Belkin F1DZ104T - Manuals - manualsarea.com

Page 2 - Package Contents; INTRODUCTION

Congratulations on your purchase of this Belkin OmniView SE Plus SeriesKVM Switch (the Switch). Our diverse line of KVM solutions exemplifies theBelkin commitment to delivering high-quality, durable products at areasonable price. Designed to give you control over multiple computers andservers from o...

Page 3 - Feature Overview

OVERVIEW 3 OVERVIEW 2 Direct-Access Port Selectors Direct-access port selectors, located conveniently on the front faceof the Switch, allow for simple, manual port-selection. Each buttoncontrols a port. The BANK scroll buttons located on the front panelof the Switch let you select daisy-chained swit...

Page 4 - Equipment Requirements; Cables; Operating Systems; OmniView SE Plus Series KVM Switches are for use on CPUs using:; Platforms; • DOS; Keyboards; • Microsoft system-compatible PS/2 wireless or optical mice; Monitor

5 OVERVIEW OVERVIEW 4 Equipment Requirements Cables To connect to the Switch, each PS/2 computer requires one VGA cable,one PS/2 keyboard cable, and one PS/2 mouse cable. Keyboard and mousecables must have PS/2 male-to-PS/2 male connectors. Each USB computerrequires one VGA cable and one USB A-to-B ...

Page 5 - Unit Display Diagrams; The Back of the OmniView SE Plus Series KVM Switch:

7 OVERVIEW OVERVIEW 6 Unit Display Diagrams Slave Input Master Input/Slave Output Direct-access port selector LED for selected portidentification Manual BANK scrollbuttons 7-segment LED for selected BANK identification AutoScan button Master Input/Slave Output Console VGA Computer VGA port Console P...

Page 6 - OVERVIEW; Mouse Input; Specifications are subject to change without notice.; Specifications; INSTALLATION; Where to Place the Switch

OVERVIEW 8 Part No.: F1DZ102T, F1DZ104T Power: 12V DC, 1A AC power adapter with center-pin positive polarity Daisy-Chain: Maximum of 4 KVM switches PCs Supported: 2 (F1DZ102T) 4 (F1DZ104T) Keyboard Emulation: PS/2 Mouse Emulation: PS/2 Monitor Supported: VGA, SVGA, MultiSync, and LCD (optional adapt...

Page 7 - Single KVM Switch Installation; Cautions and Warnings; Bracket Installation

INSTALLATION 11 Single KVM Switch Installation This section provides complete instructions for the hardware setup ofa single SE Plus Series KVM Switch. PS/2 Installation:Keyboard, Video, and Mouse Connections Connect the Console tothe KVM Switch 1. Connect your monitorcable to the HDDB15female port ...

Page 8 - USB Installation

INSTALLATION 13 USB Installation Boot the computer you wish to connect via USB as you would normallywith the keyboard, monitor, and mouse connected directly to thecomputer. After the operating system finishes loading, connect theSwitch to the USB computer using the USB A-to-B cable that is part ofyo...

Page 9 - DIP Switch Configuration Chart

INSTALLATION 15 DIP Switch Configuration Chart DIP SWITCH# BANK ADDRESS 1 2 3 4 5 6 ON ON ON ON ON ON BANK 00 MASTER (default) ON ON OFF ON ON ON BANK 01 SLAVE ON ON ON OFF ON ON BANK 02 SLAVE ON ON OFF OFF ON ON BANK 03 SLAVE Note: “On” is down position. Example: Four OmniView SE Plus Series KVM Sw...

Page 10 - Example of Daisy-Chain Configuration; Installation

INSTALLATION 17 Note: If the Switches do not enumerate correctly, reset the Master switch(BANK 00) by simultaneously pressing the “BANK Up” and “BANK Down”buttons. You can also reset the Master switch to detect newly added Slaveswitches. If the switches still do not enumerate correctly, check that a...

Page 11 - Hot Key Commands; Switch to previous BANK, Page Up; USING YOUR SWITCH; Selecting a Computer Using Direct-Access Port-Selectors

USING YOUR SWITCH 19 You can switch directly to any port by entering the two-digit BANK addressfollowed by the two-digit number of the port you wish to access. Forexample, if you press “Scroll Lock”, “Scroll Lock”, “00”, “02”, the Switchwill switch to the computer on port 2 located on BANK 00. Note:...

Page 12 - Connecting Computers; USING YOUR KVM SWITCH; AutoScan Mode

USING YOUR KVM SWITCH 21 Connecting Computers 1. Connect a keyboard, monitor, and mouse to the computer you prepared for firmware updates. It must run Windows XP, 2000, NT, 95, 98, or Me. 2. Connect the power adapter to the Switch. 3. Connect the custom flash cable (DB25 male-to-RJ45, included with ...

Page 14 - I am getting ghosting, shadowing, or fuzzy images on my monitor.; TROUBLESHOOTING

General My computer does not boot when connected to the Switch but works finewhen I connect the keyboard, video, and mouse directly to the computer. • Make sure that the keyboard and mouse cables are connected tightly between the Switch and the computer. • Check that the keyboard and mouse cables ar...

Page 15 - The computer boots up, but the mouse does not work.; USB; Keyboard; The mouse is lost when I switch to a different port.

TROUBLESHOOTING 27 The computer boots up, but the mouse does not work. • Make sure the mouse is plugged in properly. • Make sure the mouse works when directly plugged into the computer. Rebooting may be necessary when trying this. • Try a different mouse. When I switch from one port to another, mous...