Billion BIPAC-710C2 - Manuals

Page 3 - Package Contents

Billion BIPAC – 711C2 / 710C2 – ADSL Modem / Router 1 Package Contents BIPAC-711C2 / 710C2 ADSL Router CD-ROM containing the online manual RJ-11 ADSL/telephone Cable Ethernet (CAT-5 LAN) Cable One USB cable (for 711C2 only) AC-DC power adapter (12VDC, 1A) This Quick Start Guide Do not use the BIPAC-...

Page 4 - The Front LEDs; LED

Quick Start Guide 2 The Front LEDs 5 3 1 7 4 2 LED Meaning 1 PWR Lit green when power adapter is connected. 2 SYS When lit, it indicates that the device is working properly. 3 USB When this LED is lit, it indicates that the USB port is connected to the PC and working properly. 4 LNK Lit green when t...

Page 5 - The Rear Ports; Port

Billion BIPAC – 711C2 / 710C2 – ADSL Modem / Router 3 The Rear Ports 6 4 3 1 5 2 Port Meaning 1 Power Switch Power ON/OFF switch 2 PWR Connect the supplied power adapter to this jack. 3 LAN (RJ-45 connector) Connect the supplied crossover cable to this port when connecting to a NIC (Network Interfac...

Page 6 - Connecting Your ADSL Modem/Router; Through USB Port

Quick Start Guide 4 Connecting Your ADSL Modem/Router Through Ethernet Port 1. Connect the Router to a LAN (Local Area Network) and the ADSL/telephone ( LINE ) network. 2. Power on the device. 3. Make sure the PWR , SYS and LAN LEDs are lit steadily 4. Follow the “Configuring the Network Properties ...

Page 7 - Installing the USB Driver on a PC

Billion BIPAC – 711C2 / 710C2 – ADSL Modem / Router 5 Installing the USB Driver on a PC (for BIPAC-711C2 only) If you connect the device through USB port instead of Ethernet port, for the first time the USB cable is connected to the PC, Windows will automatically detect the device. Follow the steps ...

Page 11 - Configuring PC in Windows 2000

Billion BIPAC-711C2/710C2 ADSL Modem / Router 9 Configuring PC in Windows 2000 1. Go to Start / Settings / Control Panel . In the Control Panel, double-click on Network and Dial-up Connections . 2. Double-click Local Area Connection . 3. In the Local Area Connection Status window click Properties . ...

Page 12 - Configuring PC in Windows 98/Me

Quick Start Guide 10 Configuring PC in Windows 98/Me 1. Go to Start / Settings / Control Panel . In the Control Panel, double-click on Network and choose the Configuration tab. 2. Select TCP/IP -> NE2000 Compatible , or the name of your Network Interface Card (NIC) in your PC. 3. Select the Obtai...

Page 13 - Configuring PC in Windows NT4.0

Billion BIPAC-711C2/710C2 ADSL Modem / Router 11 Configuring PC in Windows NT4.0 1. Go to Start / Settings / Control Panel . In the Control Panel, double-click on Network and choose the Protocols tab. 2. Select TCP/IP Protocol and click Properties . 3. Select the Obtain an IP address from a DHCP ser...

Page 14 - Configuring Your ADSL Modem/Router; Verifying Your Local Network Connection with the Device

Quick Start Guide 12 Configuring Your ADSL Modem/Router Verifying Your Local Network Connection with the Device To see if this ADSL Router is visible on the local network, go to Start / Run . In the Run dialog box, type “ping 192.168.1.254” then press OK . A command prompt window will pop out. If yo...

Page 15 - Connecting to the Router; Product Support and Contact Information

Billion BIPAC-711C2/710C2 ADSL Modem / Router 13 Connecting to the Router Open the web browser and type http://192.168.1.254 in the browser’s address box. This number is the default IP address for this router. Press Enter . A user name and password window will appear. The default User Name and Passw...