Page 2 - PLACE THE RUBBER COVER ON JACKS WHEN NOT IN USE.; CAUTIONS
128-6730 2 of 24 NEVER ATTEMPT TO CHARGE ALKALINE OR DRY CELL BAT-TERIES, AS BATTERIES MAY BURST CAUSING PERSONALINJURY AND DAMAGE TO THE PRODUCT. IF RECHARGEABLEBATTERIES ARE USED, SUCH AS NICKEL METAL HYDRIDE(Ni-MH), USE ONLY AUDIOVOX-APPROVED RECHARGE-ABLE BATTERIES. USE OF THE OPTIONAL AUDIOVOXC...
Page 4 - Beep Tone Indicator: Icon appears when beep button confirmation; tone is selected icon disappears when tone is off.; Key Lock Indicator: Icon appears when the keypad is locked. This; function disables keys such as channel up/down, SCAN and MODE.; Signal Strength Indicator: Icon appears when a signal is being; power is set to desired output power on the GMRS channels.; RogerBeep Tone On/Off Indicator: This icon appears when the; Roger Beep tone is on, and disappears when tone is not in use.
128-6730 4 of 24 4 Model GMRS7001-2 DISPLAY 1. Beep Tone Indicator: Icon appears when beep button confirmation tone is selected; icon disappears when tone is off. 2. Key Lock Indicator: Icon appears when the keypad is locked. This function disables keys such as channel up/down, SCAN and MODE. 3. Mon...
Page 5 - Powering the transceiver:; There are three methods of powering the GMRS7001-2:; WARNING: Do not attempt to recharge Alkaline batteries.
128-6730 5 of 24 5 12. Small Segment Display: Displays the CTCSS tone option for each main channel from 01-38. 13. Dual Watch Mode Indicator: Indicator appears when dual watch mode is active. 14. Voice Activated Transmission (VOX) Indicator: This function allows hands free conversation. The indicato...
Page 7 - Do not mix old and new batteries.; WEATHER BAND
128-6730 7 of 24 7 The following guidelines will improve performance and provide longeroperating times for the GMRS7001-2: 1. Do not mix old and new batteries. 2. The use of alkaline-type batteries is recommended to provide thelongest operating time. 3. Do not mix alkaline, standard (carbon-zinc) or...
Page 8 - Do not transmit if you hear conversation.
128-6730 8 of 24 Controls: Power On/Off/Keylock (13) ButtonPress and hold the power on/off button ( ) for at least 2 seconds. You will hear a confirming melody to indicate the unit is on. To turn the unitoff, press and hold the button for at least 2 seconds. When the unit is onand the button is pres...
Page 9 - ) will display the relative strength of the transmitted signal.
128-6730 9 of 24 9 PTT Button to allow reception of incoming signals. It is not possible totransmit and receive at the same time. The Transmit Signal Level indicator( ) will display the relative strength of the transmitted signal. When receiving an incoming signal, the BUSY icon will appear in the u...
Page 10 - Operating Modes and Features; seconds to turn on power.; Channel Selection
128-6730 10 of 24 10 Operating Modes and Features GMRS Operation: - From GMRS/FRS standby mode, press and hold the ( ) button for 2 seconds to turn on power. - Press the MODE button so the Channel number flashes.- Select the desired channel with the Up (10) and Down (11) Buttons. When receiving a ca...
Page 12 - Transmit Power Selection Mode; - Press the Up or Down button to toggle between the High and Low se-; VOX Sensitivity Level Selection; - Press the MODE button 4 times until the V; icon appears on the dis-; play accompanied by the flashing VOX icon and the numeral 1, 2 or 3.; Dual Watch Mode
128-6730 12 of 24 12 Transmit Power Selection Mode This feature permits selection of the transmitting power level to highor low. When operating on FRS only channels (8-15), no power selec-tion is possible or is displayed. Using low power, the unit will have alower transmit range, but battery life wi...
