Belkin F1DN104DEA - Manuals

3 1 2 3 4 5 6 7 section 3 Overview Other Features • USB Support The Switch is compatible with USB 1.1 and USB 2.0 technology and supports Plug-and-Play connectivity with USB computers, keyboards, and mice. • Dual-Link DVI Support The Switch supports video resolutions of up to 2560x1600. This include...

4 Overview Equipment Requirements Cables Belkin highly recommends you use Belkin DVI/USB KVM Cable Kits with Audio & Mic for your Switch to help ensure superior performance. These cables offer the highest quality possible to ensure optimal data and audio video transmission. One Cable Kit is requ...

5 1 2 3 4 5 6 7 section Overview System Requirements Operating-System (OS) Platforms The Switch is compatible with computers running on, but not limited to, the following OS platforms: • Windows ® 2000 • Windows XP (Home/Professional)• Windows 2003 Server• Windows Vista ® • Red Hat ® Linux ® Desktop...

66 Overview Unit Display Diagrams Front View (F1DN104Dea model shown) Back View Tamper-Evident Seals Side View IMPORTANT NOTICE: There should be one tamper-evident seal on each side of the Switch enclosure (total of two seals). If both seals are visible and do not appear to be disrupted, your Switch...

7 1 2 3 4 5 6 7 section Overview Specifications Part No.: F1DN102Dea, F1DN104Dea Enclosure: Metal enclosure with high-impact plastic faceplate Power Requirements: 5V DC, 3A (minimum) power adapter with center-pin-positive polarity 4 AC Input: 100 to 240VAC Interchangeable AC Plugs: 4 (U.S., U.K., Eu...

8 Before you begin, please take a few minutes to register your product. This may assist Belkin in contacting you regarding important information regarding secure use of your product. You may register your product online by going to https://www.belkin.com/registration/. Pre-Configuration Where to pla...

10 10 10 Installation Step 2 Connecting the Console to the Switch (required) Warning: Before attempting to connect anything to the Switch or your computers, please ensure that all computer equipment and devices are powered off. Plugging and unplugging cables while computers are powered on may cause ...

11 1 2 3 4 5 6 7 section Installation Step 3 Connecting Computers to the Switch (required) 3.1 Make sure all computers and the Switch are powered off. 3.2 Using the Belkin DVI/USB KVM Cable Kit (F1D9201b-XX), connect the male DVI connector to the monitor port on your computer. Then connect the other...

12 Installation Step 4 Powering Up the Systems (required) 4.1 Power on the attached monitor. 4.2 Attach the power adapter to the DC power jack labeled “5V, 3A” on the back of the Switch. Only use the power adapter supplied with the Switch. (Refer to diagram below.) 4.3 Power on your computers. All c...

13 section 1 2 3 4 5 6 7 Using your Switch Selecting a Computer Using Port Selectors Now that you have connected your console and computers to the Switch, it is ready for use. You can select which computer you wish to control by pressing the corresponding port selector on the front of the Switch. Th...

14 Frequently Asked Questions What does NIAP Common Criteria validation to EAL 4 mean? To learn more about NIAP Common Criteria and EAL 4, visit http://www.niap-ccevs.org/cc-scheme/consumer-guidance.cfm. What do I do if I find that the tamper-evident seals on the Switch have been removed or disrupte...

15 1 2 3 4 5 6 7 section Frequently Asked Questions Does the Switch support Linux? Yes, the Switch works with Red Hat Linux and some Linux operating systems configured for USB support. Does the Switch support Microsoft ® IntelliMouse ® ? The Switch supports mice from Belkin, Microsoft, Logitech ® , ...

16 Keyboard The computer does not detect my keyboard, or my keyboard does not work when I switch computers or reboot. • Check that the keyboard you are using is connected properly to the Switch. • Check that the USB cable between the Switch and the computer is firmly connected. • Try connecting to a...

17 1 2 3 4 5 6 7 section Troubleshooting Mouse The computer does not detect my mouse, or my mouse does not work when I switch computers or reboot. • Check that the mouse you are using is connected properly to the Switch. • Check that the USB cable between the Switch and the computer is completely co...

Information 18 FCC Statement Declaration of Conformity with FCC Rules for Electromagnetic Compatibility We, Belkin International, Inc., of 501 West Walnut Street, Compton, CA 90220, declare under our sole responsibility that the products: F1DN102Dea, F1DN104Dea, to which this declaration relates: Co...

19 Information section 1 2 3 4 5 6 7 How to get service. To get service for your Belkin product you must take the following steps: 1. Contact Belkin International, Inc., at 501 W. Walnut St., Compton CA 90220, Attn: Customer Service, or call (800)-223-5546, within 15 days of the Occurrence. Be prepa...