Billion 5100 - Manuals - manualsarea.com

Page 3 - Package Contents

Billion BIPAC-5100 / 5100W ADSL Router 1 Package Contents BIPAC-5100 / 5100W ADSL Router CD-ROM containing the online manual RJ-11 ADSL/telephone Cable Ethernet (CAT-5 LAN) Cable AC-DC power adapter (12VDC, 1A) This Quick Start Guide Do not use the BIPAC-5100 / 5100W in high humidity or hightemperat...

Page 4 - The Front LEDs; LED

Quick Start Guide 2 The Front LEDs LED Meaning 1 PPP : Lit steady when there is a PPPoA / PPPoE connection. 2 ADSL: Lit when successfully connected to an ADSL DSLAM (“linesync”). 3 LAN Port 1-4: Lit when connected to an Ethernet device. Green for 100Mbps; Orange for 10Mbps. Blinking when data is Tra...

Page 5 - The Rear Ports; Port

Billion BIPAC-5100 / 5100W ADSL Router 3 The Rear Ports Port Meaning 1 Power Switch Power ON/OFF switch 2 PWR Connect the supplied power adapter to this jack. 3 RESET After the device is powered on, press it to reset the device or restore to factory default settings. 0-3 seconds : reset the device 6...

Page 6 - Connecting Your ADSL Router

Quick Start Guide 4 Connecting Your ADSL Router 1. Connect the Router to a LAN (Local Area Network) and the ADSL/telephone ( LINE ) network. 2. Power on the device. 3. Make sure the PWR and SYS LEDs are lit steadily and that the relevant LAN LED is lit. ( For 5100W only : the WLAN LED will be lit st...

Page 7 - Configuring PC in Windows XP

Billion BIPAC-5100 / 5100W ADSL Router 5 Configuring PC in Windows XP 1. Go to Start / Control Panel (in Classic View) . In the Control Panel, double-click on Network Connections 2. Double-click Local Area Connection . 3. In the Local Area Connection Status window, click Properties . 4. Select Inter...

Page 8 - Configuring PC in Windows 2000

Quick Start Guide 6 Configuring PC in Windows 2000 1. Go to Start / Settings / Control Panel . In the Control Panel, double-click on Network and Dial-up Connections . 2. Double-click Local Area Connection . 3. In the Local Area Connection Status window click Properties . 4. Select Internet Protocol ...

Page 10 - Configuring PC in Windows NT4.0

Quick Start Guide 8 Configuring PC in Windows NT4.0 1. Go to Start / Settings / Control Panel . In the Control Panel, double-click on Network and choose the Protocols tab. 2. Select TCP/IP Protocol and click Properties . 3. Select the Obtain an IP address from a DHCP server radio button and click OK...

Page 11 - Configuring Your ADSL Firewall Router

Billion BIPAC-5100 / 5100W ADSL Router 9 Configuring Your ADSL Firewall Router 1. Open the web browser and type http://192.168.1.254 in the browser’s address box. This number is the default IP address for this router. Press Enter . 2. A username and password window will appear. The default username ...

Page 12 - Verifying Your Local Network Connection with the Device; Product Support and Contact Information

Quick Start Guide 10 Verifying Your Local Network Connection with the Device To see if this ADSL Router is visible on the local network, go to Start / Run . In the Run dialog box, type “ping 192.168.1.254” then press OK . A command prompt window will pop out. If your ping is successful which means y...