Audiovox HQ6646 - Manuals

Audiovox HQ6646 – Manual in PDF format online.

Manuals:

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8

Summary

Page 2 - TO PROGRAM ADDITIONAL TRANSMITTERS:; Some systems may use a combination push-button LED

128-6516A 2 of 8 2 Some of the more popular options available for the unused OptionButtons of your transmitter are: AS 9554 Remote Garage Door Interface (APS-2K4S only) AS 9075 Remote car starter AS 9153 Remote window roll up AS 9256 Remote trunk release relay Although the most common use of the tra...

Page 4 - REPRIORITIZING A TRANSMITTER’S PROGRAMMING:; Enter the transmitter program mode of the receiver channel to be; OPERATING THE FLASHLIGHT OF APS-2K4FL; the end of the unit to turn on.

128-6516A 4 of 8 4 three times. (Siren emits 1 short chirp indicating channel 1 hasbeen entered) 3. Within 10 Seconds, press and hold the ARM or ARM/DISARM button of the first transmitter you wish to remain stored into thecontrol unit until a single chirp is heard from the siren. (Repeat this for ea...

Page 5 - attention to the proper polarity orientation.; QUICK REFERENCE CHART:; CHANNEL; Flash; The light will turn off when the button is released.

128-6516A 5 of 8 5 BATTERY REPLACEMENT: The transmitter incorporates a small LED visible through the case whichis used to indicate battery condition. You will notice a decrease intransmitter range as the battery condition deteriorates. Transmit-ter battery replacement is recommended at least every 1...

Audiovox Manuals