Barco R9000893 - Manuals - manualsarea.com

Page 2 - BARCO PROJECTION SYSTEMS; GRAPHICS

BARCO PROJECTION SYSTEMS Date :220197 Art. No. : R5975847 GRAPHICS 1208s R9000893R9000896 OWNER'S MANUAL

Page 3 - Printed in Belgium

Due to constant research, the information in this manual is subject to change without notice. Produced by BARCO NV, January 1997.All rights reserved. Trademarks are the rights of their respective owners. Printed in Belgium BARCO nv/Projection SystemsNoordlaan 5B-8520 KuurneBelgium Printed in Belgium

Page 4 - Table of Contents

Table of Contents i-1 5975847 BARCOGRAPHICS 1208S 220197 Table of contents ........................................................................................................................................................................... i Safety instructions ..................................

Page 6 - Safety Instructions; WARNING; FEDERAL COMMUNICATION COMMISSION (FCC STATEMENT); On safety; WARNING FOR THE CUSTOMERS; SAFETY INSTRUCTIONS; Notice on Safety; Before operating this equipment please read this manual; OWNER’S RECORD

Safety Instructions 1-1 5975847 BARCOGRAPHICS 1208S 220197 WARNING TO PREVENT FIRE OR ELECTRICAL SHOCK HAZARD, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE FEDERAL COMMUNICATION COMMISSION (FCC STATEMENT) This equipment has been tested and found to comply with the limitsof a class A digital devi...

Page 7 - On installation; Refer all servicing to qualified service personnel.; On cleaning

Safety Instructions 1-2 5975847 BARCOGRAPHICS 1208S 220197 A. Mains lead (Power cord) with CEE 7 plug : The wires of the mains lead are colored inaccordance with the following code. Green and yellow: earth (safety earth) Blue: neutral Brown: line (live) B. Power cord with ANSI 73.11 plug : The wires...

Page 8 - Location and Functions of Control; LOCATION AND FUNCTION OF CONTROLS; REAR PANEL TERMINOLOGY

Location and Functions of Control 2-1 5975847 BARCOGRAPHICS 1208S 220197 2 LOCATION AND FUNCTION OF CONTROLS REAR PANEL TERMINOLOGY Communication Port (800 peripherals) * allows communication between the RCVDS switcher andthe projector.* allows connection of a remote IR receiver unit to theprojector...

Page 9 - b. RCU control panel terminology

Location and Functions of Control 2-2 5975847 BARCOGRAPHICS 1208S 220197 b. RCU control panel terminology This remote control includes a battery powered infrared (IR) transmit-ter that allows the user to control the projector remotely.This remote control is used for source selection, control, adapta...

Page 10 - Connections; CONNECTIONS; Power Check; Stand by indication lamp :

Connections 3-1 5975847 BARCOGRAPHICS 1208S 220197 hm ON T 1 EO) PROJECTOR MODE POWER/MAINS PORT 2 (S-VIDEO) 75 ohm ON OFF GREEN : operationalRED : stand-by 352 3 CONNECTIONS AC Power (mains) Cord Connection Use the supplied power cord to connect your projector tothe wall outlet. Plug the female pow...

Page 11 - The way of starting up can be set in the service mode.; Start up with full white image.; The next menu will be displayed for 30 seconds.; EXIT; immediately ready for use.; Signal Input Connection to the Projector :; RGB

Connections 3-2 5975847 BARCOGRAPHICS 1208S 220197 PRO J E CTO R WAR M UP A FULL WHITE PA TTE RN WILL BE GE NE RATED FOR 20 MINUTE S. FOR IMMEDIATE USE OF THE P ROJECTOR, PRE SS <EXIT>. WA RNING : SKIPPING THIS PROCE DURE CAN REDUCE THE INITIAL PICTURE QUALITY OF THE PROJE CTED IMAGE. THIS OP ...

Page 12 - Connecting a Composite Video source to port 1.; Video input selection :; with the RCU or the build in RCU : press digit button 1; Connecting a S-Video or Video source to port 2.; ENTER; pin connector configurations:

Connections 3-3 5975847 BARCOGRAPHICS 1208S 220197 Connecting a Composite Video source to port 1. Video input selection : with the RCU or the build in RCU : press digit button 1 * Note : if using the loop-through Video output, then set theTermination Switch to the "OFF" position. Connecting ...

