Page 2 - Table of Contents
11 Table of Contents 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Benefits of a Home Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1Advantages of a Wireless Network . . . . . . . . . . . . . . . . . . . . . . . . . 1Pl...
Page 3 - Introduction; ct
11 Introduction 1 2 3 4 5 6 7 8 9 10 se ct io n Thank you for purchasing the Belkin High-Speed Mode Wireless G Router (the Router) with Built-In USB Print Server. Below are two short sections, one discusses the benefits of home networking, the other outlines best practices in order to maximize your ...
Page 4 - Placement of your Wireless G Router; Important Factors for Placement and Setup; While some of the items listed below can affect network; Wireless Router or Access Point Placement; • Ensure that your Wireless Router’s or Access Point’s
3 2 3 2 Introduction Placement of your Wireless G Router Important Factors for Placement and Setup Your wireless connection will be stronger the closer your computer is to your Wireless Router or Access Point. Typical indoor operating range for your wireless devices is between 100 and 200 feet. In t...
Page 5 - Avoid Obstacles and Interference; • Try moving cordless phones away from Wireless Routers or; Choose the “quietest” channel for your wireless network
33 Introduction 1 2 3 4 5 6 7 8 9 10 se ct io n 2. Avoid Obstacles and Interference Avoid placing your Wireless Router or Access Point near devices that may emit radio “noise,” such as microwave ovens. Dense objects that can inhibit Wireless communication include: • Refrigerators• Washers and/or dry...
Page 6 - • Virtual Private Network (VPN) connections, often used to
5 4 5 4 Introduction Experiment with more than one of the available channels, in order to find the clearest connection and avoid interference from neighbouring cordless phones or other wireless devices. For Belkin wireless networking products, use the detailed Site Survey and wireless channel inform...
Page 7 - or call Belkin Technical Support at:
55 Introduction 1 2 3 4 5 6 7 8 9 10 se ct io n For more information regarding our networking products, visit our website at www.belkin.com/networking or call Belkin Technical Support at: Europe: 00 800 223 55 460
Page 8 - Product Overview
7 6 7 6 Product Overview Product Features In minutes you will be able to share your Inter net connection and network your computers. The following is a list of features that make your new Belkin Wireless G Router with Gigabit Switch an ideal solution for your home or small office network. Works with...
Page 9 - SPI Firewall
77 Product Overview 1 2 3 4 5 6 7 8 9 10 se ct io n SPI Firewall Your Router is equipped with a firewall that will protect your network from a wide array of common hacker attacks including IP Spoofing, Land Attack, Ping of Death (PoD), Denial of Service (DoS), IP with zero length, Smurf Attack, TCP ...
Page 10 - Easy Install Wizard software is compatible with Windows 98SE, Me,; Integrated 802.11g Wireless Access Point
9 8 9 8 Product Overview NOTE: Easy Install Wizard software is compatible with Windows 98SE, Me, 2000, XP and Mac OS 9.X and Mac OS X. If you are using another operating system, the Wireless Router can be set up using the Alternative Method described in this manual (see page 22). Integrated 802.11g ...
Page 11 - Knowing Your Router; Package Contents
99 Knowing Your Router 1 2 3 4 5 6 7 8 9 10 se ct io n Package Contents • Belkin High-Speed Mode Wireless G Router with Gigabit Switch • Quick Installation Guide • Belkin Easy Install Wizard Software CD • Belkin RJ45 Ethernet Networking Cable • Power Supply • User Manual System Requirements • Broadb...
Page 14 - Connect the included 5V DC power supply to this jack.
13 12 13 12 Knowing Your Router 6. Power Jack - GRAY Connect the included 5V DC power supply to this jack. 7. Connections to Computers (LAN Ports) - BLUE Connect your wired (non-wireless) computers to these ports. These ports are RJ45, 10/100/1000 auto-negotiation, auto-uplinking ports for standard ...
Page 15 - a. Resetting the Router
13 13 Knowing Your Router 1 2 3 4 5 6 7 8 9 10 se ct io n a. Resetting the Router Push and release the Reset button. The lights on the Router will momentarily flash. The Power/Ready light will begin to blink. When the Power/Ready light becomes solid again, the reset is complete. b. Restoring the Fac...
