Billion 5102 - Manuals - manualsarea.com

Page 3 - Package Contents; Warning

Billion BIPAC 5102 / 5102S / 5102G ADSL2+ Modem/Router For more detailed instructions on configuring and using the (802.11g) ADSL Router, please refer to the on-line manual. Package Contents BIPAC 5102 series ADSL2+ Modem/Router CD-ROM containing the on-line manual RJ-11 ADSL/telephone Cable Etherne...

Page 4 - Quick Start Guide; The Front LEDs; LED

Quick Start Guide The Front LEDs BIPAC 5102 BIPAC 5102S BIPAC 5102G LED Meaning 1 PPP : Lit steady when there is a PPPoA / PPPoE connection. 2 ADSL: Lit when successfully connected to an ADSL DSLAM (“linesync”). 3 LAN Port: Lit when connected to an Ethernet device. Green for 100Mbps; Orange for 10Mb...

Page 5 - The Rear Ports; Port; Power Switch; Connect the supplied power adapter to this jack.; RESET; : restore to factory default settings (this is used; LAN

Billion BIPAC 5102 / 5102S / 5102G ADSL2+ Modem/Router The Rear Ports BIPAC 5102 3 3 2 5 4 BIPAC 5102S 4 2 5 3 BIPAC 5102G 5 4 3 2 1 Port Meaning 1 Power Switch Power ON/OFF switch 2 PWR Connect the supplied power adapter to this jack. 3 RESET After the device is powered on, press it to reset the de...

Page 6 - Connect the Router to a; LEDs are lit steadily and that the relevant

Quick Start Guide Connecting BIPAC 5102 1. Connect the Router to a LAN (Local Area Network) and the ADSL/telephone ( LINE ) network. 2. Power on the device. 3. Make sure the PWR and SYS LEDs are lit steadily and that the relevant LAN LED is lit. 4

Page 7 - and; SYS; LEDs are lit steadily and that the; relevant LAN

Billion BIPAC 5102 / 5102S / 5102G ADSL2+ Modem/Router Connecting BIPAC 5102S 1. Connect the Router to a LAN (Local Area Network) and the ADSL/telephone ( LINE ) network. 2. Power on the device. 3. Make sure the PWR and SYS LEDs are lit steadily and that the relevant LAN LED is lit. 5

Page 8 - LED is

Quick Start Guide Connecting BIPAC 5102G 1. Connect the Router to a LAN (Local Area Network) and the ADSL/telephone ( LINE ) network. 2. Power on the device. 6 3. Make sure the PWR, SYS, and WLAN LEDs are lit steadily and that the relevant LAN LED is lit.

Page 9 - Configuring PC in Windows XP

Billion BIPAC 5102 / 5102S / 5102G ADSL2+ Modem/Router Configuring PC in Windows XP 1. Go to Start / Control Panel (in Classic View) . In the Control Panel, double-click on Network Connections 2. Double-click Local Area Connection . 3. In the Local Area Connection Status window, click Properties . 4...

Page 10 - Configuring PC in Windows 2000

Quick Start Guide Configuring PC in Windows 2000 1. Go to Start / Settings / Control Panel . In the Control Panel, double-click on Network and Dial-up Connections . 2. Double-click Local Area Connection . 3. In the Local Area Connection Status window click Properties . 4. Select Internet Protocol (T...

Page 12 - Configuring PC in Windows NT4.0

Quick Start Guide Configuring PC in Windows NT4.0 1. Go to Start / Settings / Control Panel . In the Control Panel, double-click on Network and choose the Protocols tab. 2. Select TCP/IP Protocol and click Properties . 3. Select the Obtain an IP address from a DHCP server radio button and click OK ....

Page 13 - Configuring Your ADSL Firewall Router; Open the web browser and type; Enter; Press; OK; You will get a status report on web page.

Billion BIPAC 5102 / 5102S / 5102G ADSL2+ Modem/Router Configuring Your ADSL Firewall Router To configure this device, you must have IE 5.0 / Netscape 4.5 or above installed 1. Open the web browser and type http://192.168.1.254 in the browser’s address box. This number is the default IP address for ...

Page 14 - Verifying Your Local Network Connection with the Device; Product Support and Contact Information

Quick Start Guide Verifying Your Local Network Connection with the Device To see if this ADSL Router is visible on the local network, go to Start / Run . In the Run dialog box, type “ping 192.168.1.254” then press OK . A command prompt window will pop out. If your ping is successful which means your...