Page 13 - Connecting a RGB Analog source to port 3.; Analog Input Selection :; Connecting a RGB Analog source to port 4/5.; RGB input selection :

Connections 3-4 5975847 BARCOGRAPHICS 1208S 220197 Connecting a RGB Analog source to port 3. Connect your RGB source via an interface to Port 3.Always use an interface when a computer and local monitor have tobe connected to the projector. Barco interfaces which can be applied :Universal analog inte...

Page 14 - with the RCU or the build in RCU : press digit button 7; with the RCU or the build in RCU : press digit button 6.; To select the component video input :; with the RCU or the build in RCU : press digit button 8.

Connections 3-5 5975847 BARCOGRAPHICS 1208S 220197 Connecting a RGB Analog source with Tri-levelsync to port 4/5.(option) RGB analog input terminals with Tri level sync input orwith Tri-level sync on green. The projector detectsautomatically where the sync signal is located. RGB input selection : (R...

Page 15 - PERIPHERAL EQUIPMENT; - Up to 20 inputs with the RCVDS 05 switcher and up to 90 inputs

Connections 3-6 5975847 BARCOGRAPHICS 1208S 220197 PERIPHERAL EQUIPMENT Connecting a RCVDS 05 switcher to theBARCOGRAPHICS 1208s - Up to 20 inputs with the RCVDS 05 switcher and up to 90 inputs when 10 RCVDS switchers are linked via the expansion modules. - Serial communication with the projector.- ...

Page 16 - Controlling; CONTROLLING; Battery installation in the RCU.; Battery

Controlling 4-1 5975847 BARCOGRAPHICS 1208s 220197 4 CONTROLLING Caution : Do not display a stationary image with full brightnessand contrast for longer than 20 min., otherwise you risk damageto the CRT's. Battery installation in the RCU. A new battery (not yet installed to save the battery life) is...

Page 17 - The BARCOGRAPHICS 1208s can be controlled with; How to use your RCU; a) Point the front of the RCU towards the reflective screen surface; Projector Address; a. hardware set up of the projector address.; addresses between 0 and 255.

Controlling 4-2 5975847 BARCOGRAPHICS 1208s 220197 The BARCOGRAPHICS 1208s can be controlled with a. the RCUb. the hardwired RCU (cable not included)c. the built-in RCU (local keypad) The procedure and results of controlling the projector with either ofthese RCU options is essentially the same. How ...

Page 18 - Port No; How to display a projector address?

Controlling 4-3 5975847 BARCOGRAPHICS 1208s 220197 Port No Projector input Press DigitButton 1 Comp. Video 1 2 S-Video 1 /Comp. Video* 2 3 RGB 2 3 4/5 RGB 2 4 or 5 4/5 Component video 3 6 4/5 RGB with Tri level sync 4 7 4/5 Component videowith Tri-level sync 5 8 How to display a projector address? P...

Page 19 - Analog Picture Controls; Controlling chained projectors.

Controlling 4-4 5975847 BARCOGRAPHICS 1208s 220197 Analog Picture Controls The analog picture controls can be adjusted with the RCU. The control keys arelocated on the lower right side of the key panel of the RCU and indicated with the nameof the control and an icon.When an analog picture control is...

Page 20 - Start Up of the Adjustment Mode; START UP OF THE ADJUSTMENT MODE; Adjustment Mode; Warning during the start up of the installation mode.

Start Up of the Adjustment Mode 5-1 5975847 BARCOGRAPHICS 1208S 220197 5 START UP OF THE ADJUSTMENT MODE Adjustment Mode All picture geometry and convergence adjustments are made while in the 'Adjustment mode'. Press the ADJUST key to enter the 'adjustmentmode'. You are now in the 'Adjustment mode'....

Page 21 - Enter the digits with the numeric keys on the RCU.

Start Up of the Adjustment Mode 5-2 5975847 BARCOGRAPHICS 1208S 220197 Some items in the Adjustment mode are password protected. While selecting suchan item, the projector asks you to enter your password. (Password protection isonly available when the password DIP switch on the controller module is ...

