Audiovox PRO-9776C - Manuals

Page 2 - YOUR “ CODE HOPPING “ TRANSMITTERS:; will not

128-8786 2 of 12 Page 2 Your Remote Start Alarm System has many features and available options some of whichare selected at time of installation. For your reference, the list on page 9 of this manualshows what features and options have been installed. Consult your installing dealer foroptions that m...

Page 4 - SILENT DISARMING; transmitter for two seconds.; WHILE THE SYSTEM IS SOUNDING

128-8786 4 of 12 Page 4 If the siren did not sound upon disarm, then the chirps have been turned off. Refer to thesection titled ELIMINATING THE ARM/DISARM CHIRPS. NOTE: If the optional 2 step door unlock circuit is installed, when the unlock transmitter buttonis activated, the drivers door only wil...

Page 5 - Programming Your Custom Override Code:

128-8786 5 of 12 Page 5 mechanics. When the system is in valet mode, all alarm functions are bypassed, howeverthe remote panic feature and remote door locks will remain operational. To use the valetmode, the system must first be disarmed either by using your keychain transmitter, or byactivating you...

Page 6 - Custom Code Programming Example:; (The siren or horn will beep and the lights will flash one time.); ELIMINATING THE NORMAL ARM/DISARM CHIRPS

128-8786 6 of 12 Page 6 NOTE: If 15 seconds of inactivity expire, or if the ignition switch is turned off for more than5 seconds during any of the above steps, the unit will revert back to the lastsuccessfully stored code. Custom Code Programming Example: To Change the code from the factory pre-assi...

Page 7 - REMOTE PANIC OPERATION; seconds. The alarm will immediately sound.; PUSH- BUTTON LED RECEIVER SAFETY CONTROL SWITCH; TURBO TIMER MODE

128-8786 7 of 12 Page 7 4. If the chirps were on before you started, the siren will emit 2 short chirps indicating that the chirps are now off. If the chirps were off before you started, the siren will emit oneshort chirp indicating that the chirps are now on. NOTE: If the vehicle battery is disconn...

Page 8 - REMOTE STARTING THE VEHICLE; The System is in the Remote Start Override mode; To Remote Start The Vehicle:

128-8786 8 of 12 Page 8 3) Be certain your foot is off the brake pedal.4) Press the receiver's program/Push-Button switch 2 times within 5 seconds. The parking lights will flash two times indicating the mode was successfully entered.If your parking lights flashed four times, this indicates the turbo...

Page 10 - PROGRAMMED TRANSMITTER NOTIFICATION (PTN)

128-8786 10 of 12 Page 10  Remote Trunk Release  Remote Window Closure  Rear Hatch Release  Right Or Left Slider Doors in An Equipped Van To activate the optional accessory, press the option button on the keychain transmitter.The optional accessory will immediately engage. ADDITIONAL REMOTE FUNC...

Page 12 - SYSTEM FUNCTIONS AT A GLANCE

128-8786 12 of 12 Page 12 ALARM DASH LED INDICATORS RAPID FLASHING = PASSIVE ARMING SLOW FLASHING = ARMED OFF = DISARMED ON SOLID = VALET MODE 3 FLASH... PAUSE = INTRUSION ZONE 3 2 FLASH...PAUSE = INTRUSION ZONE 2 1 FLASH...PAUSE = INTRUSION ZONE 1 ALARM SIREN CHIRP INDICATION 1 CHIRP* = ARM 2 CHIRP...