Page 16 - Connecting and Configuring Your Router; Verify the contents of your box. You should have the following:
15 14 15 14 Connecting and Configuring Your Router Verify the contents of your box. You should have the following: • Belkin High-Speed Mode Wireless G Router with Gigabit Switch • Quick Installation Guide • Belkin Easy Install Wizard Software CD • RJ45 Ether net Networking Cable (for connection of t...
Page 17 - DO NOT CONNECT THE ROUTER AT THIS TIME.
15 15 Connecting and Configuring Your Router 1 2 3 4 5 6 7 8 9 10 se ct io n and working at the time of installation. If it is not, you must use the “Alter nate Setup Method” section of this manual to configure your Router. Additionally, if you are using an operating system other than Windows 98SE, ...
Page 18 - Welcome Screen
17 16 17 16 Connecting and Configuring Your Router Welcome Screen The Wizard’s welcome screen will appear. Make sure you have not connected the Router at this point. If you have connected your Router, please reconnect your computer directly to the modem. Click “Next” when you are ready to move on. P...
Page 19 - Step 2 Hardware Setup; This step instructs you to locate
17 17 Connecting and Configuring Your Router 1 2 3 4 5 6 7 8 9 10 se ct io n Multi-NICs Screen If you have more than one network adapter installed in your computer a Multi-NIC Screen will appear. If you have more than one network adapter installed in your computer, the Wizard will need to know which...
Page 21 - Step 3 Checking the Connection; Once you have completed; User Name and Password Needed
19 19 Connecting and Configuring Your Router 1 2 3 4 5 6 7 8 9 10 se ct io n Step 3 Checking the Connection 3.1 Once you have completed connecting the Router, the Wizard will check the connection to the Router and then go on to determine what type of Inter net connection you have. 3.2 User Name and ...
Page 22 - This Step Is Optional.; Click “Next” if; Step 4 Configuring the Router
21 20 21 20 Connecting and Configuring Your Router 3.3 Wireless Setup This Step Is Optional. Click “Next” if you want to skip it. Using this step, you can customize your wireless network settings if you want to. Follow the steps on the screen to complete this step. Click “Next” to continue. Step 4 C...
Page 23 - You have finished installing your new Belkin Router.
21 21 Connecting and Configuring Your Router 1 2 3 4 5 6 7 8 9 10 se ct io n 4.2 Finished When the Inter net connection is complete, the Wizard will tell you that you are finished. The “Connected” LED on the front of the Router will be solid GREEN, indicating that the Router is now connected to the ...
Page 24 - Alternative Setup Method; Step 1 Connecting your Router
23 22 23 22 Alternative Setup Method The Advanced User Interface is a web-based tool that you can use to set up the Router if you don’t want to use the Easy Install Wizard. You can also use it to manage advanced functions of the Router. From the Advanced User Interface, you can perform the following...
Page 26 - Step 2 Set your Computer’s Network Settings to Work; If you have difficulty accessing the Router’s web-; Logging into the Router
25 24 25 24 Alternative Setup Method Step 2 Set your Computer’s Network Settings to Work with a DHCP Server See the section in this manual called “Manually Configuring Network Settings” for directions. Step 3 Configuring the Router Using the Web-Based Advanced User Interface Using your Inter net bro...
Page 27 - Logging out of the Router
25 25 Alternative Setup Method Logging out of the Router One computer at a time can log in to the Router for the purposes of making changes to the settings of the Router. Once a user has logged in to make changes, there are two ways that the computer can be logged out. Clicking the “Logout” button w...
Page 28 - Internet Status Indicator
27 26 27 26 Alternative Setup Method 3. Internet Status Indicator This indicator is visible in all pages of the Router, indicating the connection status of the Router. When the indicator says “connection OK” in GREEN, the Router is connected to the Internet. When the Router is not connected to the I...
Page 29 - Step 4 Configuring your Router for Connection to your Internet; on the left side of the screen. Select
27 27 Alternative Setup Method Step 4 Configuring your Router for Connection to your Internet Service Provider (ISP) The “Inter net/WAN” tab is where you will set up your Router to connect to your Inter net Service Provider (ISP). The Router is capable of connecting to virtually any ISP’s system pro...
Page 30 - Setting your Connection Type; next
29 28 29 28 Alternative Setup Method Setting your Connection Type From the connection type page, you can select the type of connection you use. Select the type of connection you use by clicking the button (1) next to your connection type and then clicking “Next” (2) . (2) (1)
Page 31 - Setting your Internet Service Provider (ISP) Connection Type; . If your ISP did not assign you a host name, or you; Change WAN MAC Address
29 29 Alternative Setup Method Setting your Internet Service Provider (ISP) Connection Type to Dynamic IP A dynamic connection type is the most common connection type found with cable modems. Setting the connection type to “dynamic” in many cases is enough to complete the connection to your ISP. Som...
