Audiovox FR140 - Manuals

To Receive 1. Turn the power on. 2. Check the battery condition on the display. If the icon is displayed, charge or replace the batteries. 3. Set the desired channel and CTCSS code. 4. Adjust the volume control to the desired listening volume by pressing and holding the monitor button while turningt...

To Transmit 1. Set the desired channel.2. Press and hold the PTT (Push-to-Talk) button while speaking slowly and clearly in a normal voice, approximately 2 to 3inches from the microphone. 3. The TX icon will be displayed while transmitting. 4. Release the PTT button when you finish speaking to recei...

Channel Scan This feature allows the transceiver to automatically check all14 channels for activity. Press the menu button twice or until“SC An ” is shown on the display. Pressing the UP or DOWN buttons will cause the transceiver to immediately begin scanningthe channels for activity. When a signal ...

WARNING Remove the batteries from the transceiver if it is not expected tobe used for long periods. This will eliminate the possibility ofbattery acid leaking from the batteries and corroding the transceiver.Avoid exposing the unit to water or extremes of temperature.Do not use this device in or nea...

Applies to Audiovox Family Radio Service Products. AUDIOVOX CORPORATION (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 90 days from the date o...