Billion 7404V Series - Manuals
Billion 7404V Series – Manual in PDF format online.
Manuals:
Manual Billion 7404V Series
Summary
Table of Contents i T T a a b b l l e e o o f f C C o o n n t t e e n n t t s s CHAPTER 1: INTRODUCTION ............................................................................................................. 4 INTRODUCTION TO YOUR ROUTER............................................................
Table of Contents iii WAN - Wide Area Network.................................................................................................................. 41 ISP ........................................................................................................................................
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 1: Introduction 4 Chapter 1: Introduction Introduction to your Router Welcome to the VoIP/(802.11g) ADSL2+ (VPN) Firewall Router. The router is an “all-in-one” VoIP ADSL router, combining an ADSL modem, ADSL router, Ethernet network switch and 2 po...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 1: Introduction 5 directly for auto detection. Multi-Protocol to Establish a Connection It supports PPPoA (RFC 2364 - PPP over ATM Adaptation Layer 5), RFC 1483 encapsulation over ATM (bridged or routed), PPP over Ethernet (RFC 2516), and IPoA (RFC...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 1: Introduction 6 Rich Packet Filtering Not only filters the packet based on IP address, but also based on Port numbers. It will filter packets from and to the Internet, and also provides a higher level of security control. Dynamic Host Configurati...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 2: Installing the router 7 Chapter 2: Installing the Router Important note for using this router Package Contents VoIP/(802.11g) ADSL2+ (VPN) Firewall Router CD-ROM containing the online manual RJ-11 ADSL/telephone Cable Ethernet (CAT-5 LAN) Cable ...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 2: Installing the router 8 The Front LEDs LED Meaning 1 PWR Lit when power is ON. 2 SYS Lit when the system is ready. 3 – 6 LAN Port 1X — 4X (RJ-45 connector) Lit when connected to an Ethernet device. Green for 100Mbps; Orange for 10Mbps. Blinking ...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 2: Installing the router 9 The Ethernet Port # 4 can be used as a console port. You need a special console tool which already includes in the package to connect with LAN port 4 and PC’s RS-232 port (9-pin serial port). The Rear Ports Port Meaning 1...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 2: Installing the router 10 7 ADSL Connect the supplied RJ-11 (“telephone”) cable to this port when connecting to the ADSL/telephone network. 8 Antenna (Wireless Router only) Connect the detachable antenna to this port. Cabling One of the most comm...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 3: Basic Installation 11 Any TCP/IP capable workstation can be used to communicate with or through the router. To configure other types of workstations, please consult the manufacturer’s documentation. Chapter 3: Basic Installation The router can b...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 3: Basic Installation 12 Connecting Your Router 1. Connect this router to a LAN (Local Area Network) and the ADSL/telephone ( ADSL ) network. 2. Power on the device. 3. Make sure the PWR and SYS LEDs are lit steadily and that the LAN LED is lit. 4....
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 3: Basic Installation 13 Configuring PCs in Windows in Window XP 1. Go to Start / Control Panel (in Classic View). In the Control Panel, double-click Network Connections . 2. Double-click Local Area Connection . (See Figure 3.1) 3. In the LAN Area ...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 3: Basic Installation 14 Configuring PCs in Windows 2000 1. Go to Start / Settings / Control Panel . In the Control Panel, double-click Network and Dial-up Connections . 2. Double-click Local Area (“LAN”) Connection . (See Figure 3.5) 3. In the LAN...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 3: Basic Installation 16 Configuring PC in Windows NT4.0 1. Go to Start / Settings / Control Panel . In the Control Panel, double-click Network and choose the Protocols tab. 2. Select TCP/IP Protocol and click Properties . ( See Figure 3.12) 3. Sel...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 3: Basic Installation 17 Factory Default Settings Before configuring your, you need to know the following default settings. Web Interface (Username and Password) Username: admin Password: admin The default username and password are “ admin ” and “ ...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 3: Basic Installation 18 Information from your ISP Before configuring this device, you have to check with your ISP (Internet Service Provider) to find out what kind of service is provided such as DHCP (Obtain an IP Address Automatically, Static IP ...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 3: Basic Installation 19 Configuring with your Web Browser Open your web browser, enter the IP address of your router, which by default is 192.168.1.254 , and click “ Go ”, a user name and password window prompt will appear. The default username an...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 20 Chapter 4: Configuration At the configuration homepage, the left navigation pane where bookmarks are provided links you directly to the desired setup page, including: Status - ARP Table - Wireless Association - Routing Table - D...