Page 2 - Contents
Contents Safety instructions ............................................................................................... 5 1. Overview ......................................................................................................... 6 1.1. Introduction ......................................
Page 4 - SAFETY INSTRUCTIONS
User manual MFGD 2320 3 Read the safety and operating instructionsbefore operating the apparatus.Retain safety and operating instructions forfuture reference.Adhere to all warnings on the apparatus andin the operating instructions manual.Follow all instructions for operation and use. This apparatus ...
Page 5 - Autoset feature
User manual MFGD 2320 4 1. OVERVIEW 1.1. Introduction The MFGD 2320, BARCO’s 20” 2 megapixel grayscale LCD display,guarantees perfect image quality in medical imaging applications. The display combines a TFT (thin film transistor) liquid crystal displaypanel structure and a built-in backlight with i...
Page 6 - Best resolution
User manual MFGD 2320 5 Best resolution The optimum and recommended resolution is 1600 x 1200 or 1200 x1600 (if the Portrait Accelerator option is installed). The recommended refresh rate is 60 Hz. Would you have trouble selecting a proper display setting inWindows, please refer to the Troubleshooti...
Page 7 - Side; Front
User manual MFGD 2320 6 1 2 Side (3) USB downstream connector (4) Control wheel for navigating through the on-screen display (OSD) menus and changing values in the menus 43 1.3. Controls and connectors Front (1) Ambient Light Compensation (ALC) sensor (2) Power LED - The LED is off when the display ...
Page 8 - Rear
User manual MFGD 2320 7 Rear (5) Digital DVI (video and data) input (6) D15 (VGA) video connector (7) Vertical sync input (8) Composite / Horizontal sync input (9) Composite video input (10) USB downstream connector (11) USB upstream connector (12) DC 12V power input D 15 D V I VI D E O C S/ H S VS ...
Page 10 - To connect DVI signals:
User manual MFGD 2320 9 2.3. Portrait or landscape position You can change the orientation of the panel at any time, but it is moreconvenient to select landscape or portrait orientation before connectingthe cables. To change the panel orientation: 1 Stand at the front side of the panel and take the ...
Page 14 - OPERATION; About the on-screen menus
User manual MFGD 2320 13 3. OPERATION 3.1. Switching to stand-by position When the display is on and no on-screen menus are visible, press thecontrol wheel (4) for a few seconds to switch the display in stand-by. When the display is in stand-by, press or turn the control wheel toswitch it back on. 3...
Page 15 - Saving changes
User manual MFGD 2320 14 • To browse or scroll through the menus on the current level, turn thewheel clockwise or counterclockwise. • To enter into a menu or move to a lower level of the menustructure, turn the control wheel to select the desired menu. Next,click the wheel shortly. • To exit from a ...
Page 16 - When do you need to use the Autoset functions?; Required test pattern
User manual MFGD 2320 15 3.3. Using the Autoset* functions * Not in DVI mode The Autoset menu provides a set of functions to adjust the displayautomatically. When do you need to use the Autoset functions? It is necessary to perform the Auto Gain and Auto Phase calibrations inthe following cases: • T...
Page 17 - The Autoset menu contains the following items:
User manual MFGD 2320 16 2 Click the control wheel. The Autoset menu appears. AUTOSET Full Autoset Automatic Geometry Automatic Phase Automatic Gain EXIT 3 Turn the control wheel to select the function you wish to execute. 4 Execute the function as described below. The Autoset menu contains the foll...
Page 19 - How to make the adjustments?
User manual MFGD 2320 18 3.5. Setting the Luminance value With this function, the backlight value is stabilized by the I-Guardsensor. The value you enter is the target backlight luminance, ex-pressed in Cd/m². Proceed as follows: 1 In the main menu, turn the control wheel to select the Luminance men...
Page 20 - Geometry adjustments
User manual MFGD 2320 19 2 Click the control wheel. The Adjustments menu appears. ADJUSTMENTS Geometry Phase* EXIT * Not in DVI mode 3 Turn the control wheel to select the adjustment menu you wish to enter: Geometry or Phase. 4 Click the control wheel to enter the menu. 5 Turn the control wheel to s...