Page 32 - Provided by your ISP. Enter your IP address here.; ISP Gateway Address; Provided by your ISP. Enter the ISP gateway address here.; My ISP Provides More Than One Static IP Address
31 30 31 30 Alternative Setup Method Setting your Internet Service Provider (ISP) Connection Type to Static IP A static IP address connection type is less common than other connection types. If your ISP uses static IP addressing, you will need your IP address, subnet mask, and ISP gateway address. T...
Page 33 - Setting your ISP connection type to PPPoE
31 31 Alternative Setup Method Setting your ISP connection type to PPPoE Most DSL providers use PPPoE as the connection type. If you use a DSL modem to connect to the Inter net, your ISP may use PPPoE to log you into the service. If you have an Inter net connection in your home or small office that ...
Page 35 - Setting your Internet Service Provider (ISP) Connection Type to; . After you apply the changes, the Internet Status; Service IP Address; Provided by your ISP. Enter your service IP address here.
33 33 Alternative Setup Method Setting your Internet Service Provider (ISP) Connection Type to Point-to-Point Tunneling Protocol (PPTP) [European Countries Only]. Some ISPs require a connection using PPTP protocol, a type of connection most common in European countries. This sets up a direct connect...
Page 36 - Setting Custom Domain Name Server (DNS) Settings; should be checked if your ISP did not give you a specific DNS
35 34 35 34 Alternative Setup Method 8. Disconnect after X…. The Disconnect feature is used to automatically disconnect the Router from your ISP when there is no activity for a specified period of time. For instance, placing a check mark next to this option and entering “5” into the minute field wil...
Page 37 - Cloning your MAC Address; Changes”; Entering a Specific MAC Address; and click “Apply Changes”
35 35 Alternative Setup Method Cloning your MAC Address To clone your MAC address, make sure that you are using the computer that was ORIGINALLY CONNECTED to your modem before the Router was installed. Click the “Clone” button (1) . Click “Apply Changes” (3) . Your MAC address is now cloned to the R...
Page 38 - Using the Web-Based Advanced User Interface; Viewing the LAN Settings; Clicking on the header of the LAN tab
37 36 37 36 Using the Web-Based Advanced User Interface Using your Inter net browser, you can access the Router’s Web-Based Advanced User Interface. In your browser, type “192.168.2.1” (do not type in anything else such as “http://” or “www”) then press the “Enter” key.You will see the Router’s home...
Page 39 - Changing LAN Settings; NOT; make changes to
37 37 Using the Web-Based Advanced User Interface 1 2 3 4 5 6 7 8 9 10 se ct io n Changing LAN Settings All settings for the inter nal LAN setup of the Router can be viewed and changed here. 1. IP Address The “IP address” is the inter nal IP address of the Router. The default IP address is “192.168....
Page 40 - Local Domain Name
39 38 39 38 Using the Web-Based Advanced User Interface 3. DHCP Server The DHCP server function makes setting up a network very easy by assigning IP addresses to each computer on the network automatically. The default setting is “On”. The DHCP server can be tur ned OFF if necessary, however, in orde...
Page 41 - Viewing the DHCP Client List Page
39 39 Using the Web-Based Advanced User Interface 1 2 3 4 5 6 7 8 9 10 se ct io n Viewing the DHCP Client List Page You can view a list of the computers (known as clients), which are connected to your network. You are able to view the IP address (1) of the computer, the host name (2) (if the compute...
Page 42 - and
41 40 41 40 Configuring the Wireless Network Settings The Wireless tab lets you make changes to the wireless network settings. From this tab you can make changes to the wireless network name (SSID), operating channel, encryption security settings, and configure the Router to be used as an access poi...
Page 43 - Using the Wireless Mode Switch; Please note that switching to 802.11g-LRS mode may decrease
41 41 Using the Web-Based Advanced User Interface Using the Wireless Mode Switch Your Router can operate in three different wireless modes: “802.11g-Auto”, “802.11g-Only”, and “802.11g-LRS”. The different modes are explained below. 802.11g-Auto Mode In this mode, the Router is compatible with 802.11...
Page 44 - Using High-Speed Mode; Selecting “Off” will disable Turbo mode.