Page 22 - Random Access Adjustment Mode; RANDOM ACCESS ADJUSTMENT MODE; Starting-Up the Random Access Adjustment mode.

Random Access Adjustment Mode 6-1 5975847 BARCOGRAPHICS 1208S 220197 6 RANDOM ACCESS ADJUSTMENT MODE Starting-Up the Random Access Adjustment mode. Push the control stick forward or backward to highlight "RANDOM ACCESS" andthen press ENTER . Some items in the Random access mode are password ...

Page 24 - Selecting Setup Pattern

Random Access Adjustment Mode 6-3 5975847 BARCOGRAPHICS 1208S 220197 Selecting Setup Pattern If an external source is connected to the projector, this menu will be displayed. Push thecontrol stick forward or backward to highlight the desired setup pattern and then press ENTER . Genlocked pattern : i...

Page 25 - to display the desired color balance.; to start the adjustment.; returns to the Picture tuning menu.; Random access adjustment mode selection menu.; For RGB analog sources :; Color Balance

Random Access Adjustment Mode 6-4 5975847 BARCOGRAPHICS 1208S 220197 Select with or then <ENTER> <EXIT> to return. RANDOM ACCESS ADJUSTMENT MODE PICTURE TUNING GEOMETRY CONVERGENCE FOCUSING COLOR SELECT ORBITING CONTR. MODULATION SOFT EDGE Select with or <ENTER> to accept <EXIT&...

Page 26 - Clamp Tuning; Peaking

Random Access Adjustment Mode 6-5 5975847 BARCOGRAPHICS 1208S 220197 Sync Fast/Slow Adjustment The sync function is used to minimize horizontal jittering or tearing atthe top to the displayed image.Highlight SYNC by pushing the control stick forward or backwardand press ENTER to toggle between FAST ...

Page 27 - Color Select

Random Access Adjustment Mode 6-6 5975847 BARCOGRAPHICS 1208S 220197 Port 2 : Video or S-Video Port 2 can be used as a Video or S-Video input.Highlight Port 2 by pushing the control stick forward or backward andpress ENTER to toggle between VIDEO and S-VIDEO. Select with or <ENTER> to accept &...

Page 28 - Focusing

Random Access Adjustment Mode 6-7 5975847 BARCOGRAPHICS 1208S 220197 Focusing Before starting the 'focusing' adjustment, be sure the lenses arecorrectly focused.Push the control stick forward or backward to select 'Focusing' andpress ENTER . Select with or then <ENTER> <EXIT> to return. ...

Page 29 - Geometry Adjustments; Horizontal Phase Adjustment

Random Access Adjustment Mode 6-8 5975847 BARCOGRAPHICS 1208S 220197 Geometry Adjustments The geometry adjustments have to be done only on the green image. These adjustments are automatically implemented for the other colorimages : Left-right (EW) and Top-Bottom Corrections, Blanking, Horizontal Amp...

Page 30 - CAUTION; Warning; : In order to ensure maximum CRT longevity and to; forbidden area; projected raster; phosphor border

Random Access Adjustment Mode 6-9 5975847 BARCOGRAPHICS 1208S 220197 Raster Shift Adjustment The green raster must be centered both horizontally and vertically onthe center of the CRT surface. To center the green raster, look intothe green lens and use the control stick to move the raster. CAUTION I...

Page 31 - will select Left-Right adjustment menu; to activate this function.

Random Access Adjustment Mode 6-10 5975847 BARCOGRAPHICS 1208S 220197 Left-Right (east-west) Adjustments Left-right adjustments affect only the vertical lines of the projectedimage. Only the green image is displayed while making left-rightadjustments. The red and blue images will automatically be co...

Page 32 - Left Side Correction; will select the Left Side Correction menu.

Random Access Adjustment Mode 6-11 5975847 BARCOGRAPHICS 1208S 220197 Seagull correction Use this correction only if, after adjusting the vertical lines with the sidebow or side keystone, still a 'S' deformation is visible on the left andthe right side of the image.The default value on the bar scale...

Page 33 - The following adjustments can be executed :

Random Access Adjustment Mode 6-12 5975847 BARCOGRAPHICS 1208S 220197 Top-Bottom (north-south) Adjustments Top-Bottom and center adjustments affect only the horizontal lines ofthe projected image.To start up the Top-Bottom and center corrections, follow the nextprocedure : Push the control stick for...

