Billion 7500GL - Manuals

myGuard 7500GL 802.11g Security ADSL Router Chapter 1: Introduction Allows user to make a tunnel with a remote site directly to secure the data transmission among the connection. User can use embedded PPTP and L2TP client/server, IKE and IPSec which are supported by this router to make a VPN connect...

myGuard 7500GL 802.11g Security ADSL Router Chapter 1: Introduction myGuard 7500GL Application myGuard 7500GL 802.11g Security ADSL Router Figure 1.1 Application Diagram of myGuard 7500GL 802.11g Security ADSL Router Thank you for your purchase, and welcome to the world of broadband Internet! 4

myGuard 7500GL 802.11g Security ADSL Router Chapter 2: Installing the Router Chapter 2: Installing the Router Important note for using the myGuard 7500GL Warning Do not use the myGuard 7500GL in high humidity or hightemperatures. Do not use the same power source for the myGuard 7500GL asother equipm...

myGuard 7500GL 802.11g Security ADSL Router Chapter 2: Installing the Router The Front LEDs LED Meaning 1 PWR Lit when power is ON. 2 SYS Lit when the system is ready. 3 LAN port 1 Lit when connected to an Ethernet device. Green for 100Mbps; Orange for 10Mbps Blinking when data is transmitted/receiv...

myGuard 7500GL 802.11g Security ADSL Router Chapter 2: Installing the Router The Rear Ports 6 5 4 3 2 1 Port Meaning 1 LINE Connect the supplied RJ-11 (“telephone”) cable to this port when connecting to the ADSL/telephone network. 2 CONSOLE Connect a PS2/RS-232 cable to this port when connecting to ...

myGuard 7500GL 802.11g Security ADSL Router Chapter 2: Installing the Router Cabling One of the most common causes of problems is bad cabling or ADSL line(s). Make sure that all connected devices are turned on. On the front of the product is a bank of LEDs. Verify that the LAN Link and ADSL line LED...

myGuard 7500GL 802.11g Security ADSL Router Chapter 3: Basic Installation 9 Chapter 3: Basic Installation The router can be configured with your web browser. A web browser is included as a standard application in the following operating systems: Linux, Mac OS, Windows 98/NT/2000/XP/Me, etc. The prod...

myGuard 7500GL 802.11g Security ADSL Router Chapter 3: Basic Installation 10 Configuring PCs in Windows For Windows XP 1. Go to Start / Control Panel (in Classic View). In the Control Panel, double-click Network Connections . 2. Double-click Local Area Connection . (See Figure 3.1) 3. In the LAN Are...

myGuard 7500GL 802.11g Security ADSL Router Chapter 3: Basic Installation 14 Activating Trend Micro Security Services Before you can take full advantage of Trend Micro Security Services, you need to activate them. Available Services Before Activation After Activation Security Scan Vulnerability repo...

myGuard 7500GL 802.11g Security ADSL Router Chapter 3: Basic Installation 15 Factory Default Settings Before configuring your, you need to know the following default settings. Web Interface: Username: admin Password: admin LAN Device IP Settings: IP Address: 192.168.1.254 Subnet Mask: 255.255.255.0 ...

myGuard 7500GL 802.11g Security ADSL Router Chapter 3: Basic Installation 16 Information from your ISP Before configuring this device, you have to check with your ISP (Internet Service Provider) what kind of service is provided such as PPPoE, PPPoA, RFC1483, or IPoA. Gather the information as illust...