43 42 43 42 Using the Web-Based Advanced User Interface Using High-Speed Mode The Router supports two High-Speed modes, 125HSM* mode and Frame Bursting mode. Selecting “125HSM mode” will result in all devices running in 125HSM mode if all devices are capable of 125Mbps speeds. If any non-125HSM devi...
Page 45 - Changing the Wireless Channel
43 43 Using the Web-Based Advanced User Interface Changing the Wireless Channel There are a number of operating channels you can choose from. In the United States and Australia, there are 11 channels. In the United Kingdom and most of Europe, there are 13 channels. In a small number of other countri...
Page 46 - Using the Broadcast SSID Feature
45 44 45 44 Using the Web-Based Advanced User Interface Using the Broadcast SSID Feature Note: This advanced feature should be employed by advanced users only. For security, you can choose not to broadcast your network’s SSID. Doing so will keep your network name hidden from computers that are scann...
Page 47 - Network
45 45 Using the Web-Based Advanced User Interface Securing your Wi-Fi ® Network Here are a few different ways you can maximize the security of your wireless network and protect your data from prying eyes and ears. This section is intended for the home, home office, and small office user. At the time...
Page 48 - Encryption Keys
47 46 47 46 Using the Web-Based Advanced User Interface 128-Bit WEP As a result of 64-bit WEP’s potential security weaknesses, a more secure method of 128-bit encryption was developed. 128-bit encryption includes a key length of 104 bits plus 24 additional bits of system-generated data (128 bits tot...
Page 49 - uses what is known as a
47 47 Using the Web-Based Advanced User Interface WPA (Wi-Fi Protected Access) WPA (Wi-Fi Protected Access) is a new Wi-Fi standard that was designed to improve upon the security features of WEP. To use WPA security, the drivers and software of your wireless equipment must be upgraded to support WPA...
Page 50 - WEP Setup; 4-Bit WEP Encryption; After selecting your WEP encryption mode, you can enter your
49 48 49 48 Using the Web-Based Advanced User Interface WEP Setup 64-Bit WEP Encryption 1 Select “64-bit WEP” from the drop-down menu. 2. After selecting your WEP encryption mode, you can enter your key by typing in the hex key manually, or you can type in a passphrase in the “Passphrase” field and ...
Page 52 - Changing the Wireless Security Settings; WPA Setup; To use WPA security, all your clients must be upgraded to
51 50 51 50 Using the Web-Based Advanced User Interface Changing the Wireless Security Settings Your Router is equipped with WPA (Wireless Protected Access), the latest wireless security standard. It also supports the legacy security standard, WEP (Wired Equivalent Privacy). By default, wireless sec...
Page 53 - Setting WPA (with radius server) Settings; Enter the IP address of the radius server into the “Radius
51 51 Using the Web-Based Advanced User Interface 4. Click “Apply Changes” to finish. You must now set all clients to match these settings. Setting WPA (with radius server) Settings If your network uses a radius server to distribute keys to the clients, use this setting. 1. From the “Security Mode” ...
Page 54 - Configuring your Belkin Wireless G Network Cards to
53 52 53 52 Using the Web-Based Advanced User Interface Configuring your Belkin Wireless G Network Cards to Use Security Please Note: This section is to provide you with the information on how to configure your Belkin Wireless G Network Cards to use security.At this point, you should already have yo...
Page 55 - Connecting your Computer to a Wireless Network that Requires
53 53 Using the Web-Based Advanced User Interface Connecting your Computer to a Wireless Network that Requires WPA-PSK (no server)1. Double-click the “Signal Indicator” icon to bring up the “Wireless Network” screen. The Advanced button will allow you to view and configure more options of your card....
Page 57 - Setting Up WPA for a Non-Belkin Wireless Desktop and; The file that Microsoft has made available works only
55 55 Using the Web-Based Advanced User Interface Setting Up WPA for a Non-Belkin Wireless Desktop and Wireless Notebook Cards For non-Belkin WPA Wireless Desktop and Wireless Notebook Cards that are not equipped with WPA-enabled software, a file from Microsoft called “Windows XP Support Patch for W...
Page 58 - Setting Up Windows XP Wireless Network Utility to Use; Under Windows XP, click “Start > Control Panel > Network
57 56 57 56 Using the Web-Based Advanced User Interface Setting Up Windows XP Wireless Network Utility to Use WPA-PSK In order to use WPA-PSK, ensure you are using Windows Wireless Network Utility by doing the following: 1. Under Windows XP, click “Start > Control Panel > Network Connections”....
