both sites should use the same value. Example: Configuring ...
Page 130 - Configuring the L2TP VPN in the Office
Billion BiPAC SHDSL/SHDSL.bis (VPN) Firewall Bridge/ Router Chapter 4: Configuration 126 Configuring the L2TP VPN in the Office Item Function Description 1 Connection Name VPN_L2TP Given name of L2TP connection Dial out Check the Dial out radio button 2 Server IP Address (or Hostname) 69.121.1.33 A ...
Page 131 - Authentication; Example: Configuring your Router to Dial-in to the Server
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 4: Configuration 127 Authentication MD5 Encryption 3DES Perfect Forward Secrecy None Pre-shared Key 12345678 Both sites should use the same value. Example: Configuring your Router to Dial-in to the Server Currently, Micros...
Page 132 - L2TP Connection - LAN to LAN
Billion BiPAC SHDSL/SHDSL.bis (VPN) Firewall Bridge/ Router Chapter 4: Configuration 128 L2TP Connection - LAN to LAN (BiPAC 8500/ 8501/ 8520 Only) L2TP VPN Connection • Connection Name: User-defined description of the connection. • Type: Check the Dial Out radio button if you want your router to op...
Page 134 - used by advanced users only.
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 4: Configuration 130 must be able to verify the identity of its peer. This can be done by manually entering the pre-shared key into the router or hosts at both ends. • Remote Host Name (Optional): Enter hostname of remote ...
Page 135 - Security Algorithm MUST BE; identically set up at both ends.
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 4: Configuration 131 Example: Configuring L2TP LAN-to-LAN VPN Connection The branch office establishes a L2TP VPN tunnel with the head office to connect two private networks over the Internet. The routers are installed in ...
Page 136 - Configuring L2TP VPN in the Head Office
Billion BiPAC SHDSL/SHDSL.bis (VPN) Firewall Bridge/ Router Chapter 4: Configuration 132 Configuring L2TP VPN in the Head Office The IP address 192.168.1.200 will be assigned to the router located at the branch office. Please make sure this IP is not used by the head office LAN. Item Function Descri...
Page 138 - Configuring L2TP VPN in the Branch Office
Billion BiPAC SHDSL/SHDSL.bis (VPN) Firewall Bridge/ Router Chapter 4: Configuration 134 Configuring L2TP VPN in the Branch Office The IP address 69.1.121.30 is the Public IP address of the router located at head office. If you registered the DDNS (please refer to the DDNS section of this manual), y...
Page 140 - You can find three items under the; QoS; Outbound / Inbound IP
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 4: Configuration 136 QoS (Quality of Service) QoS function helps you to control your network traffic for each application from LAN (Ethernet and/or Wireless) to WAN (Internet). It facilitates you to control the different q...
Page 141 - Prioritization; Click Clear; You can click Clear to delete existing Application
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 4: Configuration 137 Prioritization There are three priority settings provided in the Router: • High • Normal (The default is normal priority for all of traffic without setting) • Low Average utilization of each priority t...
Page 142 - DSCP Marking; checking the DSCP through-out the QoS network.; Table 4: DSCP Mapping Table; DSCP Mapping Table; Standard DSCP; Disabled
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 4: Configuration 138 monitored. • DSCP Marking : Differentiated Services Code Point (DSCP), it is the first 6 bits in the ToS byte. DSCP Marking allows users to classify traffic based on DSCP value and send packets to next...
Page 143 - Click Clea; You can click; Clear; to delete existing Application.
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 4: Configuration 139 Outbound IP Throttling (LAN to WAN) IP Throttling allows you to limit the speed of IP traffic. The value entered will limit the speed of the application that you set to the specified value multiple of ...
Page 145 - Inbound Rate Limit; : To limit the speed of inbound traffic.; Example: QoS for your Network
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 4: Configuration 141 • Inbound Rate Limit : To limit the speed of inbound traffic. Example: QoS for your Network Connection Diagram Information and Settings Upstream: 928 kbps Downstream: 8 Mbps VoIP User : 192.168.1.1 Nor...
Page 146 - Mission-critical application
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 4: Configuration 142 0 100 200 300 400 500 kbps VoIP/VPN HIGH Othe rs NORMAL Re stricte d LOW Throughput VoIP/VPNHIGH OthersNORMAL Res tric tedLOW Mission-critical application VPN connection is a mission-critical applicati...
Page 147 - Advanced setting by using IP throttling
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 4: Configuration 143 Advanced setting by using IP throttling With IP throttling you can set more detailed parameters to manage bandwidth allocation even when the applications are located on the same level. Upstream: 928kbp...
Page 148 - configuration section of this manual for more information on; Add Virtual Server
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 4: Configuration 144 Virtual Server (“Port Forwarding”) In TCP/IP and UDP network, a port is a 16-bit number used to identify which application program (usually a server) incoming connections should be delivered to. Some p...
Page 150 - Application; Always On
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 4: Configuration 146 Example: If you like to access your Router remotely through the Web/HTTP at all time, you would need to enable port number 80 (Web/HTTP) and map to the Router IP Address. Then all incoming HTTP request...
Page 151 - Edit DMZ Host; Internal IP Address:
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 4: Configuration 147 Edit DMZ Host The DMZ Host is a local computer exposed to the Internet. When setting a particular internal IP address as the DMZ Host, all incoming packets that use the port number different from the o...
Page 152 - The subnet of the public/WAN IP address given by your ISP. If your ISP
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 4: Configuration 148 Edit One-to-One NAT (Network Address Translation) One-to-One NAT maps a specific private/local IP address to a global/public IP address. If you have multiple public/WAN IP addresses from you ISP, you a...