myGuard 7500GL 802.11g Security ADSL Router Chapter 3: Basic Installation 17 Configuring with your Web Browser Open your web browser, enter the IP address of your router, which by default is 192.168.1.254 , and click “ Go ”, a user name and password window prompt will appear. The default username an...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4:Configuration Chapter 4: Configuration At the configuration homepage, the left navigation pane where bookmarks are provided links you directly to the desired setup page, including: Status (ARP Table, Wireless Association, Routing Table, DHCP Tabl...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4: Configuration Status ARP Table This section displays the router’s ARP (Address Resolution Protocol) Table, which shows the mapping of Internet (IP) addresses to Ethernet (MAC) addresses. This is useful as a quick way of determining the MAC addre...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4: Configuration Wireless Association IP Address: It is IP address of wireless client that joins this network. MAC: The MAC address of wireless client. 20

myGuard 7500GL 802.11g Security ADSL Router Chapter 4: Configuration Routing Table Routing Table: Valid: It indicates a successful routing status. Destination: The IP address of the destination network. Netmask: The destination netmask address. Gateway/Interface: The IP address of the gateway or exi...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4: Configuration DHCP Table Leased: The DHCP assigned IP addresses information. IP Address: A list of IP addresses of devices on your LAN (Local Area Network). Expired: The expired IP addresses information. Permanent: The fixed host mapping informa...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4: Configuration PPTP Status This shows details of your configured PPTP VPN Connections. Name: The name you assigned to the particular PPTP connection in your VPN configuration. Type: The type of connection (dial-in/dial-out). Enable: Whether the c...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4: Configuration IPSec Status This shows details of your configured IPSec VPN Connections. Name: The name you assigned to the particular VPN entry. Active: Whether the VPN Connection is currently Active. Connection State: Whether the VPN is Connect...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4: Configuration L2TP Status This shows details of your configured L2TP VPN Connections. Name: The name you assigned to the particular L2TP connection in your VPN configuration. Type: The type of connection (dial-in/dial-out). Enable: Whether the c...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4: Configuration Event Log This page displays the router’s Event Log entries. Major events are logged to this window, such as when the router’s ADSL connection is disconnected, as well as Firewall events when you have enabled Intrusion or Blocking ...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4:Configuration NAT Sessions This section lists all current NAT sessions between interface of types external (WAN) and internal (LAN). UPnP Portmap The section lists all port-mapping established using UPnP (Universal Plug and Play). Please see the ...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4: Configuration Quick Start For detailed instructions on configuring your WAN settings, please see the WAN section of this manual. Usually, the only details you will need for the Quick Start wizard to get you online are your login (often in the fo...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4: Configuration Click Start to begin scanning for encapsulation types offered by your ISP. If the scan is successful you will then be presented with a list of supported options: Select the desired option from the list and click Apply to return to ...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4: Configuration Configuration When you click this item, you get following sub-items to configure the ADSL router. LAN, WAN, System, Firewall, VPN, QoS, Virtual Server and Advanced These functions are described below in the following sections. LAN ...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4: Configuration Wireless WLAN Service: Default setting is set to Enable. Mode: 802.11b + g (Mixed mode), 802.11b and 802.11g. The factory default is 802.11b + g. ESSID: Enter the unique ID given to the Access Point (AP), which is already built-in ...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4: Configuration Wireless Security You can disable or enable with WPA or WEP for protecting wireless network. The default mode of wireless security is disabled . WPA Pre-Shared Key WPA Algorithms: TKIP (Temporal Key Integrity Protocol) utilizes a s...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4: Configuration WEP WEP Encryption: To prevent unauthorized wireless stations from accessing data transmitted over the network, the router offers highly secure data encryption, known as WEP. If you require high security for transmissions, there ar...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4:Configuration Port Setting This section allows you to configure the settings for the router’s Ethernet ports to solve some of the compatibility problems that may be encountered while connecting to the Internet, as well allowing users to tweak the...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4: Configuration DHCP Server You can disable or enable the DHCP (Dynamic Host Configuration Protocol) server or enable the router’s DHCP relay functions. The DHCP protocol allows your router to dynamically assign IP addresses to PCs on your network...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4: Configuration If you check DHCP Relay Agent and click Next , then you will have to enter the IP address of the DHCP server which will assign an IP address back to the DHCP client in the LAN. Use this function only if advised to do so by your net...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4:Configuration WAN (Wide Area Network) WAN refers to your Wide Area Network connection, i.e. your router’s connection to your ISP and the Internet. There are two items within the WAN section: ISP , DNS and ADSL . ISP The factory default is PPPoE. ...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4:Configuration RFC 1483 Routed Connections Description: Your description of this connection. VPI and VCI: Enter the information provided by your ISP. ATM Class: The Quality of Service for ATM layer. NAT: The NAT (Network Address Translation) featu...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4:Configuration DHCP client function, and specify the IP address manually. The setting of this item is specified by your ISP. Authentication Protocol: Default is Chap(Auto ). Your ISP will advise you whether to use Chap or Pap. Connection: Always o...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4:Configuration Give DNSto Relay: Controls whether the PPP Internet Protocol Control Protocol (IPCP) can request the DNS server IP address for a remote PPP peer. Once IPCP has discovered the DNS server IP address, it automatically gives the address...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4:Configuration RFC 1483 Bridged Connections VPI and VCI: Enter the information provided by your ISP. ATM Class: The Quality of Service for ATM layer. Encapsulation method: Select the encapsulation format, this is provided by your ISP. Ether Filter...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4:Configuration PPPoA Routed Connections Description: User-definable name for the connection. VPI/VCI: Enter the information provided by your ISP. ATM Class: The Quality of Service for ATM layer. NAT: The NAT (Network Address Translation) feature a...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4:Configuration IPoA Routed Connections Description: User-definable name for the connection. VPI/VCI: Enter the information provided by your ISP. ATM Class: The Quality of Service for ATM layer. NAT: The NAT (Network Address Translation) feature al...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4:Configuration DNS A Domain Name System (DNS) contains a mapping table for domain name and IP addresses. On the Internet, every host has a unique and user-friendly name (domain name) such as www.billion.com and an IP address. An IP address is a 32...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4:Configuration ADSL Connect Mode: The default is Multimode; it will detect the ADSL line code, G.dmt, G.lite, and T1.413 automatically. But in some area, it cannot detect the ADSL line code well. At this time, please adjust the ADSL line code to G...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4:Configuration System There are six items within the System section: Time Zone, Remote Access, Firmware Upgrade, Backup/Restore, Restart and User Management. Time Zone The router does not have a real time clock on board; instead, it uses the Simpl...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4:Configuration Remote Access To temporarily permit remote administration of the router (i.e. from outside your LAN), select a time period the router will permit remote access for and click Enable. You may change other configuration options for the...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4:Configuration Firmware Upgrade Your router’s “firmware” is the software that allows it to operate and provides all its functionality. Think of your router as a dedicated computer, and the firmware as the software it runs. Over time this software ...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4:Configuration Backup / Restore These functions allow you to save and backup your router’s current settings to a file on your PC, or to restore a previously saved backup. This is useful if you wish to experiment with different settings, knowing th...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4:Configuration Restart Router Click Restart with option Current Settings to reboot your router (and restore your last saved configuration). If you wish to restart the router using the factory default settings (for example, after a firmware upgrade...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4:Configuration User Management In order to prevent unauthorized access to your router’s configuration interface, it requires all users to login with a password. You can set up multiple user accounts, each with their own password. You are able to E...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4:Configuration Firewall and Access Control Your router includes a full SPI (Stateful Packet Inspection) firewall for controlling Internet access from your LAN, as well as helping to prevent attacks from hackers. In addition to this, when using NAT...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4:Configuration Firewall Security and Policy (General Settings) : Outbound direction of Packet Filter rules to prevent unauthorized computers or applications accessing the Internet. MAC Filter rules : To prevent unauthorized computers accessing the...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4:Configuration 57 Any remote user who is attempting to perform this action may result inblocking all the accesses to configure and manage of the device from theInternet. Packet Filter

