Audiovox PRO9246ft3 - Manuals

Audiovox PRO9246ft3 – Manual in PDF format online.

Manuals:

Manual Audiovox PRO9246ft3

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6

Summary

Page 2 - NOTE: The keyless entry control module can be programed to either; A . Automatically lock the doors during step 2 above.; Protection While The System Is Armed

-2- Locking / Arming (Active) 1. Turn off the engine, exit the vehicle, and close all doors. 2. Press and release the Lock button on the keychain transmitter. The doors will lock, the LED will begin to flash slowly and the vehicle’s parking lamps will flash once, if the optionalparking light flasher...

Page 3 - VALET SWITCH; Enter the vehicle, and turn the ignition key to the on position.; MANUALLY OVERRIDING YOUR SYSTEM:; USING THE VALET SWITCH MANUAL OVERRIDE; Turn the ignition key to the on position.; Programming Your Custom Override Code:

-3- CAR FINDER: As an added convenience, your system has the ability to flash the parking lights, (If thisoption has been added), on command from the transmitter. This feature is particularlyuseful to help locate your vehicle in a crowded parking lot. To access this feature, simplypress and hold the...

Page 4 - Custom Code Programming Example:; Turn the ignition switch to the on position.

the factory with a pre-programmed override code of 11. To change this default overridecode, do the following: 1. Disarm the system by use of the transmitter, or by use of the emergency override sequence. Turn the ignition switch to the on position. 2. Within 10 seconds, press and release the valet/o...

Audiovox Manuals