Page 13 - Key Tone; - From GMRS/FRS standby mode, press the MODE Button 6 times until
128-6730 13 of 24 13 during a received transmission will set the unit to transmit on the samechannel. Pressing the PTT button when no signal is received will set theunit to transmit on the primary channel.To set the Dual Watch Mode: - From GMRS/FRS standby mode, press the MODE button 5 times; DW app...
Page 14 - - Press the Up or Down Button to preview and hear the 3 available call; Channel Scan Operation
128-6730 14 of 24 14 Roger Beep Tone The Roger Beep is a tone which is automatically transmitted whenever thePTT button is released. This tone alerts the receiving party that the trans-mission has been terminated intentionally.To enable and disable the Roger Beep tone: - From GMRS/FRS standby mode (...
Page 15 - Auto Key Lock Selection Mode
128-6730 15 of 24 15 To enable the channel scan mode: - From GMRS/FRS standby mode, momentarily press the SCAN But ton; (SCAN) will appear on the LCD display. - The radio will display each channel (1-22) in ascending order as the scan mode operates to find an active main channel. - If the unit doesn...
Page 16 - onds or until the VOX icon appears steady on the display.; until the VOX icon disappears from the display.; Weather Alert Mode; - From Weather Band standby mode, press the MODE button once to
128-6730 16 of 24 16 VOX Enable OperationThis option enables you to have hands-free conversation. Your voice ornearby sound is detected and the radio transmits without the need topress the PTT button.To enable VOX operation: - From GMRS/FRS standby mode, press the SCAN button for 3 sec- onds or unti...
Page 18 - Warning; • Do not operate the transceiver unless you are licensed to do so.; atmospheres as sparks in such areas could result in an explosion.; • Do not place your radio in front of a vehicle’s air-bag. If the air-bag
128-6730 18 of 24 Warning • Do not operate the transceiver unless you are licensed to do so. • Remove the batteries from the transceiver if it is not expected to be used for long periods. This will eliminate the possibility of chemicals leakingfrom the batteries and corroding the transceiver. • Avoi...
Page 19 - Troubleshooting; P r o b l e m
128-6730 19 of 24 Troubleshooting 19 Weak or no Weak batteries Charge or replace batteries signal received Channel and privacy Adjust the transceiver’s code not set the same settings to match those as target transceiver settings of the targettransceiver Volume level too low Increase volume level PTT...
Page 20 - General; Power Supply; Receiver
128-6730 20 of 24 20 General Frequency Range: Channels 1-7 (Shared with FRS Radios) Refer to frequency chart on next page Channels 8-14 (FRS only) Refer to frequency chart on next page Channels 15-22 (GMRS only) Refer to frequency chart on next page Channel Spacing 12.5 kHz Privacy Codes 38 for each...
Page 21 - NOTE: Channels 1 through 7 are shared with FRS radios.; Main Channel Frequencies:
128-6730 21 of 24 21 This transceiver complies with FCC regulations for use in the UnitedStates of America. Use in other countries may be prohibited or restrictedby local regulation. Please check with the local regulating agency be-fore using this device outside the United States of America. NOTE: C...
Page 22 - oF
128-6730 22 of 24 * oF = No Tone 22 Continuous Tone Coded Squelch System Tone Frequencies (in Hz) CTCSS Freq. Hz CTCSS Freq. Hz 1 67.0 2 0 131.8 2 71.9 2 1 136.5 3 74.4 2 2 141.3 4 77.0 2 3 146.2 5 79.7 2 4 151.4 6 82.5 2 5 156.7 7 85.4 2 6 162.2 8 88.5 2 7 167.9 9 91.5 2 8 173.8 1 0 94.8 2 9 179.9 ...
Page 23 - 0 DAY LIMITED WARRANTY
128-6730 23 of 24 90 DAY LIMITED WARRANTY AUDIOVOX CORPORATION, 150 MARCUS BLVD., HAUPPAUGE, NEW YORK 11788 1-800-290-6650 128-5385A Applies to Audiovox Family Radio and General Mobile Service Products. AUDIOVOX CORPORATION (the Company) warrants to the original retail purchaser of thisproduct that ...