myGuard 7500GL 802.11g Security ADSL Router Chapter 4:Configuration Port Filters The pre-defined port filter rules for High, Medium and Low security levels are listed. See Table 1. Table 1: Pre-defined Port Filter Port Number Firewall - High Firewall - Medium Firewall - Low Application Protocol Star...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4:Configuration Address Filters Address Filters are used to block traffic to/from particular IP addresses. They can be used to block IP addresses either on the Internet or on your local network. There are no pre-defined address filter rules; you ca...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4:Configuration Example: Configuring your firewall to allow for a publicly accessible web server on your LAN The pre-defined port filter rule for HTTP (TCP port 80) is the same no matter whether the firewall is set to a high, medium or low security...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4:Configuration 2. Click Port Filters . You will then be presented with the pre-defined port filter rules screen (in this case for the low security level), shown below: Click Delete 3. Click Delete to delete the existing HTTP rule. 4. Click Add TCP...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4:Configuration 7. Configure your Virtual Server (“port forwarding”) settings so that incoming HTTP requests on port 80 will be forwarded to the PC running your web server: To enable the HTTP service in Virtual Server settings, input the web server...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4:Configuration Intrusion Detection The router’s Intrusion Detection System (IDS) is used to detect hacker attacks and intrusion attempts from the Internet. If the IDS function of the firewall is enabled, inbound packets are filtered and blocked de...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4:Configuration Max PING Count : This is a threshold value to decide whether an ICMP Echo Storm is occurring or not. Default value is 15 ICMP Echo Requests (PING) per second. Max ICMP Count : This is a threshold to decide whether an ICMP flood is o...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4:Configuration MAC Address Filter A MAC (Media Access Control) address is the unique network hardware identifier for each PC on your network’s interface (i.e. its Network Interface Card or Ethernet card). Using your router’s MAC Address Filter fun...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4:Configuration URL Content Filtering URL (Uniform Resource Locator – e.g. an address in the form of http://www.abcde.com or http://www.example.com ) filter rules allow you to prevent users on your network from accessing particular websites by thei...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4:Configuration Domains Filtering: This function checks the domain name in URLs accessed against your list of domains to block or allow. If it is matched, the URL request will be sent (Trusted) or dropped (Forbidden). The checking procedure is: 1. ...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4:Configuration Firewall Log Firewall Log display log information of any unexpected action with your firewall settings. Check the Enable box to activate the logs. Log information can be seen in the Status – Event Log after enabling. 68

