Belkin F9K1001V5 8820ed01312uk - Manuals

3 GettInG StaRted Connect to Your Router The default network ID and password information for your router can be found on the product label on the bottom of the Router. Use your computer, tablet, or smartphone to connect to the wireless network shown on the router product label. For information on ho...

5 GettInG StaRted Once your Router is online, it will determine if there is a firmware update available and offer to install it. Please allow up to 5 minutes for the firmware to update. If there are no updates available, then setup will proceed.

7 GettInG StaRted Please take this opportunity to register your Router. This will help technical support if there is a problem with your Router. Simply complete each of the required fields and click “Complete Registration.” If you don’t want to register right now, click “Register Later” to proceed.

8 GettInG StaRted At the next screen you can download optional software that was bundled with your Router. This screen shows you optional software that is available for your Router, such as the Belkin Wi-Fi app used to access your router’s homepage quickly. If you wish to download and install this s...

9 GettInG StaRted Using the WPS Button 1. Start WPS Push Button Connection (WPS PBC) on your computer or other Wi-Fi device that you would like to connect wirelessly to your Router. Often there will be a button for this purpose in software that came with the device, or a physical “ WPS,” “PBC,” or “...

10 GettInG StaRted Manually Set Up Your Internet Connection Use a browser to visit http://router/. You can also tr y visiting http://192.168.2.1/. The Router’s Welcome page should appear. Click the “Set it up manually” link. Please select the type of connection your ISP provides. Refer to page 16 fo...

11 GettInG StaRted If you decide to change these settings, then enter the new values and click “Save and Continue.” (Note: The password must be at least 8 characters long.) If you changed your network name and password, make note of it on the ser vice card located on the foot of the Router. You will...

13 GettInG StaRted This screen shows you optional software that is available for your Router, such as the Belkin Wi-Fi App, to allow you to access the Router’s homepage with ease. If you wish to download and install any of these software programs, simply click on the button appropriate for your devi...

15 GettInG StaRted Manually Configuring Your Router’s Internet from the dashboard To set up your ISP connection manually, select “ISP Connection Type” from the list under the header “ WAN Settings.”

16 GettInG StaRted dynamic Connection Cable and fiber customers generally require a dynamic connection. Some DSL customers require a PPPoE connection. Let’s tr y dynamic first. Select “Dynamic” from the menu that appears and press “Next.”

17 GettInG StaRted A host name is generally not required. Hit “Save.” The Router will restart. If after a few minutes your Internet Status says “Online,” you’re done! You can surf the Internet. If these steps do not work, tr y restarting your modem and repeating the process. If not, we’ll tr y a PPP...

18 GettInG StaRted PPPoe Connection Some DSL customers require a PPPoE connection. Select PPPoE this time and press “Next.”

20 GettInG StaRted Android ™ (phones and tablets) 1. Open the Settings app and select Wireless and Network . 2. From there, select Wi-Fi to see the list of available networks. 3. Select your wireless network from the list. If asked to do so, enter your network password. Connect Your Wireless devices...

21 GettInG StaRted Windows ® 7 Your computer provides a menu of available wireless networks at the right end of the task bar. 1. Lef t-click on the icon that looks like signal strength bars. 2. Select your wireless network from the list. If asked, enter your network password (network key). Windows V...

23 GettinG to Know Your router A) Modem (wAn) Connector Connect your modem to this port using an Ethernet cable. B) wired (LAn) Connectors Connect computers and other wired network devices to these ports using Ethernet cables. C) Power Connector Connect the included power supply to this jack. D) res...

25 Technical DeTails Technical Features integrated 802.11n Wireless access Point The N150 technology enhances your Router’s wireless capabilities, allowing for data transfer speeds of up to 150Mbps across your network. naT iP address sharing To save you the cost of adding IP addresses per cosave you...

26 Technical DeTails system Requirements Router Broadband Internet connection such as a cable or DSL modem with RJ45 (Ethernet) connection At least one computer with an installed network interface adapter TCP/IP networking protocol installed on each computer RJ45 Ethernet networking cable Internet b...