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 21 Status ARP Table This section displays the router’s ARP (Address Resolution Protocol) Table, which shows the mapping of Internet (IP) addresses to Ethernet (MAC) addresses. This is useful as a quick way of determining the MAC ad...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 22 Gateway/Interface: The IP address of the gateway or existing interface that this route will use. Cost: The number of hops counted as the cost of the route. RIP Routing Table Destination: The IP address of the destination network...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 23 MAC Address: The MAC Address that you want to assign the fixed IP address. Maximum Lease Time: The maximum lease time interval you allow to clients. PPTP Status (Only the 7404VGO has VPN features) This shows details of your conf...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 24 L2TP Status (Only the 7404VGO has VPN features) This shows details of your configured L2TP VPN Connections. Name: The name you assigned to the particular L2TP connection in your VPN configuration. Type: The type of connection (d...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 25 Event Log This page displays the router’s Event Log entries. Major events are logged to this window, such as when the router’s ADSL connection is disconnected, as well as Firewall events when you have enabled Intrusion or Blocki...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 26 NAT Sessions This section lists all current NAT sessions between interface of types external (WAN) and internal (LAN). Diagnostic It tests the connection to computer(s) which is connected to LAN ports and also the WAN Internet c...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 27 UPnP Portmap The section lists all port-mapping established using UPnP (Universal Plug and Play. See Advanced section of this manual for more details on UPnP and the router’s UPnP configuration options.
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 28 Quick Start For detailed instructions on configuring your WAN settings, please see the WAN section of this manual. Usually, the only details you will need for the Quick Start wizard to get you online are your login (often in the...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 29 Select the desired option from the list and click Apply to return to the Quick Start interface to continue configuring your ISP connection. Please note that the contents of this list will vary, depending on what is supported by ...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 30 Configuration When you click this item, you get following sub-items to configure the ADSL router. - LAN, Wan, System, Firewall, VPN, VoIP, QoS, Virtual Server, Time Schedule and Advanced These functions are described below in th...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 32 Ethernet Client Filter The Ethernet Client Filter supports up to 16 Ethernet network machines that helps you to manage your network control to accept traffic from specific authorized machines or can restrict unwanted machine(s) ...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 33 Active PC in LAN displays a list of individual Ethernet device’s IP Address & MAC Address which connecting to the router. You can easily by checking the box next to the IP address to be blocked or allowed. Then, Add to inser...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 34 Wireless (Wireless Router only) Parameters WLAN Service: Default setting is set to Enable . If you do not have any wireless, both 802.11g and 802.11b, device in your network, select Disable. Mode: The default setting is 802.11b+...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 35 TX PowerLevel: It is function that enhances the wireless transmitting signal strength. User may adjust this power level from minimum 0 up to maximum 255. Note: The Power Level maybe different in each access network user premises...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 36 Wireless Security (Wireless Router only) You can disable or enable with WPA or WEP for protecting wireless network. The default mode of wireless security is disabled . WPA-PSK (TKIP) / WPA-PSK (AES) Pre-Shared Key WPA Algorithms...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 37 WEP WEP Encryption: To prevent unauthorized wireless stations from accessing data transmitted over the network, the router offers highly secure data encryption, known as WEP. If you require high security for transmissions, there...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 39 Port Setting This section allows you to configure the settings for the router’s Ethernet ports to solve some of the compatibility problems that may be encountered while connecting to the Internet, as well allowing users to tweak...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 41 WAN - Wide Area Network WAN refers to your Wide Area Network connection, i.e. your router’s connection to your ISP and the Internet. Here are the items within the WAN section: ISP , DNS and ADSL . ISP The factory default is PPPo...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 42 RFC 1483 Routed Connections Description: User-definable name for the connection. VPI and VCI: Enter the information provided by your ISP. ATM Class: The Quality of Service for ATM layer. NAT: The NAT (Network Address Translation...