Audiovox GMRS-3000PK - Manuals

128-6476 5 of 28 1. Handset Battery ChargeContacts 2. Built-in Speaker 3. Up/Down Channel/VolumeButtons 4. MODE Button 5. Antenna 6. Combination Transmit Indicator(Red)/Receive and Monitor Indicator (Green)/Backlighting (Red/Green) 7. DC 9V Charger Input Jack 8. Liquid Crystal Display (LCD) GMRS-300...

128-6476 6 of 28 6 GMRS-3000PK Handset and Base Station Displays 1. Beep Tone Indicator: Icon appears when beep confirmation tone is selected; icon disappears when tone is off. 2. Monitor Indicator: Icon appears when the Monitor ( M ) button is pressed and the channel monitor function is activated. ...

128-6476 7 of 28 7 10. Battery Level Indicator: Icon indicates the battery charge level. 11. Emergency (EMG) Indicator: EMG icon appears when the EMG/M button pressed. (The emergency frequency is not monitored byauthorities.) 12. Weather Mode Indicator (Base Station Only): This icon appears steady o...

128-6476 8 of 28 Powering the Transceivers: Your GMRS-3000PK handset transceiver operates on four AAA batteries.Alkaline batteries will provide slightly better performance than the suppliedrechargeable batteries. Only Audiovox approved rechargeable batteriescan be recharged in the handset transceive...

128-6476 9 of 28 9 3. Various Brands of Rechargeable Batteries - Use of the Base Station charging feature with other brands of rechargeable batteriesis not recommended, as battery charging times will vary with differ-ent brands of batteries. Refer to the manufacturer’s instructions forcharging other...

128-6476 11 of 28 11 Base Station Transceiver Charging Setup For the Handset Transceiver When the handset transceiver is equipped with rechargeable NiMH batter-ies (supplied), they may be charged using the base station setup as fol-lows: 1. Position the handset transceiver in the base station cradle...

128-6476 12 of 28 Controls: Power On/Off Button Press and hold the power on/off button ( ) for at least 2 seconds. You will hear a confirming melody to indicate the unit is on. To turn the unitoff, press and hold the button for at least 2 seconds. Adjusting the Volume W i t h e i t h e r t r a n s c...

128-6476 13 of 28 13 Channel/Volume button ( ) to decrease volume. The display will indicatethe current volume level between 1 and 7 by the small number in the icon( U 05 ). Monitor/Display Backlight Button This button is used to check activity on the current frequency beforetransmitting. Check acti...

128-6476 14 of 28 14 Up Channel/Volume Button In the standby mode, pressing this button will increment the listeningvolume. When in function edit mode this button will be used to adjust theunit’s settings. Down Channel/Volume Button In the standby mode, pressing this button will decrement the listen...

128-6476 15 of 28 15 - Press and hold the PTT button to transmit, then speak into the microphone clearly and slowly. The Transmit LED lights red . - Release the PTT Button to receive.- Communication can only be accomplished when the channel and CTCSS tone frequency of at least two parties are the sa...

128-6476 17 of 28 17 we do recommend that you not change this setting unless it proves to be necessary in your particular situation. To access the transmitter power selection function, the selected channel must be either GMRS/FRS (1-7) or GMRS only (15-22). Select the desiredpower as follows: - From...

128-6476 19 of 28 19 - Press the Up or Down Button to toggle the key tone feature On or Off.- Press the PTT button momentarily to confirm selection. When the key tone feature is on, the Bell icon appears steady on thedisplay, and the beep tones sound in response to button activation. Caller Identifi...

128-6476 20 of 28 20 the scan is interrupted and will return to scan mode 5 seconds after recep-tion is terminated. NOTE: While the scan function is active, the MODE button will beinoperative. The scan mode will reduce the overall battery lifesince the battery save function is overridden. To enable ...

128-6476 21 of 28 21 To access the Auto Key Lock selection menu: - From GMRS/FRS standby mode, press and hold the Scan Button for over 2 seconds to Lock the Auto Key function; the ( ) icon appearson the display. - The Power, PTT, Up/Down and Monitor Buttons are not effected.- To unlock the Auto Key ...

128-6476 23 of 28 2. The FRS-3000PK has been designed to maximize performance and improve transmission range in the field. To avoid interference, itis recommended that you do not use the units closer than 5 feet apart. 3. For best transmission results, always keep your mouth about 2-3 inches from th...

128-6476 24 of 28 Troubleshooting 24 Weak or no Weak batteries (mobile unit) Charge or replace batteries signal received Channel and privacy Adjust the transceiver’s code not set the same settings to match those as target transceiver settings of the targettransceiver Volume level too low Increase vo...

128-6476 25 of 28 General Frequency Range: Channel 1-7 (Shared with FRS) Refer to Frequency Chart Channel 8-14 (FRS only) Refer to Frequency Chart Channel 15-22 (GMRS only) Refer to Frequency Chart Channel Spacing 12.5 kHz Privacy Codes 38 for each main channel Dimensions (W x D x H): Handset 2.10 i...

128-6476 26 of 28 26 Main Channel Frequencies: E P Y T / L E N N A H C ) z H M ( Q E R F E P Y T / L E N N A H C ) z H M ( Q E R F S R F / S R M G 1 5 2 6 5 . 2 6 4 S R F 2 1 5 2 6 6 . 7 6 4 S R F / S R M G 2 5 7 8 5 . 2 6 4 S R F 3 1 5 7 8 6 . 7 6 4 S R F / S R M G 3 5 2 1 6 . 2 6 4 S R F 4 1 5 2 1...

128-6476 27 of 28 27 * oF = No Tone 1 162.550 6 162.500 2 162.400 7 162.525 3 162.475 8 * 161.650 4 162.425 9 * 161.775 5 162.450 10 * 163.275 * Canadian Marine Channel Freq. MHz Channel Freq. MHz Weather Channel Frequencies: CTCSS Freq. Hz CTCSS Freq. Hz 1 67.0 20 131.8 2 71.9 21 136.5 3 74.4 22 14...

128-6476 28 of 28 28 90 DAY LIMITED WARRANTY AUDIOVOX CORPORATION, 150 MARCUS BLVD., HAUPPAUGE, NEW YORK 11788 1-800-290-6650 128-5385A Applies to Audiovox Family Radio and General Mobile Service Products. AUDIOVOX CORPORATION (the Company) warrants to the original retail purchaser of thisproduct th...