myGuard 7500GL 802.11g Security ADSL Router Chapter 4:Configuration VPN (Virtual Private Networks) Your router support three main types of VPN (Virtual Private Network), PPTP , IPSec and L2TP , and these are the two major section choices from the menu on the left. PPTP There are two types of PPTP VP...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4:Configuration Remote Access PPTP Connection Connection Name: This allows you to identify this particular connection, e.g. “Connection to office”. Type: Check Dial Out if you want your router to operate as a client (connecting to a remote VPN serv...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4:Configuration Mode: You may select Stateful or Stateless mode. The key will be changed every 256 packets when you select Stateful mode. If you select Stateless mode, the key will be changed in each packet. Idle Time : Auto-disconnect the VPN conn...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4:Configuration LAN to LAN PPTP Connection Connection Name: A user-define description of the connection. Type: Check Dial Out if you want your router to operate as a client (connecting to a remote VPN server, e.g. your office server), check Dial In...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4:Configuration IPSec Click Create to configure a new IPSec VPN connection. 74

myGuard 7500GL 802.11g Security ADSL Router Chapter 4:Configuration Configure a new VPN Connection Connection Name: A user-defined name for the connection (e.g. “connection to office”). Local: Local Network: Set the IP address, subnet or address range of the local network. Single Address: The IP add...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4:Configuration Advanced Option Click Advanced Option to change the following settings: IKE Mode: Select IKE mode to Main mode or Aggressive mode. Local ID: Type: Specify local ID type. Content: Input ID’s information, like domain name www.ipsectes...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4:Configuration L2TP There are two types of L2TP VPN supported, Remote Access and LAN-to-LAN (please refer below for more information.). Click Create to configure a new VPN connection. 78