Page 60 - Using the Access Point Mode; This advanced feature should be employed by advanced users; defeat; the NAT IP sharing feature
59 58 59 58 Using the Web-Based Advanced User Interface Using the Access Point Mode Note: This advanced feature should be employed by advanced users only. The Router can be configured to work as a wireless network access point. Using this mode will defeat the NAT IP sharing feature and DHCP server. ...
Page 61 - Wireless Range Extension and Bridging; What is a Wireless Bridge?; * Wireless Range Extension and bridging will not work while in 125
59 59 Using the Web-Based Advanced User Interface Wireless Range Extension and Bridging Wireless Range Extension and Bridging works with the following models only: F5D7235-4 High-Speed Mode Wireless G Router with Gigabit SwitchF5D7231-4 High-Speed Mode Wireless G Router F5D7231-4P High-Speed Mode Wi...
Page 62 - Adding Another Network Segment Wirelessly
61 60 61 60 Using the Web-Based Advanced User Interface Adding Another Network Segment Wirelessly Bridging an Access Point to your Wireless Router allows you to add another network segment in another area in the home or office without running wires. Connecting a network switch or hub to the Access P...
Page 63 - Setting Up a Bridge Between your Wireless Router and a; PLEASE BE SURE TO FOLLOW THE STEPS BELOW,; Set your Access Point to the same channel as the Router. By
61 61 Using the Web-Based Advanced User Interface Setting Up a Bridge Between your Wireless Router and a Secondary Access Point Bridging your Belkin Router to a secondary Access Point requires that you access the Router’s Advanced Setup Utility and enter the MAC address of the Access Point in the ap...
Page 65 - Configuring the Firewall
63 63 Using the Web-Based Advanced User Interface Configuring the Firewall Your Router is equipped with a firewall that will protect your network from a wide array of common hacker attacks including:• IP Spoofing• SYN flood• Land Attack• UDP flooding• Ping of Death (PoD)• Tear Drop Attack• Denial of...
Page 66 - Configuring Internal Forwarding Settings
65 64 65 64 Using the Web-Based Advanced User Interface Configuring Internal Forwarding Settings The Virtual Servers function will allow you to route external (Internet) calls for services such as a web server (port 80), FTP server (Port 21), or other applications through your Router to your interna...
Page 67 - Setting Client IP Filters
65 65 Using the Web-Based Advanced User Interface Setting Client IP Filters The Router can be configured to restrict access to the Internet, e-mail, or other network services at specific days and times. Restriction can be set for a single computer, a range of computers, or multiple computers. To res...
Page 68 - Setting MAC Address Filtering; To enable this feature, select “Enable MAC Address Filtering”
67 66 67 66 Using the Web-Based Advanced User Interface Setting MAC Address Filtering The MAC address filter is a powerful security feature that allows you to specify which computers are allowed on the network. Any computer attempting to access the network that is not specified in the filter list wi...
Page 70 - Blocking an ICMP Ping; To turn off the ping response, select “Block ICMP Ping”
69 68 69 68 Using the Web-Based Advanced User Interface Blocking an ICMP Ping Computer hackers use what is known as “pinging” to find potential victims on the Internet. By pinging a specific IP address and receiving a response from the IP address, a hacker can determine that something of interest mi...
Page 71 - Utilities Tab; Parental Control; See separate Parental Control User Manual from Belkin.
69 69 Using the Web-Based Advanced User Interface Utilities Tab This screen lets you manage different parameters of the Router and perform certain administrative functions. Parental Control See separate Parental Control User Manual from Belkin. 1 2 3 4 5 6 7 8 9 10 se ct io n
Page 72 - Restarting the Router; Click the “Restart
71 70 71 70 Using the Web-Based Advanced User Interface Restarting the Router Sometimes it may be necessary to restart or reboot the Router if it begins working improperly. Restarting or rebooting the Router will NOT delete any of your configuration settings. Restarting the Router to Restore Normal ...
Page 73 - Restoring Factory Default Settings; Click the “Restore
71 71 Using the Web-Based Advanced User Interface Restoring Factory Default Settings Using this option will restore all of the settings in the Router to the factory (default) settings. It is recommended that you back up your settings before you restore all of the defaults. 1. Click the “Restore Defa...