Page 154 - Example: List of some well-known and registered port numbers.
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 4: Configuration 150 Example: List of some well-known and registered port numbers. The Internet Assigned Numbers Authority (IANA) is the central coordinator for the assigning unique parameter values to the Internet protoco...
Page 155 - Time Zone; for details. You router time should
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 4: Configuration 151 Time Schedule The Time Schedule supports up to 16 time slots which helps you to manage your Internet connection. In each time profile, you may schedule specific day(s) i.e. Monday through Sunday to res...
Page 156 - Configuration of Time Schedule; Delete a Time Slot
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 4: Configuration 152 Configuration of Time Schedule Edit a Time Slot 1. Choose any Time Slot (ID 1 to ID 16) to edit, click Edit. Note: Watch it carefully, the days you have selected will present in capital letter. Lower c...
Page 157 - Static Routing
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 4: Configuration 153 Advanced Configuration options within the Advanced section are for users who wish to take advantage of the more advanced features of the router. Users who do not understand the features should not atte...
Page 158 - Dynamic DNS
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 4: Configuration 154 Dynamic DNS The Dynamic DNS function allows you to alias a dynamic IP address to a static hostname, allowing users whose ISP does not assign them a static IP address to use a domain name. This is espec...
Page 159 - Check Emails; Mail
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 4: Configuration 155 Check Emails This function allows you to have the router check your POP3 mailbox for new Email messages. The Mail LED on your router will lit when it detects new messages waiting for download. You may ...
Page 160 - Device Management; Embedded Web Server ( to Management IP accounts); You may specify an IP address used to logon and access the
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 4: Configuration 156 Device Management The Device Management advanced configuration settings allows you to control your router security options and device monitoring features. Embedded Web Server ( to Management IP account...
Page 161 - SNMP Access Control
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 4: Configuration 157 For Example: User A changes HTTP port number to 100 , specifies their own IP address of 192.168.1.55 , and sets the logout time to be 100 seconds. The router will only allow User A access from the IP a...
Page 162 - SNMP Version: SNMPv2c and SNMPv3
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 4: Configuration 158 SNMP V3: Specify a name and password for authentication. And define the access right from an identified IP address. Once the authentication has succeeded, user from this IP address will be able to view...
Page 164 - IGMP; Internet Group Management Protocol; VLAN Bridge
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 4: Configuration 160 IGMP IGMP, known as Internet Group Management Protocol , is used to manage hosts from multicast group. • IGMP Forwarding: Accept multicast packet. Default is set to Enable. • IGMP Snooping: Allow switc...
Page 165 - Step 1: Setup Member Ports; Step 2: Create WAN Interface
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 4: Configuration 161 Advanced VLAN Setup Example (Triply Play) VLAN_data: Ethernet Port 1, Wireless and Wireless WDS are reserved for Internet - On Ethernet port 1 I also need VC 0/40 bridged. VLAN_Vedio Ethernet ports: 2,...
Page 166 - Edit
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 4: Configuration 162 From the example, 0/40 is used for data/internet and with the assumption that PPPoE is used; click the Edit button to change the VPI/VCI to 0/40. Click Create to setup up an additional WAN interface fo...
Page 167 - All; Allows all types of ethernet packets through the port.; Ip; Allows only IP/ARP types of ethernet packets through the port.; Pppoe; Allows only PPPoE types of ethernet packets through the port.; Step 3: Setup VLAN Service
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 4: Configuration 163 • Acceptable Frame Type: Specify what kind of traffic can pass through this connection, whether all traffic or only VLAN tagged traffic. • Filter Type: Specify the type of Ethernet filtering performed ...
Page 168 - Step 4: IGMP Snooping Enable
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 4: Configuration 164 From the example: VLAN untagged ports for Data/Internet: ethernet, wireless and wireless_wds. VLAN untagged ports for Video: ethernet1, rfc-1483-0 ~ rfc-1483-6. Click Apply to made changes effective im...
Page 169 - Save Configuration to Flash; Save; Logout
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 4: Configuration 165 Save Configuration to Flash After changing the router configuration settings, you must save all of the configuration parameters to FLASH to avoid them being lost after turning off or resetting your rou...
Page 170 - Chapter 5: Troubleshooting; Problems starting up the router
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Chapter 5: Troubleshooting 166 Chapter 5: Troubleshooting If the router is not functioning properly, first check this chapter for simple troubleshooting before contacting your service provider. Problems starting up the router Prob...
Page 171 - APPENDIX A: Product Support and Contact Information; Most problems can be solved by referring to the; section in the User’s Manual; Troubleshooting; chapter, please contact the dealer
Billion BiPAC 8500/8501/8520/8521 SHDSL (VPN) Firewall Bridge/ Router Appendix A: Product Support and Contact Information 167 APPENDIX A: Product Support and Contact Information Most problems can be solved by referring to the Troubleshooting section in the User’s Manual . If you cannot resolve the p...
Billion 2073
Manual
Billion Dual-Port ADSL2+ Modem/Router
Manual
Billion BiPAC 2073
Manual
Billion BiGuard 50G
Manual
Billion S100N
Manual
Billion 3013G
Manual
Billion BIPAC-7100S
Manual
Billion BiGuard Series
Manual
Billion VoIP/(802.11g) ADSL2+ Router
Manual
Billion BIPAC 7500
Manual
Billion BIPAC 3012G
Manual
Billion CO1
Manual
Billion 3011G
Manual
Billion BIPAC-221
Manual
Billion 30
Manual
Billion ISDN TA128s
Manual
Billion BIPAC 2071
Manual