myGuard 7500GL 802.11g Security ADSL Router Chapter 4:Configuration Remote Access L2TP Connection Connection Name: This allows you to identify this particular connection, e.g. “Connection to office”. Type: Check Dial Out if you want your router to operate as a client (connecting to a remote VPN serv...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4:Configuration Authentication: Authentication establishes the integrity of the datagram and ensures it is not tampered with in transmit. There are three options, Message Digest 5 ( MD5 ), Secure Hash Algorithm ( SHA-1 ) or NONE . SHA-1 is more res...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4:Configuration LAN to LAN L2TP Connection Connection Name: A user-define description of the connection. Type: Check Dial Out if you want your router to operate as a client (connecting to a remote VPN server, e.g. your office server), check Dial In...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4:Configuration Example: Configuring a Remote Access PPTP VPN Dial-in Connection A remote worker establishes a PPTP VPN connection with the head office using Microsoft's VPN Adapter (included with Windows 2000/ME, etc.). The router is installed in ...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4:Configuration Configuring PPTP VPN in the Office The input IP address 192.168.1.200 will be assigned to the remote worker. Please make sure this IP is not used in the Office LAN. 1 2 3 4 5 Item Function Description 1 Connection Name VPN_PPTP Give...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4:Configuration Example: Configuring a Remote Access PPTP VPN Dial-out Connection A company’s office establishes a PPTP VPN connection with a file server located at a separate location. The router is installed in the office, connected to a couple o...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4:Configuration Configuring the PPTP VPN in the Office You can either input the IP address (69.1.121.33 in this case) or hostname to reach the server. 1 2 3 4 5 Item Function Description 1 Connection Name VPN_PPTP Given name of PPTP connection Dial...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4:Configuration Example: Configuring a LAN-to-LAN PPTP VPN Connection The branch office establishes a PPTP VPN tunnel with head office to connect two private networks over the Internet.. The routers are installed in the head office and branch offic...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4:Configuration Configuring PPTP VPN in the Head Office The IP address 192.168.1.201 will be assigned to the router located in the branch office. Please make sure this IP is not used in the head office LAN. 1 2 3 4 5 6 Item Function Description 1 C...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4:Configuration Configuring PPTP VPN in the Branch Office The IP address 69.1.121.30 is the Public IP address of the router located in head office. If you registered the DDNS (please refer to the DDNS section of this manual), you can also use the d...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4:Configuration Example: Configuring a IPSec LAN-to-LAN VPN Connection Table 3: Network Configuration and Security Plan Branch Office Head Office Local Network ID 192.168.0.0/24 192.168.1.0/24 Local Router IP 69.1.121.30 69.1.121.3 Remote Network I...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4:Configuration Configuring IPSec VPN in the Head Office 1 2 3 4 5 Item Function Description 1 Connection Name IPSec_HeadOffice Given a name of IPSec connection Subnet Check Subnet radio button IP Address 192.168.1.0 2 Netmask 255.255.255.0 Head of...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4:Configuration Configuring IPSec VPN in the Branch Office 1 2 3 4 5 Item Function Description 1 Connection Name IPSec_BranchOffice Given a name of IPSec connection Subnet Check Subnet radio button IP Address 192.168.0.0 2 Netmask 255.255.255.0 Bra...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4:Configuration Configuring IPSec VPN in the Office 1 2 3 4 5 Item Function Description 1 Connection Name IPSec Given a name of IPSec connection Subnet Check Subnet radio button IP Address 192.168.1.0 2 Netmask 255.255.255.0 Head office network 3 S...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4:Configuration Example: Configuring a Remote Access L2TP VPN Dial-in Connection A remote worker establishes a L2TP VPN connection with the head office using Microsoft's VPN Adapter (included with Windows XP/2000/ME, etc.). The router is installed ...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4:Configuration Configuring L2TP VPN in the Office The input IP address 192.168.1.200 will be assigned to the remote worker. Please make sure this IP is not used in the Office LAN. 1 2 3 5 6 4 Item Function Description 1 Connection Name VPN_L2TP Gi...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4:Configuration Example: Configuring a Remote Access L2TP VPN Dial-out Connection A company’s office establishes a L2TP VPN connection with a file server located at a separate location. The router is installed in the office, connected to a couple o...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4:Configuration Configuring the L2TP VPN in the Office 1 2 3 5 6 4 Item Function Description 1 Connection Name VPN_L2TP Given name of L2TP connection Dial out Check Dial out 2 Server IP Address (or Hostname) 69.121.1.33 An Dialed server IP Username...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4:Configuration Example: Configuring your Router to Dial-in to the Server Currently, Microsoft Windows operation system does not support L2TP incoming service. Additional software may be required to set up your L2TP incoming service. 99

