Barco MFGD 3220 D - Manuals

Page 2 - SAFETY INSTRUCTIONS

• R e a d t h e s a f e t y a n doperating instructions beforeoperating the apparatus.• Retain safety and operatingi n s t r u c t i o n s f o r f u t u r ereference.• Adhere to all warnings onthe apparatus and in theo p e r a t i n g i n s t r u c t i o n smanual.• Follow all instructions foroperat...

Page 4 - CONTENTS

MFGD 3220D User's Guide 5 CONTENTS 1. Overview ......................................................................................................... 7 1.1 Introduction ............................................................................................... 71.2 Package contents .............

Page 6 - MediCal Pro; Multi-scan capabilities

MFGD 3220D User's Guide 7 1. OVERVIEW 1.1 Introduction The MFGD 3220D, BARCO’s 21” 3 megapixelgreyscale LCD display, guarantees perfect imagequality in medical imaging applications. The display combines a TFT (thin film transistor)liquid crystal display panel structure and a built-inbacklight with i...

Page 7 - Controls and connectors

MFGD 3220D User's Guide 8 1.2 Package contents The package should include the following items,please check. If some of the items are missing,please contact the reseller you have purchasedthe unit from. - The MFGD 3220D display - 12V DC power supply - European power cord - American power cord - Video...

Page 10 - Portrait or landscape position

MFGD 3220D User's Guide 11 4 Pull the red strap out of the fixation holes inthe foot. You can better leave the cover off the foot whileconnecting the signal cables to the display. 2.3 Portrait or landscape position You can change the orientation of the panel at anytime, but it is more convenient to ...

Page 11 - Connecting the signals; To connect the power:

MFGD 3220D User's Guide 12 2.4 Connecting the signals To get access to the connectors, open the coverof the connector compartment by pulling down the2 clips of the cover. To connect the video & sync signals: 1 Connect one end of the video cable to theDVI input (5) of the display. 2 Connect the o...

Page 13 - Tilt and swivel positioning

MFGD 3220D User's Guide 14 2.6 Tilt and swivel positioning Adjust the position of the panel for best viewingconditions. The display foot allows adjusting the panel height,horizontal viewing angle and vertical viewingangle. 2.7 Starting up Proceed as follows: 1 Switch on the computer. 2 If necessary,...

Page 14 - CONTROLS; Brightness control

MFGD 3220D User's Guide 15 The control wheel (2) at the bottom (landscapeorientation) or at the side (portrait orientation)allows you to perform some controls. You canswitch the display in stand-by and control thebrightness. 3. CONTROLS 3.1 Stand-by switching When the display is on, depress the cont...

Page 16 - Pixel Faults

5. TROUBLESHOOTING Pixel Faults Permanently dark or bright pixels can happen toTFT displays. 20 or less permanently dead pixelsdo not make out a good case for exchanging theunit. Please contact our Customer Service Departmentif the number of pixel faults exceeds the above-mentioned figure.

Page 17 - TECHNICAL SPECIFICATIONS

6. TECHNICAL SPECIFICATIONS Picture panel20.8-inch diagonal viewable screen TFT (thin film transistor) active matrix,greyscale liquid crystal display ResolutionNative: 2048 x 1536 Display area (H x V)423.7 x 318 (mm) Viewing angle (@ 10/1 contrast)Vertical: 170ºHorizontal: 170º Input signalsPossible...