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 43 RFC 1483 Bridged Connections Description: User-definable name for the connection. VPI and VCI: Enter the information provided by your ISP. ATM Class: The Quality of Service for ATM layer. Encapsulation method: Select the encapsu...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 44 PPPoA Routed Connections Description: User-definable name for the connection. VPI/VCI: Enter the information provided by your ISP. ATM Class: The Quality of Service for ATM layer. NAT: The NAT (Network Address Translation) featu...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 45 Detail: You can define the destination port and packet type (TCP/UDP) without checking by timer. It allows you to set which outgoing traffic will not trigger and reset the idle timer. RIP: RIP v1, RIP v2, and RIP v2 Multicast. C...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 46 IPoA Routed Connections Description: User-definable name for the connection. VPI/VCI: Enter the information provided by your ISP. ATM Class: The Quality of Service for ATM layer. NAT: The NAT (Network Address Translation) featur...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 47 PPPoE Connections Description: User-definable name for this connection. VPI/VCI: Enter the information provided by your ISP. ATM Class: The Quality of Service for ATM layer. NAT: The NAT (Network Address Translation) feature all...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 49 PPPoE with Pass-through Connections PPPoE with pass-through adapts the following method: PPPoE Routed mode + 1483 Bridge Mode. With pure PPPoE connection, the router can get one WAN address to the router. With the PPPoE and PPPo...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 51 DNS A Domain Name System (DNS) contains a mapping table for domain name and IP addresses. On the Internet, every host has a unique and user-friendly name (domain name) such as www.helloworld.com and an IP address. An IP address ...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 52 ADSL Connect Mode: This mode will automatically detect your ADSL line code, ADSL2+, ADSL2, G.dmt, G.lite, T1.413, AnnexM2 and AnnexM2+. But in some area, multimode cannot detect the ADSL line code well. If it is the case, please...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 53 Advanced Options ADSL Parameters help to interpret your ADSL line statistics. SNR Margin: It is known as Signal to Noise Ration Margin. It is the relative of DSL strength to Noise ratio. This margin is measured in decibels (dB)....
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 54 System Here are the items within the System section: Time Zone, Remote Access, Firmware Upgrade, Backup/Restore, Restart and User Management. Time Zone The router does not have a real time clock on board; instead, it uses the Si...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 55 Remote Access To temporarily permit remote administration of the router (i.e. from outside your LAN), select a time period the router will permit remote access for and click Enable. You may change other configuration options for...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 56 DO NOT power down the router or interrupt the firmware upgrading whileit is still in process. Improper operation could damage the router. Firmware Upgrade Your router’s “firmware” is the software that allows it to operate and pr...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 58 Restart Router Click Restart with option Current Settings to reboot your router (and restore your last saved configuration). If you wish to restart the router using the factory default settings (for example, after a firmware upg...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 59 User Management In order to prevent unauthorized access to your router’s configuration interface, it requires all users to login with a password. You can set up multiple user accounts, each with their own password. You are able ...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 60 When using Virtual Servers your PCs will be exposed to the degreespecified in your Virtual Server settings provided the ports specified areopened in your firewall packet filter settings. Firewall and Access Control Your router i...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 62 Packet Filter This function is only available when the Firewall is enabled and one of these four security levels is chosen (All blocked, High, Medium and Low). The preset port filter rules in the Packet Filter must modify accord...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 63 Example: Predefined Port Filters Rules The predefined port filter rules for High, Medium and Low security levels are listed. See Table 1. Note: Firewall – All Blocked/User-defined, you must define and create the port filter rule...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 64 MSN (7001) UDP(17) 7001 7001 YES YES N/A N/A N/A N/A MSN VEDIO (9000) TCP(6) 9000 9000 NO YES N/A N/A N/A N/A Inbound: Internet to LAN ; Outbound: LAN to Internet. YES: Allowed ; NO: Blocked ; N/A: Not Applicable
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 65 Packet Filter – Add TCP/UDP Filter Rule Name: Users-define description to identify this entry or click to select existing predefined rules. The maximum name length is 32 characters. Time Schedule: It is self-defined time period....
