Audiovox PAB-1500D - Manuals

Page 2 - INDEX

INDEX Specifications ........................................................................... 1 Precautions .............................................................................. 2 Installation Instructions ............................................................ 3 Wiring Instructions...

Page 3 - Maximum Output Power:

HIGH PERFORMANCE AMPLIFIER This power amplifier has been designed to provide high quality performance witha minimum of maintenance. However, it's performance will only be as good as thecare and quality of components with which it is installed. We therefore advise thatyou read these instructions very...

Page 4 - PRECAUTIONS; The last lead to be connected is the wire to the positive (+; completed and checked all other connections to the amplifier.; and chassis ground must

PRECAUTIONS -2- 1. Although this unit is designed with built-in self-protection circuits, there may be a possibility of damage if it is not wired correctly. Please follow the wiring instructions carefully for the type of system being used. 2. The last lead to be connected is the wire to the positive...

Page 5 - CHECK BEFORE; MOUNTING SURFACE

INSTALLATION INSTRUCTIONS INSTALLATION DIAGRAM 1. Select a mounting area where the amplifier will have sufficient air circulation for proper cooling.I n a d e q u a t e a i r c i r c u l a t i o n w i l l c a u s e t h et e m p e r a t u r e of the amplifier to rise and willtrigger the thermal prote...

Page 6 - WIRING INSTRUCTIONS

-4- WIRING INSTRUCTIONS Wiring your amplifier will depend on the system and speakers you are using. The amplifier is compatible only with a radiohaving a low-level stereo output, thereby instituting a mixed stereo-mono application. The following pages illustrate theinput and output wiring for this t...

Page 7 - wire may be used for this application.; case thinner than #20

-5- WIRING INSTRUCTIONS to an "Accessory" or "Radio" terminal in the car's fuse block. This will turn the amplifier on and off with the ignition key,regardless of whether the car stereo is on or off. The remote turn-on lead does not carry large currents, so #20 #20 #20 #20 #20 gauge ...

Page 8 - MONO INPUT WIRING DIAGRAM

CAR STEREO LOW-LEVEL RCA OUTPUTS RCA TYPE SHIELDED CABLE (NOT SUPPLIED) USE THIS INPUT WIRING WITH OUTPUT WIRING ON PAGE 7 LEFT RIGHT ~ ~~ ~ REMOTE SUB-WOOFER CONTROL UNIT PAB-RC RJ-11 CONNECTOR STANDARD TELEPHONE CABLE RJ-11 CONNECTOR RCA TYPE SHIELDED CABLE (NOT SUPPLIED) LOW LEVEL RCA OUTPUTS TO ...

Page 9 - MONO OUTPUT WIRING DIAGRAM

USE #10 GAUGE WIRE (SEE TEXT) CAR STEREO m m + - MONO SPEAKER(S) OR SUB-WOOFER(S) 2 - 4 OHMS 12 VOLT VEHICLE BATTERY AUTO-ANTENNA LEAD CHASSISGROUND USE THIS OUTPUT WIRING WITH INPUT WIRING ON PAGE 6 CONNECT THIS WIRE LAST EXISTING SCREW OR BOLTCLEAN PAINT, RUST, DIRTOR GREASE FROM AREAFOR GOOD CONN...

Page 10 - OPERATION; Power Indicator

-8- OPERATION 1 Power Indicator The POWER LED functions as both a power and awarning indicator. When the amplifier is off, the indicatoris inactive and appears white. When power is applied tothe amplifier, the LED indicator illuminates green, providedno malfunction is present, thus signifying the am...

Page 12 - Printed in Korea; 2 / 24 MONTH LIMITED WARRANTY

© 2000 Audiovox Corp., Hauppauge, N.Y. 11788 Printed in Korea 128-5784 AUDIOVOX CORPORATION (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof,under normal use and conditions, be proven defective in material or workmanship within 12 m...