Audiovox FPE2706DV - Manuals

Product Features This product is designed with movable Disc Tray. The Disc Tray can be installed in two different positions. The movable Disc Tray offers you the flexibility to choose which direction to insert your DVD in order to maximize your space. The unit incorporates high-resolution LCD displa...

Disc Information Discs Formats Supported By This Player DISC LOGO CONTENTS SIZE MAXIMUM TIME 133min(SS-SL) 242min(SS-DL) 266min(DS-SL) DVD Audio+Video (active picture) 12cm 484min(DS-DL) CD Audio 12cm 74min JPEG Still high resolution 12cm The operating method of some DVD discs is specified by the so...

Front Panel Front and Right View 1. Disc Tray Slot Insert disc into this slot. 2. SD/MS/MMC card port Insert SD/MS/MMC card into this slot. 3. USB Port Connecting to the USB device. 4. 27" Color TFT screen 27" color TFT screen clearly shows your picture. 5. SOURCE button Press to enter the I...

Rear Panel Rear View Open the back cover on the right side of the unit’s rear panel, all the jacks will appear, as shown on the figure below: 1. Y/Pr(Cr)/Pb(Cb) and L/R audio Input Jacks Connections for the Y/Pr(Cr)/Pb(Cb) inputs in AV3 (Component) mode. 2. Y/Pr(Cr)/Pb(Cb) and L/R audio Input Jacks ...

Remote Control Remote Control Buttons Functions For TV Operation 1.POWER button Press to enter or exit the standby mode. 2. 0~9 Number buttons Press to select numbers. 3. MTS button In TV mode, press to shift among SAP, Mono or Stereo mode. 4. VOL +/- button Press to increase or decrease the volume....

Remote Control (Continued) Remote Control Drawing For DVD Operation 1. Play button Press to play the disc under DVD mode. 2. Pause button In DVD mode, Press to pause the playback or start step frame by frame playback. Press the PLAY button to resume normal playback. 3. Fast Reverse button In DVD mod...

Remote Control(Continued) Preparation of Remote Control Softly push the back cover plastic latch to open the battery compartment. Insert two batteries (1.5V, size AAA), please make sure the polarity matches the marks inside the compartment. Softly press the back cover to close it. Under normal use t...

Special Features of the DVD Module Note: before removing or installing the DVD module, unplug the unit from the AC power source. The supports to install the extended functional modules are located in two different positions (above and to the side) and supports the installation of two functional modu...

System Connections Do not connect the power cord until all other connections have been made. Ensure that you observe the color cables when connecting audio and video cables. Before connecting, open the cover on the right side of the unit’s rear panel. Connecting To External AV Signal Source (AV1) Us...

System Connections Connecting To External AV Signal Source (AV2) Use the audio and video cable to connect the input jacks on the right side of the unit’s rear panel to the external AV signal source. Also use the S-Video cable to connect the S-Video input jack on the right side of the unit’s rear pan...

System Connections Connecting to HDMI Output Device This unit can be connected to an AV device with HDMI output. See the below figure for details: After connecting, turn on the power to the unit and the external HDMI output device, press the Input button to activate the Input menu, then select HDMI ...

System Connections Connecting to External AV Device (AV Out) Use the audio/video cables to connect the audio and video output Jacks on the right side of the rear panel to the external AV device. Special Notes: The features of this A/V equipment allows you to connect to other A/V equipment. Care shou...

System Connections Connecting to Digital Amplifier The unit is equipped with an optical digital audio jack that can be connected to a digital amplifier, (see the figure below) - 18 -

System Connections Connecting to PC The unit can be connected to a PC (personal computer) via a VGA cable. Follow the instructions and figure below to connect to a PC: 1. Connect one end of the VGA cable to the VGA input connector on the right side of the unit’s rear panel. 2. Connect the other end ...

System Connections (Continued) Connecting to TV Signal Input This unit can be connected to a TV signal output source via the 75 Ω antenna jack on the rear panel. After connecting, turn on the power to the unit, press the Input button and select TV mode. Connecting to AC Power One end of the AC power...

System Connections (Continued) Connecting to Headphone This unit can be connected to a headphone for private listening. See the below figure for details: Note: Turn down the volume before connecting the headphone. - 21 -

Input Source Selecting The unit supports multiple video modes, which the user selects via the input menu. Press the Input button to activate the Input menu, the screen will display the following: Press the direction button to select the desired video mode, followed by pressing the Enter button to ac...