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 66 Packet Filter – Add Raw IP Filter Rule Name: Users-define description to identify this entry or click to select existing predefined rules. Time Schedule: It is self-defined time period. You may specify a time schedule for your p...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 68 Configuring Packet Filter: 1. Click Port Filters . You will then be presented with the predefined port filter rules screen (in this case for the low security level), shown below: Note: You may click Edit the predefined rule inst...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 69 5. The new port filter rule for HTTP is shown below: 6. Configure your Virtual Server (“port forwarding”) settings so that incoming HTTP requests on port 80 will be forwarded to the PC running your web server: Note: For how to c...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 70 Intrusion Detection The router’s Intrusion Detection System (IDS) is used to detect hacker attacks and intrusion attempts from the Internet. If the IDS function of the firewall is enabled, inbound packets are filtered and blocke...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 71 Table 2: Hacker attack types recognized by the IDS Intrusion Name Detect Parameter Blacklist Type of Block Duration Drop Packet Show Log Ascend Kill Ascend Kill data Src IP DoS Yes Yes WinNuke TCP Port 135, 137~139, Flag: URG Sr...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 72 URL Filter URL (Uniform Resource Locator – e.g. an address in the form of http://www.abcde.com or http://www.example.com ) filter rules allow you to prevent users on your network from accessing particular websites by their URL. ...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 73 dropped. 3. If the packet does not match either of the above two items, it is sent to the remote web server. 4. Please be note that the completed URL, “www” + domain name shall be specified. For example to block traffic to www.g...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 74 IM / P2P Blocking IM, short for Instant Message, is required to use client program software that allows users to communicate, in exchanging text message, with other IM users in real time over the Internet. A P2P application, kno...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 75 Firewall Log Firewall Log display log information of any unexpected action with your firewall settings. Check the Enable box to activate the logs. Log information can be seen in the Status – Event Log after enabling.
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 77 PPTP Connection - Remote Access Connection Name: User-defined name for the connection (e.g. “connection to office”). Type: Check Dial Out if you want your router to operate as a client (connecting to a remote VPN server, e.g. yo...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 78 Example: Configuring a Remote Access PPTP VPN Dial-out Connection A company’s office establishes a PPTP VPN connection with a file server located at a separate location. The router is installed in the office, connected to a coup...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 80 PPTP Connection - LAN to LAN Connection Name: User-define description of the connection. Type: Check Dial Out if you want your router to operate as a client (connecting to a remote VPN server, e.g. your office server), check Dia...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 81 Example: Configuring a PPTP LAN-to-LAN VPN Connection The branch office establishes a PPTP VPN tunnel with head office to connect two private networks over the Internet. The routers are installed in the head office and branch of...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 82 Configuring PPTP VPN in the Head Office The IP address 192.168.1.201 will be assigned to the router located in the branch office. Please make sure this IP is not used in the head office LAN. Item Function Description 1 Connectio...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 85 IPSec VPN Connection Connection Name: User-defined name for the connection (e.g. “connection to office”). Local Network: Set the IP address, subnet or address range of the local network. Single Address: The IP address of the loc...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 86 3DES: Stands for Triple Data Encryption Standard, it uses 168 (56*3) bits as an encryption method. AES: Stands for Advanced Encryption Standards, you can use 128, 192 or 256 bits as encryption method. Perfect Forward Secrecy: Ch...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 88 AES: Stands for Advanced Encryption Standards, you can use 128, 192 or 256 bits as encryption method. Diffie-Hellman Group: It is a public-key cryptography protocol that allows two parties to establish a shared secret over an un...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 89 Example: Configuring a IPSec LAN-to-LAN VPN Connection Table 3: Network Configuration and Security Plan Branch Office Head Office Local Network ID 192.168.0.0/24 192.168.1.0/24 Local Router IP 69.1.121.30 69.1.121.3 Remote Netwo...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 93 Configuring IPSec VPN in the Office Item Function Description 1 Connection Name IPSec Given a name of IPSec connection Subnet Check Subnet radio button IP Address 192.168.1.0 2 Netmask 255.255.255.0 Head office network 3 Secure ...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 95 L2TP Connection - Remote Access L2TP VPN Connection Connection Name: User-defined name for the connection (e.g. “connection to office”). Type: Check Dial Out if you want your router to operate as a client (connecting to a remote...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 96 the VPN tunnel to the Internet; therefore, active the function may degrade the Internet performance. Click Apply after changing settings. L2TP over IPSec (L2TP/IPSec) VPN Connection IPSec: Enable for enhancing your L2TP VPN secu...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 97 Example: Configuring a L2TP VPN - Remote Access Dial-in Connection A remote worker establishes a L2TP VPN connection with the head office using Microsoft's VPN Adapter (included with Windows XP/2000/ME, etc.). The router is inst...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 99 Example: Configuring a Remote Access L2TP VPN Dial-out Connection A company’s office establishes a L2TP VPN connection with a file server located at a separate location. The router is installed in the office, connected to a coup...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 101 Example: Configuring your Router to Dial-in to the Server Currently, Microsoft Windows operation system does not support L2TP incoming service. Additional software may be required to set up your L2TP incoming service.