Page 74 - Saving a Current Configuration; Click “Save”. A window
73 72 73 72 Using the Web-Based Advanced User Interface Saving a Current Configuration You can save your current configuration by using this feature. Saving your configuration will allow you to restore it later if your settings are lost or changed. It is recommended that you back up your current con...
Page 75 - When the save is; Restoring a Previous Configuration; Click “Browse”. A window will open that allows you to select the
73 73 Using the Web-Based Advanced User Interface 3. When the save is complete, you will see the following window. Click “Close”. The configuration is now saved. Restoring a Previous Configuration This option will allow you to restore a previously saved configuration. 1. Click “Browse”. A window wil...
Page 76 - You will be asked if you want to continue. Click “OK”.
75 74 75 74 Using the Web-Based Advanced User Interface 2. You will be asked if you want to continue. Click “OK”. 3. A reminder window will appear. It will take up to 60 seconds for the configuration restoration to complete. Click “OK”. 4. A 60-second countdown will appear on the screen. When the co...
Page 77 - Updating the Firmware; The “Check Firmware”
75 75 Using the Web-Based Advanced User Interface Updating the Firmware From time to time, Belkin may release new versions of the Router’s firmware. Firmware updates contain feature improvements and fixes to problems that may exist. When Belkin releases new firmware, you can download the firmware fr...
Page 78 - Downloading a New Version of Firmware; To download the new version of firmware, click “Download”.
77 76 77 76 Using the Web-Based Advanced User Interface Downloading a New Version of Firmware If you click the “Check Firmware” button and a new version of firmware is available, you will see a screen such as the following. 1. To download the new version of firmware, click “Download”. 2. A window wi...
Page 79 - In the “Firmware
77 77 Using the Web-Based Advanced User Interface Updating the Router’s Firmware1. In the “Firmware Update” page, click “Browse”. A window will open that allows you to select the location of the firmware update file. All firmware files end with a “.dlf”. 2. Browse to the firmware file you downloaded...
Page 80 - You will be asked if you; The firmware update is complete!
79 78 79 78 Using the Web-Based Advanced User Interface 3. The “Update Firmware” box will now display the location and name of the firmware file you just selected. Click “Update”. 4. You will be asked if you are sure you want to continue. Click “OK”. 5. You will see one more message. This message te...
Page 81 - Changing System Settings; Only one computer can be logged into the Router’s advanced setup
79 79 Using the Web-Based Advanced User Interface Changing System Settings The “System Settings” page is where you can enter a new administrator password, set the time zone, enable remote management, and turn on and off the NAT function of the Router. Setting or Changing the Administrator Password T...
Page 82 - Setting the Time and Time Zone; Before you enable this advanced feature of your Belkin Router,; MAKE SURE
81 80 81 80 Using the Web-Based Advanced User Interface Setting the Time and Time Zone The Router keeps time by connecting to a Simple Network Time Protocol (SNTP) server. This allows the Router to synchronize the system clock to the global Internet. The synchronized clock in the Router is used to r...
Page 83 - This advanced feature should be employed by advanced users only.; MAKE SURE YOU HAVE SET THE; Enabling/Disabling UPnP
81 81 Using the Web-Based Advanced User Interface Enabling/Disabling NAT (Network Address Translation) Note: This advanced feature should be employed by advanced users only. Before enabling this function, MAKE SURE YOU HAVE SET THE ADMINISTRATOR PASSWORD . Network Address Translation (NAT) is the me...
Page 84 - Manually Configuring Computer Network Settings; Your network adapter(s) are now configured for use with the Router.
83 82 83 82 Manually Configuring Computer Network Settings In order for your computer to properly communicate with your Router, you will need to change your PC’s TCP/IP settings to DHCP. Manually Configuring Network Adapters in Windows 2000, NT, or XP 1. Click “Start”, “Settings”, then “Control Pane...
Page 85 - Restart the computer. When the computer restarts, your network
83 83 Manually Configuring Computer Network Settings Manually Configuring Network Adapters in Windows 98SE or Me1. Right-click on “My Network Neighbourhood” and select “Properties” from the drop-down menu. 2. Select “TCP/IP -> settings” for your installed network adapter. You will see the followi...
Page 86 - Manually Configuring Network Adapters in Mac OS
85 84 85 84 Manually Configuring Computer Network Settings Set up the computer that is connected to the cable or DSL modem FIRST using these steps. You can also use these steps to add computers to your Router after the Router has been set up to connect to the Inter net. Manually Configuring Network ...
