Billion BIPAC-5100S - Manuals

Page 3 - Package Contents

Billion BIPAC-5100S ADSL Modem/Router 1 Package Contents BIPAC-5100S ADSL Modem/Router CD-ROM containing the online manual RJ-11 ADSL/telephone Cable Ethernet (CAT-5 LAN) Cable AC-AC power adapter (9VAC, 1A) This Quick Start Guide Do not use the BIPAC-5100S in high humidity or hightemperatures. Do n...

Page 4 - The Front LEDs; LED

Quick Start Guide 2 The Front LEDs LED Meaning 1 PPP : Lit steady when there is a PPPoA / PPPoE connection. 2 ADSL: Lit when successfully connected to an ADSL DSLAM (“linesync”). 3 LAN Port : Lit when connected to an Ethernet device. Green for 100Mbps; Orange for 10Mbps. Blinking when data is Transm...

Page 5 - The Rear Ports; Port

Billion BIPAC-5100S ADSL Modem/Router 3 The Rear Ports Port Meaning 1 POWER Connect the supplied power adapter to this jack. 2 RESET After the device is powered on, press it to reset the device or restore to factory default settings. 0-3 seconds : reset the device 6 seconds above : restore to factor...

Page 6 - Connecting Your ADSL Router

Quick Start Guide 4 Connecting Your ADSL Router 1. Connect the Router to a LAN (Local Area Network) and the ADSL/telephone ( LINE ) network. 2. Power on the device. 3. Make sure the PWR and SYS LEDs are lit steadily and that the relevant LAN LED is lit.

Page 7 - Configuring PC in Windows XP

Billion BIPAC-5100S ADSL Modem/Router 5 Configuring PC in Windows XP 1. Go to Start / Control Panel (in Classic View) . In the Control Panel, double-click on Network Connections 2. Double-click Local Area Connection . 3. In the Local Area Connection Status window, click Properties . 4. Select Intern...

Page 8 - Configuring PC in Windows 2000

Quick Start Guide 6 Configuring PC in Windows 2000 1. Go to Start / Settings / Control Panel . In the Control Panel, double-click on Network and Dial-up Connections . 2. Double-click Local Area Connection . 3. In the Local Area Connection Status window click Properties . 4. Select Internet Protocol ...

Page 10 - Configuring PC in Windows NT4.0

Quick Start Guide 8 Configuring PC in Windows NT4.0 1. Go to Start / Settings / Control Panel . In the Control Panel, double-click on Network and choose the Protocols tab. 2. Select TCP/IP Protocol and click Properties . 3. Select the Obtain an IP address from a DHCP server radio button and click OK...

Page 11 - Configuring Your ADSL Modem/Router

Billion BIPAC-5100S ADSL Modem/Router 9 Configuring Your ADSL Modem/Router 1. Open the web browser and type http://192.168.1.254 in the browser’s address box. This number is the default IP address for this router. Press Enter . 2. A username and password window will appear. The default username and ...

Page 12 - Verifying Your Local Network Connection with the Device; Product Support and Contact Information

Quick Start Guide 10 Verifying Your Local Network Connection with the Device To see if this ADSL Router is visible on the local network, go to Start / Run . In the Run dialog box, type “ping 192.168.1.254” then press OK . A command prompt window will pop out. If your ping is successful which means y...