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 102 L2TP Connection - LAN to LAN L2TP VPN Connection Connection Name: User-define description of the connection. Type: Check Dial Out if you want your router to operate as a client (connecting to a remote VPN server, e.g. your offi...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 104 Example: Configuring L2TP LAN-to-LAN VPN Connection The branch office establishes a L2TP VPN tunnel with head office to connect two private networks over the Internet. The routers are installed in the head office and branch off...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 107 VoIP - Voice over Internet Protocol VoIP enables telephone calls through existing Internet connection instead of going through the PSTN (Public Switched Telephone Network). It is not only cost-effective, especially for a long d...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 108 Wizard This section provides easy setup for your VoIP service. Phone port 1 and 2 can be registered to different SIP Service Provider. Voice QoS DSCP Marking : Differentiated Services Code Point (DSCP), it is the first 6 bits i...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 109 Setting for Phone Port 2 Click box of Same as Phone Port 1 to set phone port 2 be identical as phone port 1. Please refer to descriptions in “Setting for Phone Port 1”. User-defined Profiles Note: User defined profiles are limi...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 110 Confirm Password: Re-enter the password for confirmation. Display Name: This parameter will be appeared on the Caller ID. General Settings This section reflects and contains basic settings for the VoIP module from selected prov...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 112 PSTN Auto-fallback: Whenever VoIP SIP responses error and error code matching with the codes in the Edit section, the VoiP calls will automatically fallback to PSTN. In the other word, the call will be called via the PSTN when ...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 113 Phone Port This section displays status and allows you to edit the account information of your Phones. Click Edit to update your phone information. Login Account Configuration Phone Number: This parameter holds the registration...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 115 PSTN Dial Plan (Router with LINE port only) This section enables you to configure “VoIP with PSTN switching” on your system. You can define a range of dial plans to make regular call from VoIP switching to PSTN line. Prefix num...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 116 PSTN Dial Plan Examples: 1) Dial with Prefix If you dial 01223 707070, number 01223707070 will be dialed out via FXO to make a regular phone call. 2) Dial without Prefix If you dial 9102, the number 102 will only be dialed out ...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 118 VoIP Dial Plan This section helps you to make a telephony number dialed as making a regular call via VoIP. You no longer need to memorize a long dial string of number for making a VoIP call. Parameters A listed of special dial ...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 119 Dial Plan Rules List Click Add to create and define VoIP dial-plan rule(s). Prefix Processing: Prepend xxx unconditionally: xxx number is appended unconditionally to the front of the dialing number when making a call. Prefix ca...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 120 a traditional phone number (PSTN) to an Internet addresses/ SIP URL. The ENUM number must be registered via a public ENUM site or your VoIP Service Provider. <@ SIPgateway>: It is used for the Intelligent Call Routing fea...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 121 Localcheap.com is the default VoIP provider I set on phone port 1. When I call out any number start with 1 or 2 or 3 and plus rest of the phone number for local call, 03 is always prepended in front of these number. If 2 3295 a...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 123 Ring & Tone This section allows advanced user to change the existing or newly defined parameters for the various ring tones (dial tone, busy tone, answer tone and etc.) Country Specific Ring & Tone Region: Select a coun...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 125 QoS - Quality of Service QoS function helps you to control your network traffic for each application from LAN (Ethernet and/or Wireless) to WAN (Internet). It facilitates you to control the different quality and speed of throug...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 126 Source IP Address Range : The source IP address or range of packets to be monitored. Destination IP address Range : The destination IP address or range of packets to be monitored. DSCP Marking : Differentiated Services Code Poi...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 129 Example: QoS for your Network Connection Diagram Information and Settings Upstream: 928 kbps Downstream: 8 Mbps VoIP User : 192.168.1.1 Normal Users : 192.168.1.2~192.168.1.5 Restricted User: 192.168.1.100 0 100 200 300 400 500...