Page 34 - Horizontal Size Adjustment

Random Access Adjustment Mode 6-13 5975847 BARCOGRAPHICS 1208S 220197 Seagull Correction Use this correction after the image has been adjusted with top andbottom bow and keystone. If still a deformation (like a seagull) on topand bottom of the image is visible, proceed to the seagull correction.Due ...

Page 35 - Vertical Linearity Adjustment; EXIT will return to the Geometry menu; Vertical Size Adjustment; - if the internal # pattern was selected, this pattern remains on the; EXIT will return to Geometry

Random Access Adjustment Mode 6-14 5975847 BARCOGRAPHICS 1208S 220197 Vertical Linearity Adjustment The vertical linearity adjustment function corrects for vertical non-linearities which extend from the center of the image to the top andbottom of the image.Push the control stick forward or backward ...

Page 36 - Blanking Adjustments; To start up the Blanking adjustments, follow the next procedure :; The following blanking corrections are possible :; Press EXIT to return.

Random Access Adjustment Mode 6-15 5975847 BARCOGRAPHICS 1208S 220197 Blanking Adjustments Blanking adjustments affect only the edges of the projected imageand are used to frame the projected image on to the screen and to hideor black out unwanted information (or noise). A 0% on the bar scaleindicat...

Page 37 - Convergence Adjustment; The screen area is divided into 25 areas.; Coarse Convergence Adjustment.; - Vertical corners : adjust the horizontal lines in the four corners,; Horizontal sides

Random Access Adjustment Mode 6-16 5975847 BARCOGRAPHICS 1208S 220197 Convergence Adjustment Convergence adjustments affect both the horizontal and verticallines of the setup pattern. These adjustments are performed on thered image while superimposed on the green image and then on theblue image whil...

Page 38 - Vertical corners; or as close as possible to the green lines.; Fine Convergence Adjustment.

Random Access Adjustment Mode 6-17 5975847 BARCOGRAPHICS 1208S 220197 Vertical corners Highlight 'Vertical corners' and press ENTER to start the adjustment.To make a coarse adjustment of the red or blue horizontal lines inzone 10, 14, 18 and 22 simultaneously. Select with or then <ENTER> <E...

Page 39 - Service Mode; Starting up the Service mode.

Service Mode 7-1 5975847 BARCOGRAPHICS 1208S 220197 Starting up the Service mode. Use the control stick to highlight 'Service' and then press ENTER . Some items in the Service mode are password protected (when thepassword function is active). Enter your password to continue. Allother password protec...

Page 40 - Identification

Service Mode 7-2 5975847 BARCOGRAPHICS 1208S 220197 Identification Highlight 'Identification' with the control stick and press ENTER . The 'Identification' screen gives information concerning : - projector address. To change the address of your projector, contact a qualified service technician. - so...

Page 41 - Deletion of blocks; Deleting block by block; Deletion of all blocks

Service Mode 7-3 5975847 BARCOGRAPHICS 1208S 220197 Deletion of blocks This item is password protected.The delete function is used to clear all data (settings) from anadjustment block.A delete can be given : - block by block or - for all blocks. Deleting block by block The delete a block function de...

Page 42 - Change password; Run time

Service Mode 7-4 5975847 BARCOGRAPHICS 1208S 220197 Change password This item is password protected.Highlight 'change password' with the control stick and press ENTER . The current password is displayed. The new password must consistof 4 digits between 0 and 9. Push the control stick to the left or ...

Page 43 - Set to midposition; will set all settings to their midposition.; Undo Midposition; sets the convergence settings to their midposition.

Service Mode 7-5 5975847 BARCOGRAPHICS 1208S 220197 Set to midposition Item is password protected.Highlight 'set to midposition' with the control stick and press ENTER to set all settings to their midposition.A confirmation menu will be displayed first. Select with or then <ENTER> <EXIT>...

Page 44 - Dynamic Astigmatism (spot shape adjustment); EXIT returns to the path selection main menu.

Service Mode 7-6 5975847 BARCOGRAPHICS 1208S 220197 When undo is pressed all convergence settings are reset to theprevious settings. Dynamic Astigmatism (spot shape adjustment) The spot shape adjustments correct the spot shape in 8 differentareas on the screen and that for the three colors separatel...

