Page 2 - INDEX; Page
128-6862A 2 of 16 INDEX Page Operating Instructions ................................................................ 3 - 9 Specifications ............................................................................... 10 CD Changer Controls ..............................................................
Page 3 - OPERATING INSTRUCTIONS; POWER ON/OFF BUTTON; . Pressing the SEL button will select bass (BAS on
128-6862A 3 of 16 OPERATING INSTRUCTIONS -3- 1 1 1 1 1 POWER ON/OFF BUTTON Press this button to turn the unit on or off. If the unit is off and theignition switch is "on", the time of day will be displayed. Also,when the ignition switch is on, the unit will turn on automaticallywhen a disc i...
Page 4 - LEFT/RIGHT BALANCE CONTROL
128-6862A 4 of 16 -4- ADJUST Volume buttons are used to select the desired beeptone function. BEEP OFF indicates no beep tones. BEEP 2NDindicates a tone will sound when a secondary function button ispressed, such as BAND/LOUD, and BEEP ALL indicates a tonewill sound whenever a button is pressed. 4 4...
Page 5 - STATION PRE-SET MEMORIES; bm
128-6862A 5 of 16 -5- 9 9 9 9 9 AUDIO MUTE (MUTE) This button is used to mute the volume from the system. Bypressing the button, a flashing MUTE indication will appear onthe display panel and the volume will be muted. Pressing theMUTE button again, or any other panel button, will return thevolume le...
Page 6 - LIQUID CRYSTAL DISPLAY PANEL FUNCTIONS; TRACK SELECT
128-6862A 6 of 16 -6- station is now set into that preset memory position. Thestation can now be recalled at any time by pressing thatbutton. 4. Repeat the above procedure for the remaining pre-sets on that band and for the other 3 bands on the unit. bp bp bp bp bp LIQUID CRYSTAL DISPLAY PANEL FUNCT...
Page 8 - indication will remain on the display panel to show; ct; cu; FRONT PANEL RELEASE BUTTON
128-6862A 8 of 16 cq cq cq cq cq EQUALIZER SELECTOR (P.EQ) The P.EQ button applies preset sound effects to the unit’s audiooutput signal. The P.EQ button, when pressed, will activate oneof the following operating modes: CLASSICS, POP M, JAZZ,FLAT,or DSP OFF. If the bass and treble levels are changed...
Page 9 - DETACHING THE FRONT PANEL; dn; RESET BUTTON
128-6862A 9 of 16 -9- NOTES ON USE OF FRONT PANEL 1. Make sure the front panel is right-side-up when attaching it to the chassis as it cannot be attached when up-side down. 2. Do not press very hard on the front panel when attaching it to the chassis. No more than light to moderate pressure shouldbe...
Page 10 - SPECIFICATIONS
128-6862A 10 of 16 SPECIFICATIONS Size: 7" W x 2" H x 6-5/8" D 178 mm x 50 mm x 168mm Operating Voltage: 12 volts DC, negative ground Output Power: 160 watts maximum(40 watts x 4 channels) Output Wiring: Floating-ground type designed for 4 speaker use.Front and rear channels CANNOT be co...
Page 13 - ER-1: Indicates that there is no magazine loaded in the CD changer.
128-6862A 13 of 16 If a problem should develop while operating the CD player, an error code (ER-1, ER-2, ER-3, etc.) may appear on the display panel.This can indicate a number of problems with the unit, including a mechanical error or an error in the microprocessor control of theplayer. If an error ...
Page 14 - HANDLING COMPACT DISCS; CARE AND MAINTENANCE
128-6862A 14 of 16 -14- ! Do not attempt to open the unit chassis. There are no userserviceable parts or adjustments inside. ! When the vehicle warms up during cold weather or under dampconditions, moisture may condense on the lens of the discplayer. Should this occur, the player will not operate pr...
Page 15 - NOTES ON DISCS
128-6862A 15 of 16 NOTES ON DISCS Attempting to use non-standard shape discs (e.g.; square, star, heart) may damage the unit. Be sure to use round-shape CDs onlyin this unit. NOTES ON CD-Rs (Recordable CDs)/CD-RWs (Rewriteable CDs): 1. Be sure to use discs with the following marks only for play in t...
Page 16 - 2 / 24 MONTH LIMITED WARRANTY
128-6862A 16 of 16 © 2003 Audiovox Electronics Corp., 150 Marcus Blvd., Hauppauge, N.Y. 11788 Printed in China 128-6862A AUDIOVOX CORPORATION (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof,under normal use and conditions, be prove...