28 USING YOUR ROUTER 28 Updating the Router’s Firmware via the Web Interface The following steps show you how to update your Router’s firmware using its web interface. You do not need to be connected to the Internet as this interface is built into the Router itself. Setup steps: 1. Locate and downlo...

29 USING YOUR ROUTER 29 6. Click on “Firmware Update” toward the bottom. 7. Click the “Choose File” button toward the middle of the screen to search for the file you saved previously. Note: The firmware version in the image above is depicted as an example. Your file name will var y depending on your...

30 USING YOUR ROUTER 30 9. Click the “Update” button. 10. A prompt asking, “Are you sure you want to continue with upgrading?” will appear. Click “OK”. 11. A second prompt will open telling you the Router will not respond during the upgrade and warning you not to remove the power supply from the Rou...

31 USING YOUR ROUTER Resetting the Router Reset Button – Red The “Reset ” button is used in rare cases when the Router may function improperly. Resetting the Router will restore the Router’s normal operation while maintaining the programmed settings. You can also restore the factor y default setting...

32 USING YOUR ROUTER Restoring the Router to Default Settings Using the Web Interface Symptoms You need to restore the factor y defaults using the web interface. This may be because the Router is not performing as expected or you wish to remove all previously configured settings. Setup steps 1. Open...

33 USING YOUR ROUTER 4. Click on the “Restore Defaults” button. 5. A warning box will open that says, “ Warning: All your settings will be lost. Are you sure you want to do this?” Click “OK”. 6. The Router will begin the restoring process. Once the restore is complete, the Router will reboot. Note: ...

34 TroubleshooTing, supporT, and WarranTy Troubleshooting i can’t connect to the internet wirelessly. If the light on the front of the Router is solid blue, then your Router is connected to the Internet. You may not be connected to the Router’s wireless network. Please refer to “Connect Your Wireles...

35 TroubleshooTing, supporT, and WarranTy limiting the wireless transmit rate — Limiting the wireless transmit rate can help improve range and connection stability. Most wireless cards have the ability to limit the transmission rate. To change this property in Windows, go to the Windows Control Pane...

38 TroubleshooTing, supporT, and WarranTy Technical Support AUSTRIA 0820 200 766 www.belkin.com/de/networking/ BELGIUM 07 07 00 073 www.belkin.com/nl/networking/www.belkin.com/fr/networking/ CZECH REPUBLIC 239 000 406 www.belkin.com/uk /networking/ DENMARK 701 22 403 www.belkin.com/uk /networking/ F...

39 TroubleshooTing, supporT, and WarranTy belkin international, inc., limited 2-year product Warranty What this warranty covers. Belkin International, Inc. (“Belkin”) warrants to the original purchaser of this Belkin product that the product shall be free of defects in design, assembly, material, or...

40 TroubleshooTing, supporT, and WarranTy how to get service. To get ser vice for your Belkin product you must take the following steps: 1. Contact Belkin International, Inc., on the number listed on page 38, Attn: Customer Ser vice, or call (800)-223-5546, within 15 days of the Occurrence. Be prepa...

41 TroubleshooTing, supporT, and WarranTy how state law relates to the warranty. THIS WARRANT Y CONTAINS THE SOLE WARRANT Y OF BELKIN. THERE ARE NO OTHER WARRANTIES, EXPRESSED OR, EXCEPT AS REQUIRED BY LAW, IMPLIED, INCLUDING THE IMPLIED WARRANT Y OR CONDITION OF QUALIT Y, MERCHANTABILIT Y OR FITNES...

42 RegulatoRy InfoRmatIon Declaration of Conformity with electromagnetic compatibility and electromagnetic interference We, Belkin International, Inc., of Schiphol-Rijk, Netherlands, declare under our sole responsibility that the device, F9K1001, complies with Directives stated in our EU declaration...

43 RegulatoRy InfoRmatIon europe – eu Declaration of Conformity This device complies with the essential requirements of the R&TTE Directive 1999/5/EC, the EMC Directive 2004/108/EC, and the low-voltage Directive 2006/95/EC. A copy of the European Union CE marking “Declaration of Conformity” may ...