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 130 Mission-critical application Mostly the VPN connection is mission-critical application for doing data exchange between head and branch office. The mission-critical application must be sent out smoothly without any dropping. Set...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 132 Virtual Server (known as Port Forwarding) In TCP/IP and UDP networks a port is a 16-bit number used to identify which application program (usually a server) incoming connections should be delivered to. Some ports have numbers t...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 133 Add Virtual Server Because NAT can act as a “natural” Internet firewall, your router protects your network from being accessed by outside users when using NAT, as all incoming connection attempts will point to your router unles...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 134 Example: If you like to remote accessing your Router through the Web/HTTP at all time, you would need to enable port number 80 (Web/HTTP) and map to Router’s IP Address. Then all incoming HTTP requests from you (Remote side) wi...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 138 Example: List of some well-known and registered port numbers. The Internet Assigned Numbers Authority (IANA) is the central coordinator for the assignment of unique parameter values for Internet protocols. Port numbers range fr...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 139 Time Schedule The Time Schedule supports up to 16 time slots which helps you to manage your Internet connection. In each time profile, you may schedule specific day(s) i.e. Monday through Sunday to restrict or allowing the usag...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 140 Configuration of Time Schedule Edit a Time Slot 1. Choose any Time Slot (ID 1 to ID 16) to edit, click Edit. Note: Watch it carefully, the days you have selected will present in capital letter. Lower case letter shows the day(s...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 142 Dynamic DNS The Dynamic DNS function allows you to alias a dynamic IP address to a static hostname, allowing users whose ISP does not assign them a static IP address to use a domain name. This is especially useful for hosting s...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 145 After 100 seconds, the device will automatically logout User A. Universal Plug and Play (UPnP) UPnP offers peer-to-peer network connectivity for PCs and other network devices, along with control and data transfer between device...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 147 IGMP IGMP, known as Internet Group Management Protocol , is used to management hosts from multicast group. IGMP Forwarding: Accepting multicast packet. Default is set to Enable. IGMP Snooping: Allowing switched Ethernet to chec...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 148 VLAN groups need to be created. Ethernet: P1 (Port 1) Ethernet1: P2, P3 and P4 (Port 2, 3, 4) Please uncheck P2, P3, P4 from Ethernet VLAN Port first. Note: You should setup each VLAN group with caution. Each Bridge Interface i...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 150 Step 3: Setup VLAN Service Go to Configuration Advanced VLAN Bridge DefaultVlan lists all member ports. It is necessary to group specific member ports for each VLAN. From the example, two VLAN groups are requested: Data and Vid...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 151 Mapping the VLAN Bridge with Bridge Interface created in Step1, you will see the conformable relationship in these two screenshots. Step 4: IGMP Snooping Enable Go Configuration Advanced IGMP . IGMP Snooping must be enabled in ...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 4: Configuration 152 Logout To exit the router’s web interface, choose Logout . Please ensure that you have saved the configuration settings before you logout. Be aware that the router is restricted to only one PC accessing the configuration web pa...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Chapter 5: Troubleshooting 153 Chapter 5: Troubleshooting If the router is not functioning properly, first check this chapter for simple troubleshooting before contacting your service provider or Billion support. Problems starting up the router Problem Cor...
VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Appendix A: Product Support and Contact Information 154 APPENDIX A: Product Support and Contact Information Most problems can be solved by referring to the Troubleshooting section in the User’s Manual . If you cannot resolve the problem with the Troublesho...
Billion Manuals
-
Billion 2073
Manual
-
Billion Dual-Port ADSL2+ Modem/Router
Manual
-
Billion BiPAC 2073
Manual
-
Billion BiGuard 50G
Manual
-
Billion S100N
Manual
-
Billion 3013G
Manual
-
Billion BIPAC-7100S
Manual
-
Billion BiGuard Series
Manual
-
Billion VoIP/(802.11g) ADSL2+ Router
Manual
-
Billion BIPAC 7500
Manual
-
Billion BIPAC-7100S, BIPAC-7100
Manual
-
Billion BIPAC 3012G
Manual
-
Billion CO1
Manual
-
Billion 3011G
Manual
-
Billion BIPAC-7100
Manual
-
Billion BIPAC-221
Manual
-
Billion 30
Manual
-
Billion ISDN TA128s
Manual
-
Billion BIPAC 2071
Manual
-
Billion 5210S
Manual