Page 21 - To enter the Inputs menu:
User manual MFGD 2320 20 Phase adjustments* * Not in DVI mode Required test pattern To obtain good results, it is necessary to have a good image on whichto perform the functions. For the Phase adjustments, the pattern should contain sharp black-white transitions, like a line pattern or characters. T...
Page 22 - You can select the following input selection settings:
User manual MFGD 2320 21 2 Click the control wheel. The Input Selection control appears. 3 Turn the wheel to select the desired input setting. 4 Click the wheel to activate the input selection and return to the main menu. You can select the following input selection settings: Auto .....................
Page 23 - The Settings menu contains the following items:
User manual MFGD 2320 22 3 Turn the wheel to select the desired menu item. 4 Perform the settings as described below. The Settings menu contains the following items: DPMS .......................... Click the control wheel to switch on/off the automatic power saving system (DPMS) Power LED .............
Page 24 - The Scan Mode menu contains the following items:; Getting information; To enter the Information menu:
User manual MFGD 2320 23 MFGD 2320 MAIN MENU Autoset Video Contrast* Video Brightness* Luminance Adjustments Input Selection Auto Settings Scan Mode Information EXIT * Not in DVI mode 2 Click the control wheel. The Scan Mode menu appears. 3 Turn the wheel to select the desired menu item. 4 Perform t...
Page 25 - The General Information menu contains the following items:
User manual MFGD 2320 24 MFGD 2320 MAIN MENU Autoset Video Contrast Video Brightness Luminance Adjustments Input Selection Auto Settings Scan Mode Information EXIT 2 Click the control wheel. The Information menu appears. You can select to view General information or Current Input Formatinformation. ...
Page 26 - ADVANCED FUNCTIONS; Important; About the Advanced functions
User manual MFGD 2320 25 4. ADVANCED FUNCTIONS 4.1. About this chapter Important The functions described in this chapter are intended for trained servicestaff only! Improper use of these functions may disorder the display. BARCOcannot be held responsible for the results or damage caused byimproper u...
Page 27 - Ambient Light Compensation
User manual MFGD 2320 26 4.2. Advanced functions in the Adjustmentsmenu Ambient Light Compensation Ambient Light Compensation is sometimes abbreviated to ALC. SeeIntroduction. The Ambient Light Compensation menu contains the following items: Min ALC .................. Contains two functions to set t...
Page 28 - Advanced functions in the Settings menu; Lookup Table; If you select None, no LUT will be selected.; Input Mode; Standard input mode
User manual MFGD 2320 27 4.3. Advanced functions in the Settings menu The Settings menu contains the following advanced functions: Lookup Table The display contains a number of factory-defined and user-definedLookup Tables (LUTs). Turn the control wheel to select a LUT. - Select a DICOM lookup table...
Page 29 - Extended input mode
User manual MFGD 2320 28 G->Y ........................ The Green video signal from the imaging board is used as luminance value to drive the RGBsubpixels of the panel equally. B->Y ........................ The Blue video signal from the imaging board is used as luminance value to drive the RGB...
Page 30 - OSD position; Advanced functions in the Scan Mode menu; Autoscan; Reset All; Advanced functions in the Information menu; Service
User manual MFGD 2320 29 OSD position With the OSD function you can select where on the screen the OSDmenu text will appear. You can select between center position, top left,top right, bottom left or bottom right. 4.4. Advanced functions in the Scan Mode menu The Scan Mode menu contains the followin...
Page 31 - Firmware; Runtimes; MAINTENANCE; Panel
User manual MFGD 2320 30 Firmware The Firmware information menu contains the following items: Boot Code Version ....... The version of the internal boot code Run Code Version ........ The version of the internal run code CPLD Code Version ..... The version of the internal CPLD code FPGA Version .......
Page 32 - ING
User manual MFGD 2320 31 It may be possible that dust particles have entered the display and arestuck to the rear of the glass. We recommend to let this cleaning procedure be done in a BARCOservice center. However, when really necessary, you can perform the cleaning on siteif you can work in conditi...
Page 33 - Pixel Faults; TECHNICAL SPECIFICATIONS; GEOMETRY
User manual MFGD 2320 32 Information: The display contains a special memory chip that contains informationabout the display's scanning capabilities. When Windows starts up, itreads the contents from this memory and presents a number of displaysettings in the Display Properties control panel, based o...