System Setup and Operation Preparations 1. Connect the unit to the required power, antenna and video sources then press the POWER button to turn on the unit. 2. Press the Input button to display the Input menu, then press the or button to select TV. Follow by pressing the Enter button to activate th...

System Setup and Operation (Continued) Manual Ch Search Press the ▲ or ▼ button to select the Manual Ch Search , then press the Enter button to activate the Manual Channel SetMenu, refer to the figure to the right : In the menu, press the direction buttons to select items, press the Enter button to ...

System Setup and Operation (Continued) Selecting an Audio Parameter for Setup Press the Menu button to activate the main setup menu, as shown on the right: Press the ▲ or ▼ button to select the Audio then press the ◄ or ► button to enter the setup menu. Press the ▲ or ▼ button to select one of the A...

System Setup and Operation (Continued) Selecting a Feature for Setup Press the Menu button to activate the main setup menu, as shown on the right: Press the ▲ or ▼ button to select the Feature then press the ◄ or ► button to enter the setup menu. Press the ▲ or ▼ button to select one of the features...

DVD Player Operation Disc Loading Steps: 1. Press the POWER button to turn on the power. Press the Input button and select DVD mode, press the Enter button to select DVD mode. 2. Insert the disc with its printed side facing you into the disc tray. (Refer to the figure below.) 3. Disc will automatica...

DVD Player Operation (Continued) CD Playback The player will play all tracks on a CD disc by default. You can use the and (PREV/NEXT skip) buttons, or number buttons to select a specific track. Stop ■ Press the ■ Stop button once to stop playback and then press Play button to resume. Press this butt...

DVD Player Operation (Continued) JPEG Playback JPEG is a common picture format that requires small amounts of storage per image and has low loss in resolution. Hundreds of pictures can be stored on a disc in this format. In order to view JPEG photo albums, you can ask your film development company t...

DVD System Setup Preparations 1. Press the Input button and select DVD, press the Enter button to activate DVD mode. 2. Press the Setup button on the remote control to display the settings menu. The menu includes General setup, Audio setup, Video setup, Preference. 3. Press the direction buttons on ...

DVD System Setup (Continued) Media Center 1. Press the ▲ or ▼ direction buttons to select Media Center . 2. Press the Enter button to enter the setup. 3. Use the ▲ or ▼ direction buttons to select DVD, USB, SD/MMC or MS. 4. Press the Enter button again to confirm selection and return. Audio Setup Pa...

DVD System Setup (Continued) Dynamic 1. Press the ▲ or ▼ direction buttons to select Dynamic . 2. Press the Enter button to enter the setup, the screen will display as shown on the left: 3. Use the ▲ or ▼ direction buttons to adjust. 4. Press the Enter button again to confirm setting and return. 5. ...

DVD System Setup (Continued) Contrast 1. Press the ▲ or ▼ direction buttons to select Contrast . 2. Press the Enter button to enter the setup mode, the screen will display as shown on the left: 3. Use the ◄ or ► direction buttons to adjust the level. 4. Press the Enter button to confirm setting and ...

DVD System Setup (Continued) Subtitle 1. Press the ▲ or ▼ direction buttons to select Subtitle . 2. Press the Enter button to enter the setup mode, see the left figure: 3. Press the ▲ or ▼ direction buttons to select Subtitle language. 4. Press the Enter button again to confirm setting and return. D...

Troubleshooting SYMPTOM CHECK ITEM The player does not play. Make sure disc is loaded in. Make sure disc is loaded with label facing you. Make sure disc is not dirty or warped. Make sure the player’s region code is the same as region code of DVD disc. Make sure water condensation has not occurred. I...

Specifications TFT-LCD Resolution 1366x768 TFT-LCD Screen Size 27 inches Laser Wavelength 780/650 nm Video System NTSC Frequency Response 20Hz 20kHz ±2.5dB Audio Signal-to-noise Rate ≥ 85dB Audio distortion+noise ≤ 70dB (1kHz) Channel Separation ≥ 70dB (1kHz) Dynamic Range ≥ 80dB (1kHz) Audio Out An...