Page 87 - Close the window. If you made any changes, the following
85 85 Manually Configuring Computer Network Settings 5. Close the window. If you made any changes, the following window will appear. Click “Save”. Restart the computer. When the computer restarts, your network settings are now configured for use with the Router. 1 2 3 4 5 6 7 8 9 10 se ct io n
Page 88 - Manually Configuring Network Adapters in Mac OS X; Click on the “System Preferences” icon.
87 86 87 86 Manually Configuring Computer Network Settings Manually Configuring Network Adapters in Mac OS X 1. Click on the “System Preferences” icon. 2. Select “Network” (1) from the “System Preferences” menu. 3. Select “Built-in Ether net” (2) next to “Show” in the Network menu. (1) (2) (3) (4)
Page 89 - Select the “TCP/IP” tab
87 87 Manually Configuring Computer Network Settings Manually Configuring Computer Network Settings 4. Select the “TCP/IP” tab (3) . Next to “Configure” (4) , you should see “Manually” or “Using DHCP”. If you do not, check the PPPoE tab (5) to make sure that “Connect using PPPoE” is NOT selected. If...
Page 90 - Recommended Web Browser Settings; Start your web browser. Select “Tools” then “Inter net Options”.
89 88 89 88 Recommended Web Browser Settings In most cases, you will not need to make any changes to your web browser’s settings. If you are having trouble accessing the Inter net or the advanced web-based user interface, then change your browser’s settings to the recommended settings in this sectio...
Page 91 - Make sure there are no check marks next to any of the displayed
89 89 1 2 3 4 5 6 7 8 9 10 se ct io n Recommended Web Browser Settings 4. Make sure there are no check marks next to any of the displayed options: “Automatically detect settings”, “Use automatic configuration script”, and “Use a proxy server”. Click “OK”. Then click “OK” again in the “Inter net Opti...
Page 92 - Troubleshooting
91 90 91 90 Troubleshooting Problem: Installation CD does not automatically start Solution: If the CD-ROM does not start the Easy Install Wizard automatically, it could be that the computer is running other applications that are interfering with the CD drive. 1. If the Easy Install Wizard screen doe...
Page 96 - • You may need to configure your Router to meet the specific
95 94 95 94 Troubleshooting • You may need to configure your Router to meet the specific requirements of your ISP. To search our Knowledge Base for ISP-specific issues, go to: http://web.belkin.com/support and type in “ISP” If you are still unable to access the Inter net after verifying these settin...
Page 97 - Does the name of your wireless network appear in the results?; Yes, my network name is listed
95 95 Troubleshooting Problem: I can’t connect to the Inter net wirelessly Solution: If you are unable to connect to the Inter net from a wireless computer, please check the following items: 1. Look at the lights on your Router. If you’re using a Belkin Router, the lights should be as follows: • The...
Page 98 - If the network has security (encryption) enabled, you will need to; Solution; Temporarily move computer, if possible, five to ten feet from
97 96 97 96 Troubleshooting Problem: I can’t connect to the Inter net wirelessly, but my network name is listed Solution: If the name of your network is listed in the “Available Networks” list, please follow the steps below to connect wirelessly: 1. Click on the correct network name in the “Availabl...
Page 99 - Using a computer that is connected to the Router via a network; Changing the wireless channel; - Depending on local wireless; Limiting the wireless transmit rate; - Limiting the wireless
97 97 Troubleshooting 2. Using a computer that is connected to the Router via a network cable (as opposed to wirelessly), ensure that “Broadcast SSID” is enabled. This setting is found on the Router’s wireless “Channel and SSID” configuration page. If you are still unable to access the Inter net aft...
Page 100 - How do I extend the range of my wireless network
99 98 99 98 Troubleshooting your wireless card’s connection. In the properties dialog, select the configure button on the General tab (Windows 98 users will have to select the wireless card in the list box and then click properties), then choose the advanced tab and select the Rate property. Wireles...
Page 101 - Log into your Wireless Router or Access Point.
99 99 Troubleshooting Problem: I am having difficulty setting up Wired Equivalent Privacy (WEP) security on a Belkin Router or Belkin Access Point Solution 1. Log into your Wireless Router or Access Point. Open your web browser and type in IP address of the Wireless Router or Access Point. (The Rout...
