Audiovox PRO 9232A - Manuals

Audiovox PRO 9232A – Manual in PDF format online.

Manuals:

Manual Audiovox PRO 9232A

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8

Summary

Page 2 - PROTECTION WHILE THE SYSTEM IS ARMED :; vehicle will not start.; DISARMING THE SYSTEM :

128-6626 2 of 8 is automatically ( passively ) arming. As an added convenience, the 30 secondautomatic passive arming will not begin until all doors are closed, allowing passen-gers to exit the vehicle at their convenience.3. In 30 seconds, you will hear a single short chip from the siren, and the v...

Page 3 - INTRUSION WARNING SIGNALS :; intrusion attempt was made through one of the vehicle’s doors.; OPERATING THE EMERGENCY PANIC:; release the unlock button on your keychain transmitter.; USING THE VALET SWITCH :

128-6626 3 of 8 installed, the vehicle’s interior lights will turn on for 30 seconds, or until theignition key is turned on. NOTE: If your system has been programmed for “ passive arming “, then it will begin to re-arm immediately after disarming. This is indicated by arapid flashing of the red dash...

Page 4 - TO ENTER THE VALET MODE:; turns on, indicating valet mode has been successfully entered.; MANUAL OVERRIDE OPERATION:; sound, turn the ignition switch to the “on” position.

128-6626 4 of 8 TO ENTER THE VALET MODE: 1. Disarm the unit by use of the factory transmitter or by use of the manual override sequence. 2. Turn the ignition switch to the “On” position.3. Press and hold the valet/override pushbutton switch for 5 seconds. The LED turns on, indicating valet mode has ...

Audiovox Manuals