Billion 7001 - Manuals

Billion 7001 – Manual in PDF format online.

Manuals:

Manual

Manual Billion 7001

Summary

Page 2 - ii

Chapter 1 ................................................................................................ 1 1.1 Introducing the BiPAC 7001................................................... 1 1.2 Features of the BiPAC 7001 .................................................. 1 1.3 Installing Billion ...

Page 3 - Chapter 1; Introduction the BiPAC 7001; much easier and faster than ever before.

Chapter 1 Introduction the BiPAC 7001 1.1 Introducing the BiPAC 7001 Billion’s BiPAC 7001 complies with ADSL standards and supports downstream rate of up to 8Mbps. With its user-friendly installation utility and plug-and-play USB interface, it can be easily installed on a desktop PC or notebook PC w...

Page 4 - Installing Billion ADSL USB Modem

Page 5 - Chapter 2; Important note for using the BiPAC 7001; Attention; Package Contents

Chapter 2 Installing the BiPAC 7001 2.1 Important note for using the BiPAC 7001 Do not use the BiPAC 7001 in high humidity or high temperatures. Avoid using this product and all accessories outdoors. Place the BiPAC 7001 on a stable surface. 13 . Place the Attention 2.2 Package Contents BiPAC 7001 A...

Page 6 - USB; LED; ADSL

2.3 The Front LEDs 2.4 The Rear Ports Port Meaning 1 USB Connect the supplied USB cable to this port when connecting to the PC 2 LINE Connect the supplied RJ-11 (“telephone”) cable to this port when connecting to the ADSL/telephone network. LED Meaning 1 ADSL : Lit when successfully connected to an ...

Page 7 - Through USB Port; other end to the PC.; Since the product cannot auto-detect whether your cable is

2.5 Cabling Through USB Port The product can be used as a Network Adapter on your PC. That means you do not have to install a network adapter first on your PC before connecting the ADSL Modem/Router. Just connect the supplied USB cable to the USB port of the ADSL USB Modem and connect the other end ...

Page 8 - Chapter 3; Basic Installation; Installing the USB Driver on PC; to do. This section is described based on Windows XP/

Chapter 3 Basic Installation 3.1 Installing the USB Driver on PC 3.1.1 For Windows 1. Insert the CD into your computer’s CD Rom drive. This is the hi-speed modem installation CD, Click “setup. exe” to continue.”. 1. Simply follow the instructions below which outline what you need to do. This section...

Page 9 - Please plug USB cable into ADSL USB Modem.

2. Choose service provider from the list below and then click “Next” to continue. 3. Then click “Next”. 4. Please plug USB cable into ADSL USB Modem. 7

Page 11 - icons on your desktop.

7. After Billion ADSL USB Modem driver is successfully installed, you will see these 2 icons on your desktop. 9

Page 12 - click the driver installer.

3.1.2 For MAC OS 9/X ： 1. Start Windows. Then insert the installation CD into the CD-ROM drive. In next window, click the driver installer. 2. The “Welcome” screen will appear, then, click “Next”. 10

Page 16 - and; Local Area Connection; and click; Properties

3.2 Configuring the Network Properties--- LAN Adapter 3.2.1 Configuring PC in Windows XP 1. Go to Start / Control Panel (in Classic View) . In the Control Panel, double-click on Network Connections, and Double-click Local Area Connection . 2. In the Local Area Connection Status window, click Propert...

Page 17 - DNS Server address as follow.

4. Use the “Internet Protocol (TCP/IP) Properties” window to modify the IP address and DNS Server address as follow. 15

Page 18 - address and typing the address in the space provided.; from the; Local; window will reappear. Click; OK; to end configuring the

Change the IP address to a user defined address by selecting Use the following IP address and typing the address in the space provided. Change the DNS Server address to user defined addresses by selecting Use the following DNS server address and typing the addresses in the spaces provided. The “Adva...

Page 19 - Go to; Network Connections; In the; Local Area Connection Status; window click

3.2.2 Configuring PC in Windows 2000 1. Go to Start / Control Panel (in Classic View) . In the Control Panel, double-click on Network Connections and Double-click Local Area Connection . 2. In the Local Area Connection Status window click Properties . 17

Page 27 - Network; From the; Network and Dial-up Connections; window, right–click the; PPP connection; icon and then click; the phone number field.

