Billion BIPAC 2071 - Manual

Page 2 - Table of Contents; Password Setup Procedure:

Table of Contents Product Introduction ..................................................................................... 3 Features & Specifications ............................................................................. 3 Getting Started ..................................................

Page 5 - Getting Started; Safety Warnings; Features - HomePlug AV 200 Ethernet Bridge

Getting Started Safety Warnings 1. Do not use the adapter in high humidity or high temperature environment. 2. Do not open or repair the case yourself. 3. Avoid using this product and all its accesories outdoor. 4. Place the adapter on a stable surface. 5. Only “HomePlug AV” compliant Powerline Comm...

Page 6 - Hardware Overview; Lit when the device is power on.

Hardware Overview BiPAC 2071 BiPAC 2072 Ethernet Port Power Plug AC Outlet / AC Pass-thru (only available in BiPAC 2072 model) Reset Button Sync Button ETH LED 1.0 DET LED Power LED PLC LED The Description of each labeled part is described in the table below. AC Outlet / AC Pass-thru (only available...

Page 8 - Sync Button Function:; A BiPAC 2071 / 2072 device can provide information for; HomePlug AV 200 Application Scenarios:; Scenario 1: A BiPAC 2071 / 2072 device A wants to form a network group

Sync Button Function: There are 3 types of Sync Button trigger states: 1. Broadcast State: A BiPAC 2071 / 2072 device can provide information for another BiPAC 2071 or 2072 device to join its powerline network group (works even if it is currently the only device existing within the network group). 2...

Page 10 - Application Illustration; Home / Office Setting

Page 11 - Utility for Easy Installation

BiPAC 2071 (2072) Utility Installation Procedures 1. Place the BiPAC 2071/BiPAC 2072 auto-installation CD into your CD-ROM/DVD-ROM drive and click on Utility for Easy Installation .

Page 13 - Microsoft .NET Framework 2.0 Installation; After clicking on

Microsoft .NET Framework 2.0 Installation 1. After clicking on Install Microsoft .NET Framework 2.0, the Net Framework 2.0 installation wizard will be displayed. 2. Click to proceed with the installation.

Page 18 - to confirm and start the installation.

3. Press to confirm and start the installation. 4. Wait until the installation process is complete then press to complete the utility setup.

Page 19 - start

Starting BiPAC 2071 (2072) Utility Once the BiPAC 2071 (2072) Utility Setup Wizard is installed, a shortcut will appear on the desktop. You can start the BiPAC 2071 (2072) Utility by double clicking on the shortcut, or go through “ start ” → “ All Program ” → “ BiPAC 2071 (2072) Utility ” → “ BiPAC ...

Page 20 - Main Tab

Understanding BiPAC 2071 (2072) Utility Billion BiPAC 2071 (2072) Utility consists of 4 screens accessed through 4 panel tabs. The 4 panels are Main , Privacy, Diagnostics and About located on the top left corner of the program for configuration convenience. Main Tab The Main Tab Screen lists all th...

Page 21 - lower panel; displays all the HomePlug remote devices, detected on the current; Device Name; Display the data transmission rate of each device.; MAC Address; Show the Remote device MAC address.

message ‘NO HOMEPLUG ADAPTERS DETECTED’. The lower panel displays all the HomePlug remote devices, detected on the current network. The total number of remote devices connected on the same network can be found on top of the Remote device panel. The Network type (Public or Private) is also displayed ...

Page 22 - button at the bottom of the lower panel to call up the; Set; Then type in the password in the blank provided and press; Note

Password Setup Procedure: 1. To assign a password to a specific device, select the device and click on the Enter Password button at the bottom of the lower panel to call up the Set Device Password dialog box. 2. Then type in the password in the blank provided and press OK. Note : The Password field ...

Page 23 - Add New HomePlug Device to a Powerline Network; Press the; Add; When a; Add Device to Network; dialog box pops up, enter the name and the; OK

Add New HomePlug Device to a Powerline Network Additionally, when there is more than one powerline network present, a new HomePlug device can be added to any specific powerline network as desired. To add a new device to a network: 1. Press the Add button. 2. When a Add Device to Network dialog box p...

Page 24 - Privacy Tab; network type on the main screen as Private.; Set Local Device Only; button can be used to change the network name (network

Privacy Tab Privacy Tab is to allow user the convenience to manage the security of the private powerline network and to enable the adding of new HomePlug device to the private network. All HomePlug devices are shipped using a default logical network name “HomePlugAv”. The Privacy tab screen allows u...

Page 25 - Set All Devices

network, rendering the local device unable to communicate with other devices in its previous network. Set All Devices button is used to change the logical network of all devices that appear on the Main tab screen whose Device Password had been entered for the same logical network. A dialog window wi...

Page 26 - The; Diagnostics Tab; screen shows System information and a history of all remote; Upper panel

Diagnostics Tab The Diagnostics Tab screen shows System information and a history of all remote devices seen over a period of time. This screen is available for OEM/ODM Customization. The Upper panel shows technical data concerning software and hardware present on the host computer which were used f...

Page 27 - Lower panel

The Lower panel contains a history of all remote devices seen on the computer over a certain period of time. All devices that were on the powerline network are listed here along with a few other parameters. Devices that are active on the current logical network will show a transfer rate in the Rate ...

Page 28 - About Tab; About; panel, user can check the AutoScan box to turn on the Auto

About Tab The About screen shows the software version and provides the HTML link to the Billion official website. Clicking on the web address field will open a web browser that link directly to the web site. Under the Preferences panel, user can check the AutoScan box to turn on the Auto Scan functi...

Page 29 - Troubleshooting; My Homeplug device is unable to detect my other HomePlug device.; HomePlug AV Utility; and select the; Privacy; Tab. Enter the password; Repeat the same procedure to the other

Troubleshooting Problem: My Homeplug device is unable to detect my other HomePlug device. Solution: This may due to the accidental change of the device password. Access the HomePlug AV Utility and select the Privacy Tab. Enter the password “ HomePlugA V ” (Case Sensitive) in the blank provided. Then...

Billion BIPAC 2071 - Manual

Table of Contents:

Summary

Other Billion Models