Page 45 - G2 Adjust; Gamma corrections; CRT run in cycle

Service Mode 7-7 5975847 BARCOGRAPHICS 1208S 220197 Use the up and down arrow keys for the diagonal astigmatismadjustment and the left and right arrow keys for the axial astigmatismadjustment. Press ENTER to continue selecting a new area.The adjustment direction (axial or diagonal) and adjustment va...

Page 46 - Projector Warm Up; to select the projector warm up menu.; The ON/OFF option can be toggled with the; CRT Drive Mode; The following modes are available :

Service Mode 7-8 5975847 BARCOGRAPHICS 1208S 220197 Projector Warm Up Highlight 'Projector Warm Up' by pushing the control stick forward orbackward and press ENTER to select the projector warm up menu. Select with or then <ENTER> <EXIT> to return. SERVICE MODE G2 ADJUSTMENT GAMMA CORRECT...

Page 47 - Messages, warnings and failure codes; MESSAGES, WARNINGS AND FAILURE CODES; End of adjustment range.

Messages, warnings and failure codes 8-1 5975847 BARCOGRAPHICS 1208S 220197 8 MESSAGES, WARNINGS AND FAILURE CODES SOURCE 01Fh= 15.6 kHzFv= 050 Hz SOURCE 01Fh= 15.6 kHzFv= 050 Hz Announcement of the selectedsource. enter password xxxx Message to enter your password.Password contains 4 digits. text o...

Page 49 - Options; OPTIONS; shield; Preparing your remote cable :; Projector Control software; Remote Control Simulation. Advantage : address range 0 to 255.; RCVDS 05 Source Selector

Options 9-1 5975847 BARCOGRAPHICS 1208S 220197 IR Receiver 800 This infrared receiver unit makes it possible to control theBARCOGRAPHICS 1208S from another room.There is a communication line with cable between the IR receiver andthe projector or the RCVDS05. The control information from the RCUcan n...

Page 50 - MAGIK Interface; Order numbers MAGIK with cables and case :; Adapter and communication cables; - To connect a IR receiver to the RCVDS800 or RCVDS05 or to the; Ceiling Mount kit CM100

Options 9-2 5975847 BARCOGRAPHICS 1208S 220197 MAGIK Interface Multifuctional Analog Graphics Interface Kit.BARCO's MAGIK interface allows the user to connect a presentationdevice such as a projector or a professional monitor to any computerwith analog video signal with or without maintaining the co...

Page 51 - Orbiting; ORBITING; Orbiting Mode Toggle Switches

Orbiting A-1 5975847 BARCOGRAPHICS 1208S 220197 A ORBITING Orbiting (option) Static pictures are very often shown on large screen projectors,espectially in process control and presentation applications. Due tothe fact that the same picture information is shown for a long periodon the same place, pic...

Page 52 - Orbiting Alignment

Orbiting A-2 5975847 BARCOGRAPHICS 1208S 220197 Orbiting Speed Toggle (only in MASTER Orbiting) Highlight 'SPEED : SLOW' with the control stick and press ENTER to set the ORBITING SPEED to Fast.Highlight 'SPEED : FAST' with the control stick and press ENTER to set the ORBITING SPEED to Slow <EXIT...

Page 54 - Adjustment Blocks and Source Numbers 90-99; Block Header

Adjustment Blocks and Source Numbers 90-99 B-1 5975847 BARCOGRAPHICS 1208S 220197 Adjustment Blocks (memory blocks) As the projector is digitally controlled, all geometry and convergence adjustments are stored in the projector’s memory as numericvalues. These numeric values are used to control digit...

Page 55 - Insert Card; INSERT CARD

Insert Card i-1 5975847 BARCOGRAPHICS 1208S 220197 P RCU INPUT SOURCES 1 PROJECTOR RCVDS 2 3 4 5 6 1 2 3 5 6 7 8 9 10 INPUT SOURCES 7 P RCU INPUT SOURCES 1 PROJECTOR RCVDS 2 3 4 5 6 1 2 3 5 6 7 8 9 10 INPUT SOURCES 7 INSERT CARD "