Page 3 - Trademarks
MatrixPRO-II 3G/HD/SD-SDI Routers Rev. 1.1 MatrixPRO-II HD/3G SDI Series –User’s Guide - Rev. 1.1 3 absence of properties guaranteed in writing or due to the intent or gross negligence or part of Barco. If the purchaser or a third party carries out modifications or repairs on goods delivered by Barc...
Page 4 - Company Address; Technical Support
MatrixPRO-II 3G/HD/SD-SDI Routers Rev. 1.1 MatrixPRO-II HD/3G SDI Series –User’s Guide - Rev. 1.1 4 Company Address Barco, Inc. 11101 Trade Center Drive Rancho Cordova, California 95670 USA Phone: (916) 859-2500 Fax: (916) 859-2515 Barco N.V. Noordlaan 5 8520 Kuurne BELGIUM Phone: +32 56.36.82.11 Fa...
Page 5 - Operators Safety Summary
MatrixPRO-II 3G/HD/SD-SDI Routers Rev. 1.1 MatrixPRO-II HD/3G SDI Series –User’s Guide - Rev. 1.1 5 Operators Safety Summary The general safety information in this summary is for operating personnel. Do not remove panels or covers There are no user-serviceable parts within the unit. Removal of the t...
Page 6 - Terms in This Manual and Equipment Marking; Warning; Caution
MatrixPRO-II 3G/HD/SD-SDI Routers Rev. 1.1 MatrixPRO-II HD/3G SDI Series –User’s Guide - Rev. 1.1 6 Terms in This Manual and Equipment Marking Warning Highlights an operating procedure, practice, condition, statement, etc., which, if not strictly observed, could result in injury to or death of perso...
Page 7 - Change History
MatrixPRO-II 3G/HD/SD-SDI Routers Rev. 1.1 MatrixPRO-II HD/3G SDI Series –User’s Guide - Rev. 1.1 7 Change History Date ECP # Description Approved By 0.0 5/20/10 578607 User’s Guide GKOU 1.1 3/09/11 586286 Added default IP address Added interface commands appendix Added MP-II 3G Configuration Tool G...
Page 8 - Contents
MatrixPRO-II 3G/HD/SD-SDI Routers Rev. 1.1 MatrixPRO-II HD/3G SDI Series –User’s Guide - Rev. 1.1 8 Contents 1.1 Product versions ..................................................................................................... 10 2 Specifications ...................................................
Page 9 - Appendix C Barco MPII-3G Configuration Tool
MatrixPRO-II 3G/HD/SD-SDI Routers Rev. 1.1 MatrixPRO-II HD/3G SDI Series –User’s Guide - Rev. 1.1 9 B.2 Request X-Point Status ....................................................................................................... 31 B.3 Router Ping .....................................................
Page 10 - Product overview; Product versions
MatrixPRO-II 3G/HD/SD-SDI Routers Rev. 1.1 MatrixPRO-II HD/3G SDI Series –User’s Guide - Rev. 1.1 10 Product overview This User Manual presents the features, installation and operation procedures of (3G/HD/SD-SDI) routers of the Barco MatrixPRO-II series. − Router models available: 8x8, 16x16 and 32...
Page 19 - disables the RS-232 port of that device.; disables the Ethernet port of that device.
MatrixPRO-II 3G/HD/SD-SDI Routers Rev. 1.1 MatrixPRO-II HD/3G SDI Series –User’s Guide - Rev. 1.1 19 3.5 Switching time Switching is performed according to the detected sync reference signal. Switching time is determined by the synchronization signal that feeds the router. This is useful when the vi...
Page 22 - Ethernet connection
MatrixPRO-II 3G/HD/SD-SDI Routers Rev. 1.1 MatrixPRO-II HD/3G SDI Series –User’s Guide - Rev. 1.1 22 5.2 Ethernet connection The connections follow the standard set by the IEEE 802.3 100BaseTX specification. The cables that are to be applied should be CAT-5 / CAT-5E standard, or better. It is the re...
Page 25 - Environmental Specifications
MatrixPRO-II 3G/HD/SD-SDI Routers Rev. 1.1 MatrixPRO-II HD/3G SDI Series –User’s Guide - Rev. 1.1 25 7 Environmental Specifications 1. The equipment will meet the guaranteed performance specification under the following environmental conditions: - Operating room temperature range: 0°C to 45°C - Oper...
Page 27 - Recycling information
MatrixPRO-II 3G/HD/SD-SDI Routers Rev. 1.1 MatrixPRO-II HD/3G SDI Series –User’s Guide - Rev. 1.1 27 A.2 Recycling information Please contact Barco’s Customer Support for assistance with recycling if this site does not show the information you require. Where it is not possible to return the product ...
Page 28 - A.3 Declarations of Conformity; DESCRIPTION
MatrixPRO-II 3G/HD/SD-SDI Routers Rev. 1.1 MatrixPRO-II HD/3G SDI Series –User’s Guide - Rev. 1.1 28 A.3 Declarations of Conformity DESCRIPTION 3G/HD/SD-SDI Video Routers in the Barco MatrixPRO-II series DIRECTIVES this equipment complies with LVD 73/23/EEC EMC 2004/108/EEC HARMONISED STANDARDS appl...
Page 29 - ls
MatrixPRO-II 3G/HD/SD-SDI Routers Rev. 1.1 MatrixPRO-II HD/3G SDI Series –User’s Guide - Rev. 1.1 29 Appendix B Remote Commands Description x X-point Take. ls Status X-point – level. ping Router ping. llist Level list Default Address: 192.168.0.245 port: 4381 Connection to the router will be lost af...
Page 31 - Echo; Echo; Desired action
MatrixPRO-II 3G/HD/SD-SDI Routers Rev. 1.1 MatrixPRO-II HD/3G SDI Series –User’s Guide - Rev. 1.1 31 A single X-point Take command can switch multiple X-points. You will however receive one response for each X-point that is switched. Example: Command Echo Desired action X l1 1 12 X l1 1 12 Switch in...