3.3 Configuring the Network Properties--- WAN Adapter 3.3.1 Configuring PC in Windows XP 1. Go to Start / Settings / Control Panel . In the Control Panel, double-click on Network and Dial-up Connections . 2. From the Network and Dial-up Connections window, right–click the Billion Dial-up PPP connect...

Page 28 - Networking; tab of the

4. From the Networking tab of the USB ADSL Properties window, select Internet Protocol (TCP/IP) and click Properties 26

Page 30 - Billion Dial-up PPP connection; icon on the desktop. Then, the following window will

6. Billion Dial-up PPP connection icon on the desktop. Then, the following window will appear. Enter the “User name” and “Password” provided by your ISP. 28

Page 41 - Information from your ISP; PPPoE

3.4 Information from your ISP Before configuring this device, you have to check with your ISP (Internet Service Provider) what kind of service is provided such as PPPoE, PPPoA, RFC1483, or IPoA. Gather the information as illustrated in the following table and keep it for reference. PPPoE VPI/VCI, VC...

Page 42 - Chapter 4; Configuration; Accessing communication settings; Start; window will be displayed.

Chapter 4 Configuration 4.1 Accessing communication settings Once the Billion BiPAC 7001 ADSL USB Modem and software have been installed, the communication settings may be easily updated by performing the following steps: 1. From your PC desktop, click Start → Programs → BiPAC-7001 ADSL USB Modem → ...

Page 43 - Next; window will appear, select “Yes, reboot the computer now”, and click “; close; Access to the USB modem’s communication setting is not

Make the necessary changes to the VPI/VCI, Encapsulation type and/or Modulation type and click Next > 3. The system has rebooted to have the new setting take effect, therefore, the “Reboot” window will appear, select “Yes, reboot the computer now”, and click “ close ” to reboot. Access to the USB...

Page 44 - Windows DSL Status Application; DSL Status

4.2 Windows DSL Status Application The Billion ADSL USB Modem control panel program provides a quick and easy way to configure and check the performance of the modem and the ADSL connection. When open, the monitor window updates every 2 seconds. To access the DSL Status Application, the device drive...

Page 45 - Firmware version

screen displays the release number of the ADSL USB Modem driver, and the DSL Status Application version you are currently using. (To show DSL data include Package version , Driver version , Control Panel version and Firmware version ) 43

Page 46 - MAC OS 9.x Control Panel Application; the monitor window updates every 2 seconds.; Apple; icon then select

4.3 MAC OS 9.x Control Panel Application 4.3.1 Control Panel ： The Billion ADSL USB Modem control panel program provides a quick and easy way to configure and check the performance of the modem and the ADSL connection. When open, the monitor window updates every 2 seconds. To access the Control Pane...

Page 48 - Apply

Click Retrain or Disconnect a connection for testing purposes. 3. The “System info” tab provides general information about the various software/firmware version using the same screen as the generally available Control panel previously described. 4. Click on the “Configuration” tab to view and modify...

Page 54 - Click on the “DSL Advanced” tab to view more advanced statistics.

5. The “ATM” tab provides transmission statistics such as the number of cells or packets sent and received, and errors. 6. Click on the “DSL Advanced” tab to view more advanced statistics. 52

Page 56 - Chapter 5; Uninstall; The USB cable should not be unplugged until you are; Yes

Chapter 5 Uninstall Remove the BiPAC 7001 ADSL USB Modem software drivers by performing the following steps. 1. The USB cable should not be unplugged until you are prompted to do so. 2. The USB cable must be unplugged before the system is rebooted. 5.1 Uninstall Windows: 1. From your PC desktop clic...

Page 57 - completed. Then click; Unplug the USB cable from the PC and click; the computer now”, and click; Close

3. You will be reminded into to unplug the USB cable until the uninstall process has been completed. Then click OK > 4. A message will be displayed indicating the software is being removed. 5. Unplug the USB cable from the PC and click OK > 6. The “Reboot” window will appear. Remove all disks ...

Page 59 - uninstall process. Select “Restart now” and click; Finish

5.2 Uninstall MAC OS: 1. Invoke the Uninstaller from the DSL Modem folder (Application -> BiPAC 7001 ADSL USB Modem ->Uninstall) 2. The “Uninstall” screen will appear. Select “Yes, remove the software from my computer” and click Next > 3. Type the administrator name and password at the “Aut...