Page 103 - A WEP key is a mixture of numbers and letters from; To use WPA security, all your clients must be upgraded; for the following products:
101 101 Troubleshooting Important: A WEP key is a mixture of numbers and letters from A-F and 0-9. For 128-bit WEP, you need to enter 26 keys. This Network key needs to match the key you assign to your Wireless Router or Access Point. For example: C3030FAF4BB2C3D44BC3D4E7E4 = 128-bit key 8. Click “O...
Page 106 - Important; : WPA-PSK is a mixture of numbers and letters from A-
105 104 105 104 Troubleshooting Problem: I am having difficulty setting up Wi-Fi Protected Access (WPA) security on a wireless Belkin client card for a home network. Solution: Clients must use the same key that the Wireless Router or Access Point uses. For instance if the key is “Smith Family Networ...
Page 107 - Under “Network Authentication” select WPA
105 105 Troubleshooting Problem: I am having difficulty setting up Wi-Fi Protected Access (WPA) security on a Belkin wireless client card for a business. Solution: Double-click the Signal Indicator icon to bring up the Wireless Network screen. The Advanced button will allow you to view and configure...
Page 108 - Supported Operating Systems:
107 106 107 106 Troubleshooting Problem: I am having difficulty setting up Wi-Fi Protected Access (WPA) security on a non-Belkin client card for a home network. Solution: For non-Belkin WPA Wireless Desktop and Wireless Notebook Network Cards that are not equipped with WPA-enabled software, a file f...
Page 109 - Select “TKIP” or “AES” under “Date Encryption”. This setting will
107 107 Troubleshooting 5. Select “TKIP” or “AES” under “Date Encryption”. This setting will have to be identical to the Wireless Router or Access Point that you set up. 6. Type in your encryption key in the “Network Key” box. Important: Enter your Pre-Shared key. This can be from 8 to 63 characters...
Page 110 - Wireless Comparison
109 108 109 108 Troubleshooting What’s the difference between 802.11b, 802.11g and 802.11a? Currently there are three levels of wireless networking standards, which transmit data at very different maximum speeds. Each is based on the designation 802.11x, so named by the IEEE, the board that is respo...
Page 111 - Technical Support; You can find technical support information at; networking; or
109 109 Troubleshooting Technical Support You can find technical support information at http://www.belkin.com/ networking or www.belkin.com through the tech support area. If you want to contact technical support by phone, please call: Europe: 00 800 223 55 460 Troubleshooting 1 2 3 4 5 6 7 8 9 10 se...
Page 112 - Information; Caution: Exposure to Radio Frequency Radiation.; residential installation.; FCC Statement
110 110 111 Information Caution: Exposure to Radio Frequency Radiation. The radiated output power of this device is far below the FCC radio frequency exposure limits. Nevertheless, the device shall be used in such manner that the potential for human contact during normal operation is minimized. When...
Page 113 - Modifications
Information • Reorient or relocate the receiving antenna. • Increase the distance between the equipment and the receiver. • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Mod...
Page 114 - Belkin Corporation Limited Lifetime Product Warranty; IN LIEU OF ALL OTHERS, WHETHER ORAL OR WRITTEN, EXPRESSED
112 112 Belkin Corporation Limited Lifetime Product Warranty Belkin Corporation warrants this product against defects in materials and workmanship for its lifetime. If a defect is discovered, Belkin will, at its option, repair or replace the product at no charge provided it is returned during the wa...
Page 116 - Wireless G Router; with Gigabit Switch
© 2004 Belkin Corporation. All rights reserved. All trade names are registered trademarks of respective manufacturers listed. The 125 HSM logo, 54g logo and 54g are trademarks of Broadcom Corporation in the U.S. and other countries. Apple, AirPort, Mac, Mac OS, and AppleTalk are trademarks of Apple ...
Belkin F5U002
Manual
Belkin W1896B 03/01
Manual
Belkin PM01758
Manual
Belkin F1DA104Z
Manual
Belkin PLAY N750 DB
Manual
Belkin P74081EA
Manual
Belkin F1D5104P
Manual
Belkin AP41300f
Manual
Belkin P73096
Manual
Belkin F8E467
Manual
Belkin F1D104
Manual
Belkin LZR703PL
Manual
Belkin F1DN104D
Manual
Belkin F8E858-BNDL
Manual
Belkin BZ106200IR2M
Manual
Belkin 280
Manual
Belkin F5U503
Manual
Belkin F1DJ104-B
Manual
Belkin PM00730tt
Manual
Belkin OmniView
Manual