Billion 2073 - Manual

Features Physical layer data rate up to 200Mbps over existing Powerline. 1. Uses powerline technology that takes advantage of the unused bandwidth of the electrical 2. wiring in the home.Ideal for Triple Play applications such as IPTV, VoIP telephony and high-speed Internet 3. access.Support 10/100 ...

4 Chapter 2: Installing the Router Package Contents BiPAC 2073 BiPAC 2073 HomePlug AV 200 Ethernet Adapter • Quick Start Guide • CD (containing user manual and QSG) • Ethernet (CAT-5 LAN) cable • BiPAC 2074 BiPAC 2074 HomePlug AV 200 Ethernet Bridge with AC Pass Through • Quick Start Guide • CD (con...

6 Device Overview The Description of each labeled part is described in the table below. AC Outlet / AC Pass- thru (only available in BiPAC 2074) Filtered AC Pass-through available for electrical devices with Input: 100~240V AC, 50~60Hz, 6Amp (Maximum). 1.0 DET LED Blinking when detecting other HomeP...

8 Hardware Installation Refer to the following diagrams and direction to install the clip with BiPAC 2073: Example 1: EU clip. Please check the lock instruction on your clip. • If you got the “Triangle Lock”, refer to right diagram. •

Connecting the HomePlug Adapter It is easy to connect the device simply by performing the following instructions: Power Connection BiPAC 2073 Plug the Homeplug AV 200 Ethernet Adapter into the wall outlet/socket. BiPAC 2074 Plug the embedded AC power cable to the wall outlet/socket. Note: Plug/socke...

11 LAN Connection Connect the supplied RJ-45 Ethernet cable to the Ethernet port on HomePlug AV 200 Ethernet bridge/adapter and the other side to the device’s Ethernet interface.

AC Pass-Through Connection BiPAC 2074 only To plug IT electrical devices (e.g. ADSL router, Set-to-box, notebook..) into the built-in AC pass- through with an embedded low-pass filter to prevent electrical noise from interfering on your powering network. 12

Networking Setup Refer to the following steps: Connect a network cable to the adapter or bridge and then plug the device into a power 1. socket. Then connect the device to a PC, modem, router or set-top-box. 2. Create a secure network by a simply push off the network SYNC button. 3. BiPAC 2073 BiPAC...

Setup Utility After you complete the hardware installation, insert the CD-ROM to the CD-ROM drive to perform Setup Utility for network configuration. The Setup Utility will auto-run. Follow the step-by-step configuration wizard, the utility will guide you complete the basic network configuration. Se...

15 Quick Start (Setup Powerline Network) Push Button usage Sync Button is used to add a HomePlug device to a Powerline network or enable it to join a network by pressing the Sync Button of the device to turn it into Broadcast state or Join state. There are 3 types of Sync Button trigger states: Broa...

18 Chapter 3: Installation Utility Installation Place the BiPAC HomePlug AV 200 Utility auto-installation CD into your CD-ROM/DVD-ROM 1. drive and click on Utility for Easy Installation. If you have not installed Microsoft .NET Framework 2.0, click on Install Microsoft .NET 2. Framework 2.0 to insta...

19 Microsoft .NET Framework 2.0 Installation After clicking on Install Microsoft .NET Framework 2.0, the Net Framework 2.0 installation 1. wizard will be displayed.Click Next to proceed with the installation. 2. Check the Agreement acceptance box then press Install to start the installation. When th...

27 Chapter 4: Configuration Accessing BiPAC HomePlug AV 200 Utility Once the BiPAC HomePlug AV 200 Utility Setup Wizard is installed, a shortcut will appear on the desktop. You can start the BiPAC HomePlug AV Utility by double clicking on the shortcut, or go through “start”→ “All Program”→ “BiPAC Ho...

28 BiPAC HomePlug AV Utility Billion BiPAC HomePlug AV Utility consists of 6 screens accessed through 6 panel tabs. The 6 panels are Main, Privacy, Diagnostics, QoS, Firmware Download and About located on the top left corner of the program for configuration convenience. Main Tab The Main Tab screen ...

32 Privacy Tab Privacy Tab allows user the convenience to manage the security of the private powerline network. In addition, user can also uitlize this feature to add a new HomePlug device to the private network instead of manually adding the device using its sync button. In order to add devices to ...

33 Diagnostic Tab The Diagnostics Tab screen shows System information and a history of all remote devices seen over a period of time. This screen is available for OEM/ODM Customization. The Upper panel shows technical data concerning software and hardware present on the host computer which were used...

35 QoS Tab This function allows user the flexibility to manage the bandwidth usage for each HomePlug device. The higher the QoS priority the more bandwidth usage is allocated to that particular device. To set the QoS priority of each device: Click to select the device that you want to set its QoS pr...

Firmware Download Tab This function gives users the convenience to download the free bundled Firmware Upgrade tool from Billion website. Thus, with this feature, users can always keep their PLC Utility updated with the latest firmware. To Download the Free Bundled Firmware Upgrade Tool Click on the ...

About Tab The About screen shows the software version. Under the Preferences panel, user can check the AutoScan box to turn on the Auto Scan function or check off the box to turn off the Auto Scan function. 37

43 Chapter 5: Troubleshooting If your router is not functioning properly, please refer to the suggested solutions provided in this chapter. If your problems persist or the suggested solutions do not meet your needs, please kindly contact your service provider or Billion for support. Problems with th...