Page 2 - FCC Certifications; Federal Communication Commission Interference Statement
1 FCC Certifications Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference ...
Page 3 - CE Mark Warning
2 CE Mark Warning This equipment complies with the requirements relating to electromagnetic compatibility, EN 55022 Class B for ITE, the essential protection requirement of Council Directive 89/336/EEC on the approximation of the laws of the Member States relating to electromagnetic compatibility. C...
Page 4 - TABLE OF CONTENTS; PAC
3 TABLE OF CONTENTS OVERVIEW .................................................... 4 U NPACKING INFORMATION ....................................................... 4 I NTRODUCTION TO THE B I PAC 3013G 54M BPS 802.11 G W IRELESS USB A DAPTER ...............................................................
Page 5 - Over view; Unpacking information; Wireless USB Adapter
4 Over view Thank you for purchasing this product. Read this chapter to know about your BiPAC 3013G 54Mbps 802.11g Wireless USB Adapter. Unpacking information Before getting started, please verify that your package includes the following items: BiPAC 3103G 54Mbps 802.11g Wireless USB Adapter One Dri...
Page 6 - Key Features
5 Key Features Complies with IEEE 802.11b/g wireless standard Support driver for Windows2000, XP 32/64 bit and Vista 32/64 bit Complies with Universal Serial Bus Rev. 1.0, 1.1 and 2.0 specifications. Supports auto-installation and diagnostic utilities. High Speed transfer data rate up to 54 Mbps Sup...
Page 7 - Installation Guide; Software Installation
6 Installation Guide Software Installation Note: The following driver installation guide uses Windows XP as the presumed operation system. The procedures and screens in Windows2000 and Vista are familiar with Windows XP. Insert the CD-Rom that came with this product to your CD-Rom drive. The menu wi...
Page 12 - Management Guide; Making a Basic Network Connection; Before You Start
11 Management Guide Read this chapter to understand the management interface of the device and how to manage the device. Making a Basic Network Connection Before You Start In the following instruction for making a network connection, we use the utility we provided to configure your wireless network ...
Page 14 - Infrastructure mode
13 on the “Network Authentication” drop list to select an authentication method, and then select a “Data encryption” type. Fill in each required blanks and click “OK” . Infrastructure mode An Infrastructure Mode network contains at least one wireless client and one wireless AP or router. This client...
Page 16 - Introduction to the Wireless LAN Utility; Starting the Wireless LAN Utility
15 Note: This example is an open wireless network. If you are going to connect to an AP with security protection, you will have to configure the encryption settings in this profile to be corresponding to your AP. Please click on the “Network Authentication” drop list to select an authentication meth...
Page 18 - Profile
17 Profile The Profile tab lists the preferred connections. You can click the buttons beside to do configure each connection. Add Click this button to add a connection profile for this adapter. Remove To remove a connection profile, click this profile on the profile list and click this button to del...
Page 19 - Available Network
18 Available Network This available tab lists the reachable wireless network of this adapter. Refresh Click this button to rescan available networks around the adapter. Add to Profile To add an available Network to your profile list, select an available network and click this button to add.
Page 20 - Advanced
19 Advanced This Advanced tab provides advanced configurations to this adapter. Every modification in this tab will be performed after clicking the Apply button. To restore the default settings of the advanced tab, click the Set defaults button to perform restoring. Power Save None Disable Power sav...
Page 21 - Status
20 802.11b Preamble Mode Select the preamble mode to be long, short or auto detection mode. Region Domain Select your region from the drop list. Please note that it is necessary for you to select a correct region. Selecting an incorrect region may again the applicable law. WOL Enter the MAC Address ...
Page 22 - Statistics
21 Statistics See this tab to show the transmission activity record. Clicking the “Reset” button recounts the values from zero.
Page 24 - Appendix; Connect to a wireless network in infrastructure mode
23 Appendix RT-Set Setup Wizard For Windows 2000 and XP users to connect to a wireless network easily, we also provide the RT-Set setup wizard to help users set their preferred wireless network step by step. You can configure your wireless network via this RT-Set setup wizard in the following three ...
Page 27 - Connect to a wireless network in ad hoc mode
26 Connect to a wireless network in ad hoc mode 1. To connect this adapter to another computer, select the “Station (ad hoc)” mode and click the “Next” button to proceed. 2. The RT-Set scans the available wireless adapters within your LAN. Those adapters are listed with their SSID. Click the one tha...
Page 30 - Use this adapter as an AP
29 Use this adapter as an AP 1. To use this adapter as an AP (access point), select the “AP” mode and click the “Next” button to proceed. 2. Select “Normal User” (recommend) to make an step-by-step configuration. You may also select “Advanced Users” to configure this AP with more detail.
Page 33 - AP mode management guide
32 AP mode management guide General After configuring the adapter in AP mode, this “ General ” page shows up, which shows the general information of this AP. SSID: The SSID (network name) of the wireless network constructed by this AP. BSSID: The MAC address of this AP Config: Click this button to c...
Page 35 - SoftAP
34 SoftAP This page allows users to select the adapter for connect to public network. Please click on the device that are used for connecting to public network and click the “Select” button, and then click the “Apply” button to execute.
Page 36 - Product Specification
35 Product Specification Standard IEEE 802.11b, IEEE 802.11g Interface USB rev1.0/1.1/2.0 Security 64/128-bit WEP, WPA (TKIP with IEEE 802.1x), AES Receiver Sensitivity 54Mbps OFDM, 10%PER, -68dBm 11Mbps CCK, 8%PER, -86dBm 1Mbps BPSK, 8%PER, -92dBm Channel USA 11, Europe 13 Data Rate 802.11b: 1, 2, ...