myGuard 7500GL 802.11g Security ADSL Router Chapter 4:Configuration Example: Configuring LAN-to-LAN L2TP VPN Connection The branch office establishes a L2TP VPN tunnel with head office to connect two private networks over the Internet. The routers are installed in the head office and branch office a...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4:Configuration Configuring L2TP VPN in the Head Office The IP address 192.168.1.200 will be assigned to the router located in the branch office. Please make sure this IP is not used in the head office LAN. 1 2 3 4 7 6 5 Item Function Description 1...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4:Configuration Configuring L2TP VPN in the Branch Office The IP address 69.1.121.30 is the Public IP address of the router located in head office. If you registered the DDNS (please refer to the DDNS section of this manual), you can also use the d...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4:Configuration QoS (Quality of Service) QoS function helps you to control your network traffic for each application from LAN (Ethernet and/or Wireless) to WAN (Internet). It facilitates you to control the different quality and speed of through put...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4:Configuration Prioritization There are three priority settings to be provided in the modem: High Normal (The default is normal priority for all of traffic without setting). Low The trigger of check can base on IP protocol, port number and address...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4:Configuration IP Throttling IP Throttling allows you to limit the speed of IP traffic. The value entered will limit the speed of the application that you set to the specified value’s multiple of 32kbps. The trigger of check can base on IP protoco...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4: Configuration 161 TCP SNMP 443 TCP & UDP HTTPS 1503 TCP T.120 1720 TCP H.323 4000 TCP ICQ 7070 UDP RealAudio Because NAT can act as a “natural” Internet firewall, your router protects your network from being accessed by outside users when us...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4: Configuration TCP or UDP, however you can specify other protocols using the drop-down Protocol menu. Setting the protocol to “all” will cause all incoming connection attempts using all protocols on all port numbers to be forwarded to the specifi...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4: Configuration Advanced Configuration options within the Advanced section are for users who wish to take advantage of the more advanced features of the router. Users who do not understand the features should not attempt to reconfigure their route...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4: Configuration Dynamic DNS The Dynamic DNS function allows you to alias a dynamic IP address to a static hostname, allowing users whose ISP does not assign them a static IP address to use a domain name. This is especially useful for hosting serve...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4: Configuration Check Emails This function allows you to have the router check your POP3 mailbox for new Email messages. The Mail LED on your router will light when it detects new messages waiting for download. You may also view the status of this...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4: Configuration Device Management The Device Management advanced configuration settings allow you to control your router’s security options and device monitoring features. Embedded Web Server: HTTP Port: This is the port number the router’s embedd...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4: Configuration Universal Plug and Play (UPnP): UPnP offers peer-to-peer network connectivity for PCs and other network devices, along with control and data transfer between devices. UPnP offers many advantages for users running NAT routers throug...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4: Configuration SNMP Version: SNMPv2c and SNMPv3 SNMPv2c is the combination of the enhanced protocol features of SNMPv2 without the SNMPv2 security. The "c" comes from the fact that SNMPv2c uses the SNMPv1 community string paradigm for ...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4: Configuration TMSS Security Services Security Surveying Configuration The period value allows changing for checking latest Scan Engine and Virus Pattern of PC-cillin. Also it can be customized to specify the display interval value (1 day, 3 days...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4: Configuration Parental Controls General Settings Parental Controls intercept requests to view Web sites from a user’s Internet browser and based on specified restricted categories, determines whether to allow or block the requested Web site cont...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4: Configuration Exception List Select Enable to exclude the IP address of user on your LAN from Parental Controls policy. Statistics In addition to blocking Web sites, Parental Controls provide summary information that lets you know how many times...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4: Configuration Getting Started with Trend Micro Security Services To activate your Trend Micro Security Service, you musthave IE 5.5 or above installed After finish the WAN connection setting, the following window will be popped up when opening I...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4: Configuration Depending on your security settings, you may be asked to accept this tool. Click Yes to continue. By default, Internet Explorer permits downloading the ActiveX control, however, if you experience issues downloading it modify your I...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4: Configuration The Trend Micro Security Services dashboard will be shown up, after downloading. You now get 60-day evaluation Security Scan service. Just feeling myGuard Security Services by clicking Scan Now! And it is free of charge for activat...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4: Configuration Downloading… Scanning… 123

