Belkin F1D104-USB - Manuals

Belkin F1D104-USB – Manual in PDF format online.

Manuals:

Manual

Manual Belkin F1D104-USB

Summary

Page 2 - READ BEFORE INSTALLATION; Do

Belkin ComponentsF1D104-USB - OMNIVIEW     SE 4-Port READ BEFORE INSTALLATION Tech Notes: 1) Windows 98/98 SE systems o HID (Human Interface Device) driver must be installed prior to using the USB KVM switch. To install the HID driver, first connect a USBkeyboard and mice directly to computer (b...

Page 3 - Introduction

Thank you for purchasing the Belkin Components ® 4-Port USB KVM Switch! Now you can control up to four differentUSB computers on any operating system! With exclusiveTime-Delay Technology, USB switching is seamless and error-free. The built-in USB to PS/2 converter allows users to workon a standard P...

Page 4 - Package Contents; • This manual

Package Contents 2 • 4-Port USB KVM Switch F1D104-USB • 12VDC, 1.6A switching power adapter • This manual • Registration card P73428-F1D104-USB-man.qxd 6/14/00 11:02 AM Page 2

Page 5 - Product Detail; Front View; LED Port Indicators

Product Detail 3 Front View Rear View LED Port Indicators Select Button Four Downstream USB Ports PS/2 Keyboard& Mouse Ports VGA Connectors to Computers DC Power Jack Monitor Connector Reset Button Four Upstream USB Connectors to Computers P73428-F1D104-USB-man.qxd 6/14/00 11:02 AM Page 3

Page 6 - Installation Instructions; Rear View USB KVM

Installation Instructions Please follow these instructions carefully to ensure propersystem functionality. Do not power down any of your computers, and donot unplug any PS/2 or USB keyboard or mouse devicejust yet. Doing so may cause you unnecessary rebootsand other hassles . First, connect your mon...

Page 7 - Front View USB KVM; USB Mouse; when it starts detecting the USB KVM Switch components.

PC SERIAL USB 1 USB 2 VGA MONITOR A T KEYBOARD PS/2 MOUSE PS/2 KEYBOARD P A RALLEL RJ45 NETWORK A T SERIAL Installation Instructions (continued) 5 Omni View USBKVMS WITCH Front View USB KVM PS/2 Mouse USB Mouse PS/2 Keyboard Connect the other ends of the USB KVM Cable to theappropriate ports at the ...

Page 8 - NEXT

Installation Instructions (continued) 6 Once you have plugged in the USB cable, Windows ® will detect the built-in 4-port hub, PS/2 Keyboard, and Mouse I/F. Even ifWindows ® asks for drivers, the drivers are built in. The USB KVM uses standard HID-Class (Human Interface Device) drivers. So allyou ne...

Page 9 - Make sure no boxes are checked. Click

Installation Instructions (continued) 7 Make sure no boxes are checked. Click NEXT Click NEXT You’re done! Click FINISH . P73428-F1D104-USB-man.qxd 6/14/00 11:02 AM Page 7

Page 10 - Connecting a Macintosh; Once you have plugged in the USB cable, Macintosh

Installation Instructions (continued) 8 Connecting a Macintosh ® to the USB KVM Switch Using a USB KVM Cable Kit (Belkin F3X1895-XX), connect the VGAand USB cables to an empty port at the back of the USB KVM. Connect the other ends of the USB KVM Cable to theappropriate ports at the back of your Mac...

Page 11 - Usage; Connecting USB Devices to the built-in 4-Port hub

Usage Connecting USB Devices to the built-in 4-Port hub When you connect any USB device to the 4-port hub, thatdevice will be switched when you switch computers. Forinstance, a USB Camera will be connected to computer 2 whenyou switch from computer 1 to computer 2. This is fine formany devices, but ...

Page 12 - SELECT

Usage (continued) 10 The SELECT Button: Omni View USBKVMS WITCH Pressing the SELECT button cycles you through all the ports, including inactive ports. Keyboard hot key commands (REQUIRES PS/2 KEYBOARD): You can also conveniently command the USB KVM to switchports through simple keyboard key sequence...

Page 13 - Enable AutoScan mode; Enable the On-Screen Display menu

Usage (continued) 11 AutoScan Mode: To enable AutoScan mode, press [SCROLL LOCK] [SCROLL LOCK] [0]. In AutoScan mode, the USB KVM remainson one port for a number of seconds, before switching to thenext. This time interval is set in the On-Screen Display menu. NOTE: There is no mouse or keyboard cont...

Page 14 - ” indicates

Usage (continued) 12 The main On-Screen Displaymenu is shownon the right. Itshows thecurrently selectedBANK. If you have onlyone USB KVM, it will say “BANK 0”. The currentselected port isshown in RED. The currentselectedport isshown in RED. “ ✹ ” indicates that thecomputerconnectedto that portis pow...

Page 17 - Troubleshooting; Check the cables and make sure they are inserted properly.

Troubleshooting 15 Monitor/Video Problems: Q: I am getting ghosting, shadowing, or fuzzy images on my monitor. A: • Check the cables and make sure they are inserted properly. • Your resolution and/or refresh rate is extremely high, or your cable is too long. Replace your VGA cables withcoaxial doubl...

Page 18 - Information; FCC Statement; DECLARATION OF CONFORMITY WITH FCC RULES FOR; CE Declaration of Conformity

Information FCC Statement DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY We, Belkin Components, of 501 West Walnut Street, Compton CA 90220,declare under our sole responsibility that the product: F1D104-USB to which this declaration relates:Complies with Part 15 of the FC...

Page 19 - Belkin Components

Belkin Components B.V. Diamantlaan 8 • 2132 WV Hoofddorp • The Netherlands Tel: +31 (0) 235698765 Fax: +31 (0) 235612694 Belkin Components, Ltd. Unit 13 • Gatelodge Close • Round Spinney Northampton • Northants • NN3 8RX United Kingdom Tel: +44 (0) 1604678300 Fax: +44 (0) 1604678330 Belkin Component...