myGuard 7500GL 802.11g Security ADSL Router Chapter 4: Configuration Vulnerability report for computer The detail report is generated and shown up to you. Please click Step 2 for seeing detail information of entire Network, for example as following figure. 124

myGuard 7500GL 802.11g Security ADSL Router Chapter 4: Configuration Vulnerability reports for entire Network If you do not like to do security scan now, the Trend Micro Security Services dashboard can be opened by following methods any time when dashboard is closed. • Click the Trend Micro icon but...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4: Configuration Step 1 Do the following: • In the appropriate fields on the Register Web page, type your name and email address and other required information. Registration involves sending an email to the typed address to verify the email address...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4: Configuration Verify the email address and other information is correct. Trend Micro sends a verification email to this address that you must reply to before your services are activated. Click << Back to make any modifications. Click Submi...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4: Configuration Step 2 Validating the Registration Email After submitting your Trend Micro account registration information, Trend Micro will send a validation email to confirm that the email address is correct. To validate your email address: 1. ...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4: Configuration Step 3 Installing Trend Micro Internet Security After validating the email to confirm your Trend Micro account, the final step involves downloading and installing Trend Micro Internet Security. To download and install Trend Micro I...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4: Configuration View Service Summary To view Service Summary: 1. Open the Trend Micro Security Services dashboard. 2. On the dashboard main menu, click Service Summary . View Service Summary to quickly display the following: • Trend Micro Customer...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4: Configuration Using Parental Controls (Subscription base, with 60-day FREE evaluation) Note Parental Controls intercept requests to view Web sites from a user’s Internet browser and based on specified restricted categories, determines whether to...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4: Configuration Statistics of Parental Controls In addition to blocking Web sites, Parental Controls provide summary information that lets you know how many times users on your network. To view statistics of Parental Controls: 1. Open the myGurard...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4: Configuration Save Configuration to Flash After changing the router’s configuration settings, you must save all of the configuration parameters to FLASH to avoid them being lost after turning off or resetting your router. Click Save to write you...

myGuard 7500GL 802.11g Security ADSL Router Chapter 4: Configuration Logout To exit the router’s web interface, choose Logout . Please ensure that you have saved the configuration settings before you logout. Be aware that the router is restricted to only one PC accessing the configuration web pages ...

myGuard 7500GL 802.11g Security ADSL Router Chapter 5: Troubleshooting Chapter 5: Troubleshooting If the router is not functioning properly, first check this chapter for simple troubleshooting before contacting your service provider or Billion support. Problems starting up the router Problem Correct...

myGuard 7500GL 802.11g Security ADSL Router Chapter 5: Troubleshooting Frequent loss of ADSL linesync (disconnections). Ensure that all other devices connected to the same telephone line as your Billion router (e.g. telephones, fax machines, analogue modems) have a line filter connected between them...

myGuard 7500GL 802.11g Security ADSL Router APPENDIX A: Product Support and Contact Information Most problems can be solved by referring to the Troubleshooting section in the User’s Manual . If you cannot resolve the problem with the Troubleshooting chapter, please contact the dealer where you purch...